Lock insertion machine for furniture locks

Weeke WEEKE SEM/1

Condition: good (used), Sumbel Enano 150 gluing machine Lhjdpfx Aou Umapedwjb The machine is fully operational ready for production. Like a new one. It is the most valued brand among small gluing machines. An ideal solution for the production of covers, decorative packaging, etc. Production Germany. The machine works on cold glue Copper cylinders. Smooth adjustment: glue thickness, gap thickness. A set of separators, Simple cleaning without the need for tools. Working width 150mm 230V power supply Weight 30kg

Condition: new, Year of construction: 2025, working table size: 3000 mm x 1500 mm emergency stop switch: no operational vacuum: -0,85 bar vacuum pump output: 40 m³/h pump capacity: 1,5 kW noise level: 70 Db heating system temperatur: max. 200 °C heating system: 16 kW machine length: 3100 mm machine width: 1650 mm machine height: 1100 mm weight: 850 kg Lhedpsi Hplkofx Adweb

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AL1/003895, travel distance X-axis: 2,949 mm, travel distance Y-axis: 1,353 mm, input voltage: 400 V, Working area: 2500 x 1240 mm Z-axis travel length: 200 mm Passage height: 180 mm Drilling unit: Ledpfxoxxik Hj Adwehb Drill head with 10 + 4 spindles 6 individually selectable vertical spindles in X 4 individually selectable vertical spindles in Y 2 horizontal spindles in X (1+1) 2 horizontal spindles in Y (1+1) Spindle speed: 4,000 rpm Power: 2.2 kW Pitch: 32 mm Drill holder: M10 with 11 mm mounting face Extraction port: D=160 mm Milling spindle: Tool holder: HSK 63F Spindle speed: 1,500 – 24,000 rpm, stepless via inverter Motor power: 6.6 kW (9 HP from 12,000 rpm (S1)) Right/left rotation Ceramic bearings Prepared for automatic change of angle heads Grooving saw unit: Fixed in X-direction (longitudinal) Power: 2.2 kW (3 HP) Speed: 6,000 rpm Max. saw blade diameter: 160 mm Saw blade thickness: approx. 3.2–6 mm Saw blade bore: 30 mm Extraction port: D=200 mm Worktable: 4 supports, 900 mm, stepless manual adjustment in X 12 round vacuum pods, D=110 mm, stepless adjustment in Y (2 pods per support) 2 stops in X (1x left / 1x right) 1 stop in Y per support (total 6) Additional right-side stop with roller track for extending X-axis to 3,230 mm (2 clampings) Retractable reference stops are CNC-controlled Pendulum operation (2 working zones) Further technical data: Total connected load max.: 16 kW Recommended fuse: 64 A Power supply: 400 V (50 Hz) Compressed air: 7 bar System pressure: 10 bar Compressed air consumption: 150 nl/min Central extraction port with flap control: D=250 or D=300 mm Extraction speed: 30 m/sec Air consumption: 3,400 m³/h Vacuum: 3,000 Pascal Machine weight: approx. 2,700 kg Required floor space: approx. 6,400 x 2,970 mm Loading dimensions: 4,400 x 2,200 x 2,500 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vacuum membrane press ARTEX VPS - 300 350x150 TECHNICAL DATA - dimensions of working table length/width 3500x1500mm - working temperature ±40-60°C - maximum temperature ±80°C - additional heating with air - power of heaters - 3×1,5kW 4,5kW Ledpfx Aotp Td Todwehb - power of vacuum pump 0,75kW - capacity of vacuum pump 25m3/h - noise level 67dB - dimensions L/W/H 3900x1800x1400mm - weight about 550kg

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Ljdpfx Adexy Tmnjwjhb

Condition: used, machine/vehicle number: 19028, elektrische Pappschere - electric Board Cutter Robust PS 80Serial-No. 19028 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ledjh Axtdepfx Adwshb On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access Lhjdjmb U T Hspfx Adwjb • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: used, Year of construction: 2012, Nesting machining center with automatic unloading PC-based numerical control - ALPHCAM user interface software + Alphacam Nesting software X-axis work range: 4200 mm Y-axis work range: 2100 mm Nesting work table One 3-axis vertical electrospindle, 9 kW, with automatic tool changer, HSK F63 type cones Automatic tool changer with 6 positions DH 17 drilling head with 17 vertical spindles Automatic unloading system with motorized conveyor Adhesive label printing and application system with labeler Protection and safety system with perimeter grilles Safety system with front safety mats Automatic lubrication system Air conditioning system for cooling and cleaning the machine control Three 250 m3/h vacuum pumps TECHNICAL DETAILS TO BE VERIFIED Lhsdpfx Adjwc Uwijwsb

Year of construction: 1997, condition: excellent (used), Safety work table Make WIBO White type Jekt TCRJO 180/98 with gradation made of stainless steel Lhodpfx Adehk St Aswsb working space : Depth 920 mm height 1200 mm width 1800 mm working height 600 mm total dimensions : Depth 1080 mm height 2100 mm Height with suction 2550 mm width 1800 mm

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of drilling spindles: 14 Ledpfx Ajx A Tinodwehb Total number of tool changer positions: 6