Lathes

WECO S 206E- II

Condition: like new (used), CNC Swiss-type lathe Weco S 206 E II Machine Dkodpfxsy A Sghj Aa Nel Bar feeder Tools The machine has 7,000 operating hours

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Dsdpfxjydaade Aa Nokl Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: good (used), Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Strunguri Arad, lead screw and feed screw lathe type SNA560x2000 Dsdpfxeyaypkj Aa Nekl -Turning length: 2140 mm -Turning diameter over bed: 600 mm -Turning diameter over support: 330 mm -Spindle bore: Ø 65 mm -Spindle speeds: 16 - 1600 rpm -Three-jaw chuck: Ø 310 mm -Tailstock mount: MK5 -Drive motor: 11 kW -Accessories included, see photos -Dimensions: 3700/1050/H1400 mm -Weight: 3600 kg

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Dksdpfx Ajw Ebdboa Nsl Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY Dkedpfsxlum Tjx Aa Nol - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 34143 [h] - Number of working hours : 26657 [h] - Number of spindle hours : 15552 [h] EQUIPMENT - CNC : Fanuc 30i-model A - HFT (High Frequency Turning) - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : FMB turbo 3-26 / 3200 A

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 6,000 rpm, travel distance Z-axis: 700 mm, spindle motor power: 32,000 W, controller manufacturer: SIEMENS, controller model: C200-sl, number of axes: 5, This 5-axis Index C200 was manufactured in 2023, offering advanced capabilities for horizontal turning. Ideal for precision and efficiency in metalworking, this machine represents a significant asset for enhancing production quality. Consider the opportunity to buy this Index C200 horizontal turning machine. Contact us for more information. Additional equipment • Software options: OPC UA for master computer connection (max. 200 variables). ChipMaster cycle for chip breakage control. • Environmental data: Noise level: 73.8 dB(A) Machine Benefits Technical Machine Benefits • Control system: based on sinumerik 840d solutionline (sl) with sinamics s120 drives. 18. 5" tft color display with pct-touch (ip65). Siemens operate user interface in german. • Interfaces: 4x usb 2. 0 (2 on the control panel, 2 in the control panel). Network-capable for nc data transfer (logical drives). • Safety: siemens safety-integrated (profisafe). • Turret mechanics: hydraulic locking, ac motor with face gearing. Drive power per tool carrier: 10 kw (25 % ed), max. 8,000 rpm. • Tool holder: cylindrical shank d25x48 (din69880) with w-slots for higher repeat accuracy. Driven tools possible in every station (only rotating in working position). • Cooling unit: 13 kw for hydraulics, spindles and control cabinet. Connection for cooling water (20°c ±2°c, 30 l/min, glycol 25 %). • Chip conveyor: hinged belt conveyor (made by knoll) with 180-liter container, discharge height 840 mm. Cooling lubricant system: 750-liter container, 8-bar/20-80-bar pumps. • Bar loader interface: unimag4-compatible (external loaders require specific cover). Maximum bar length: 1,035 mm (short bar operation). Gantry pick-up device: pneumatic gripper (Ø 10-90 mm, max. 3. 5 kg). Conveyor belt with switch for finished parts/remaining parts. Extra Information Control Unit Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Rated power: 54kW Connected load: 65kVA Rated current: 94A Max. back-up fuse: 100A Main Drive Main spindle and counter-spindle Spindle head mounting: OD 140mm, ID 85mm Front bearing diameter: 110mm Torque max. (100%/40%): 125/170 Nm Clamping pressure min./max.: 8/80 bar Piston area pressure: 57cm² Piston area tension: 57cm² Dkjdpfx Aaoyyuvtj Nol Compressive force max.: 45600 N Tensile force max.: 45600 N C-axis: Drive: Hollow shaft motor of the spindle; angle measuring system directly on the spindle Position spread (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool carrier 1 X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 320mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 2 X-axis working path: 110mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Z-axis working path: 550mm Z-axis rapid traverse: 50m/min Z-axis acceleration: 9m/s² Z-axis feed force: 5000N Y-axis working path: 100mm Y-axis rapid traverse: 15m/min Y-axis acceleration: 9m/s² Y-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48 Tool carrier 3 X-axis working path: 180mm X-axis rapid traverse: 30m/min X-axis acceleration: 9m/s² X-axis feed force: 5000N Stations: 14 with cylindrical shank holder D25x48

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 21047A, spindle speed (min.): 10,000 rpm, turning length: 210 mm, overall weight: 2,050 kg, bar passage: 20 mm, equipped with Iemca Boss 338HD/32 barfeed new in 2017 – fixed and rotating bushing – evacuation of long pieces through the sub spindle + external apparatus – chip conveyor – some collets and guide bushings – Fanuc 32i-B Control. Dkodpowt Th Ijfx Aa Nol

Condition: used, Year of construction: 2000, turning diameter over bed 440 mm turning diameter over slide rest 270 mm turning length 1.500 mm center height over bed 220 mm digital readout FAGOR 3 Achsen turning diameter in the gap 620 mm centre distance 1.500 mm bed width 280 mm spindle bore Ø 52 mm turning speed range 30 - 2.360 U/min 3-jaw-chuck diameter 250 mm quick change toolholder KLOPFER Typ GX2B drive capacity - spindle motor 6,3 kW taper in tailstock-quill MK 4 dia. of quill 60 mm quill stroke 200 mm voltage 380 V Dsdeykb Hfopfx Aa Nokl total power requirement 6,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2,90 x 1,10 x 1,75 m - Serial-No.: D8KK0633 - 3-axis digital readout FAGOR - Quick-change steel holder - rapid clamping boring chuck RÖHM 1-13 mm - Coolant device

Condition: ready for operation (used), Year of construction: 2015, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,200 kg, total height: 1,700 mm, workpiece diameter (max.): 32 mm, number of axes: 7, This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning. Additional equipment • High Pressure Coolant System: Hydrajet BF20-2000 • Mist Extraction Unit: Absolent A.Mist 10S • Fire Suppressor: Stat X • Signal Production Tower: Werna Djdpfx Asyi Emtoa Njkl Machine Benefits Qualitative Machine Benefits • Includes comprehensive safety and environmental management systems (fire suppressor, mist extraction) Technical Machine Benefits • Rapid feed rate 24m/min, maximum spindle speed 7000 rpm, maximum driven tool speed 6000 rpm Extra Information Manuals included Machine still under power Dimensions Machine Depth 2250 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, spindle speed (min.): 8,000 rpm, bar passage: 32 mm, Machining Data Maximum bar capacity: 32 mm Maximum turning length: 320 mm Maximum drill diameter (front): 12 mm Maximum tapping size (front): M12 Main spindle speed: up to 8,000 rpm Dedexb R R Hepfx Aa Nekl Sub spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Dimensions & Weight Dimensions (W x D x H): 2,860 mm x 1,465 mm x 1,900 mm Weight: 4,300 kg 10-position turret Rotating tools for complex machining operations FMB Turbo 3-36