Center lathe

WEILER Commodor

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet Nsdpfxeymznhe Ag Njwc >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Year of construction: 1990, condition: used, total length: 4,800 mm, total width: 1,700 mm, total height: 2,000 mm, Empty weight: 5.500 kg Price: On request - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 3242 - Drive system: CNC - Control system brand: Fanuc - Swing over bed [mm]: 520 - Carriage turning diameter [mm]: 350 - Distance between centres [mm]: 1125 - Spindle bore [mm]: 50 - Min. spindle speed [rpm]: 42 - Max. spindle speed [rpm]: 4200 - Options: Chip conveyor, Turret Nwjdpfox Ivnyox Ag Nec - └ Tool magazine [pcs.]: 10 - X-axis travel [mm]: 1090 - Y-axis travel [mm]: 160 - Transport dimensions: 4800mm x 1700mm x 2000mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Weiler Commodor in good working condition. Specifications: Swing diameter over bed: 380 mm Swing diameter over cross slide: 190 mm Distance between centers: 1000 mm Spindle bore: 56 mm Speed: 25–2000 rpm Motor power: 4 kW Nedpfjx Ngpdox Ag Nowc Machine equipped with: 3-axis digital readout 3-jaw chuck with multiple jaws Coolant system Multifix quick-change tool post with 4 holders Collet system with collets Bed stop

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by Heidenhain – Very Good Condition! Technical Data: >> Year of manufacture: 1991 | Machine No.: 3140 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm Nsdpfsylh Ncex Ag Nowc >> Short-taper spindle nose DIN 55027 size 6 with bayonet lock >> Tailstock taper: MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake selectable >> Motor power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Includes and features: >> Heidenhain 3-axis digital readout >> 200 mm three-jaw chuck, 2 sets of jaws >> Multifix size B with 3 tool holders >> Drill chuck, live centre >> Bed stop >> Machine feet About the machine: For sale is a Weiler Commodor lathe in very good, fully operational condition. The machine comes from a state-operated workshop and has seen little use. The Commodor is one of the largest manual lathes manufactured by Weiler – a very robust and powerful machine. The 3-axis digital readout by Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm Nsdpfxsb N Eh He Ag Nswc sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: used, Year of construction: 1979, functionality: fully functional, Leadscrew and feed rod lathe Make: WEILER Model: COMMODOR Year: 1979 Technical Data Nwodpfx Agjxt Ngqj Njc Manufacturer: Weiler Model: Commodor Centre distance: 1000 mm Swing over bed: 400 mm Spindle bore: 50 mm Speed range: 63-2000 rpm Drive power: 4 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: approx. 1.5 t Equipment • 3-axis digital readout • Drill chuck • Röhm 3-jaw chuck, D 200mm • Multifix toolpost • The additional 3-jaw chuck shown on the machine is not included in the scope of delivery! All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: as good as new (ex-display), WEILER COMMODOR 180 GSD / New Machine - Showroom Model - Unused IMMEDIATELY AVAILABLE FROM STOCK Njdpfx Agjxviiqe Newc - Showroom model / NEW - Unused - CE marking - 3-axis digital readout - Center height: 180 mm - Swing over bed: 380 mm - Swing over cross slide: 215 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Speed / gearbox: 25 - 2000 rpm - Automatic longitudinal / face feed - Threads: Metric / Inch / Diametral - Tailstock / Quill taper: MT 4 - Quill stroke: 150 mm - Coolant system - Multifix quick change toolpost with insert - 3-jaw chuck 200 mm - Work light - Chip guard wall - Documentation Dimensions: LxWxH 2.6 x 1.6 x 1.7 meters / Weight 2000 kg Subject to errors and input mistakes.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Nwodpfxjw U Ry Nj Ag Njc Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: good (used), WEILER COMMODOR L&Z Lathe from German Army (Bundeswehr) stock - Good, fully operational condition - Turning diameter: 180 mm - Turning length: 1000 mm - Bar passage: 56 mm - Speed range: 25 - 2000 rpm - Threads: Metric / Inch etc. - Automatic longitudinal & cross feeds - Tailstock MT 4 - 3-jaw chuck 250 mm - Electric chuck guard - Multifix base holder & inserts - Coolant system Njdpfx Aoykknfsg Njwc - Chip guard rear wall - Machine documentation Dimensions (LxWxH): 2.5 x 1.3 x 1.7 meters / Weight: 1500 kg Subject to errors and omissions

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: Maschinen-Nr. 438, turning diameter over cross slide: 280 mm, turning length: 1,000 mm, turning diameter: 280 mm, spindle bore: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, total height: 1,450 mm, total length: 2,550 mm, total width: 1,000 mm, overall weight: 1,900 kg, Equipment: documentation/manual, rotational speed infinitely variable, Offered is a Weile Commodor 230 AC lathe in good condition. Accessories: 2 live centers, a face driver, thread-cutting holder for dies and taps, quick-change unit for drill chuck and drills with 5 holders, various micrometers, 4-jaw Röhm chuck, 16 Multifix tool holders, 14 sets of soft jaws, various turning tools, various indexable inserts, 3-axis digital display. Drawer cabinet 1000x750x750 mm, with 6 drawers. Take the opportunity to view this machine under power on site and see its condition for yourself. Nedpfx Aeykaqpeg Nowc

Condition: used, Year of construction: 1999, saw blade diameter 275 mm capacity 90 degrees: round 80 mm Njdpol R Nnnofx Ag Nswc capacity 90 degrees: square 70 mm capacity 90 degrees: flat 100 x 60 mm capacity 45 degrees: round 70 mm capacity 45 degrees: square 60 mm capacity 60 degrees: flat 80 x 50 mm clamping range 110 mm turning speeds 45 / 90 U/min total power requirement 0,5 kW weight of the machine ca. 0,07 t dimensions of the machine ca. 900 x 700 x 1600 m Manual cold circular saw with: - Machine base - Support rail 1500mm

Condition: repair required (used), Year of construction: 1990, LZ-Lathe Fabr.WEILER Type : COMMODOR Year 1990 with 3 axes digital readout Heidenhain, Multifix holder B, steady rest, machine documentation Machine is defective ( clutch ) Center height: 214 mm turning diameter over face support : 200 mm Nwodpfxjq Hd Ips Ag Nec Center distance : 1000 mm spindle bore : 60 mm Spindle speeds : 45 - 2000 rpm Machine is sold at a fixed price.

Condition: good (used), L&Z spindle lathe WEILER COMMODOR B from educational institution -GS identification -3-axis digital readout "NEW" -Centre height: 180 mm -Centre distance: 1000 mm -Spindle bore: 56 mm -Spindle speeds: 15 - 2000 rpm -Automatic longitudinal & cross feeds -Thread cutting: metric / imperial / module / diametral pitch -Electric chuck guard -2 x emergency stop -Multifix with insert -Four-jaw chuck - Röhm -Chip guard rear panel -Coolant system -Very well-maintained original condition -Documentation Nwsdpfxoyf U E Dj Ag Noc Dimensions: LxWxH 2.3x1.2x1.7 m / Weight 1600 kg Errors and omissions excepted

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 Nwjdpfjuhbplsx Ag Nsc - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg].

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Nodpfx Ajvrcqdsg Nowc Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.