Used Wenzel Lh 54 for sale (44)

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm Rodpfot Hw S Iex Aazjn daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m 3-D-coordinate measuring machine with METROLOG II-Software

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Rsdpow H Auqjfx Aazjn

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, _____ Description: Year of manuf. : 2024 Control : Sonstige In General: Year of manufacture:2024 Traverse path X/Y/Z:800/ 1,500/700 mm Maximum table load:800 kg Rsdpexv Nkuofx Aazon Measuring accuracy:0.0005 mm Repeat accuracy:0.002 mm Touch probe:Renishaw PH 10M Plus

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 065014, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Measuring range X/Y/Z: 800 / 1000 / 700 mm Max. length measurement deviation: MPEe = 2.7 + L/300 µm Probe head: PH10M, Renishaw TP200 Accessories: HT400 control unit, reference sphere, 18-piece set of styli/extensions, rack for stylus change Software: Quartis R2025-2, including additional modules Quartis Surf and Curve for measuring surfaces and curves, without PC Last maintenance: 12/2021, acceptance report available in documents Very good condition, fully functional, documentation available Inspection at the facility is possible Rjdpex Au Hnsfx Aazon Sale without warranty, including transport packaging and loading, available from March 2026

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Software: CMM Manager Lite 2024 Year of construction: 2001 Rjdpsipq I Iefx Aazon Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 500 mm, input voltage: 220 V, year of last overhaul: 2018, Equipment: type plate available, CNC 3D Measuring Machine Model: WENZEL 6 10 5 CNC + MIH + TP20 + styli Rsdpsx Ebx Asfx Aazen ● Year: 2002 ● Measuring range: 600 x 1000 x 500 mm ● Full CNC control ● High-stability granite structure ● Air bearing guides ● Precise, rigid, and reliable machine Equipment included: ● Renishaw MIH manually indexable head ● Renishaw TP20 probe with modules ● Set of Renishaw styli ● CNC control unit ● Complete electrical cabinet ● PC + measuring software (if present → to be confirmed) ● Clamping plate / accessories ● Documentation Condition: ● Very clean, well-maintained machine ● Last calibration: 2018 ● Machine under power → demonstration possible ● Smooth axis movement, no abnormal play Transport: ● Dismantling and transport at buyer's expense

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 971696, Technical dataManufacturer: WenzelType: LH87 / CNCYear of construction: 1997Machine no. 971696Measuring rangeX-axis: 800mmY-axis: 1000mmZ-axis: 700mmTouch probePH10MTouch probeType: TP20Control panel: HT400Control: WPC 2010 The machine can be modernized with new accessories according to customer requirements.Price: on request!assembly and commissioning possible!we will be pleased to provide you with a detailed offer!note: our offer is directed exclusively at specialist customers!(subject to changes and errors in the technical data, specifications and prices as well as prior sale!) Rjdpfed Sv D Nex Aazen

Year of construction: 1995, condition: excellent (used), machine/vehicle number: LH951333, Technical data Manufacturer: Wenzel Type: LH86/CNC Built: 1995 Machine-No. LH951333 Measuring range X-axis: 800mm Y-axis: 1000mm Z-axis: 600mm Key system Keyboard PH10M Key system type: TP20 Key system # 438P68 Introuser panel: HT400RC V2 Wirlos Probe Head Controller: PHC 10 Control: WPC 2040 Calibration Ball: DIA 29,369 (Ideal for star buttons) The machine can be modernized with new accessories according to the customer's wishes. Price: On request! Rsdpfx Aod Hqyzsazen Set-up and commissioning possible! We are happy to provide you with a detailed offer! Note: Our offer is aimed exclusively at specialist customers! (Changes and errors in technical data, information And prices as well as interim sale reserved!)

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 Rsdpst Hw Nyofx Aazsn total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: ready for operation (used), Year of construction: 1999, Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Redpfx Aasw H Auwjzsn

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Rjdjw H Au Repfx Aazjn

Condition: ready for operation (used), Year of construction: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible. Rsdpfx Aju Ur Sqeazjn

Condition: ready for operation (used), Year of construction: 2006, Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible. Redpfxsu T Rhzj Aazen

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Rjdpfsw H Au Dex Aazjn

Condition: excellent (used), Year of construction: 1994, machine/vehicle number: LH 941148, measuring range: X 600 mm; Y 1.200 mm; Z 400 mm measuring uncertainty: MPEE 3,5 +L/300 μm; MPEP 3,5 μm temperature range: 18°C – 22°C temperature gradient: 1 K/h, 1 K/m, 2 K/d machine number: LH 941148 Redsklyunjpfx Aazen

Condition: good (used), Year of construction: 2007, Technical Data WENZEL LH 108 Year of Manufacture: 2007 Measuring Range X Axis: 1,000 mm Y Axis: 3,000 mm Z Axis: 800 mm Machine Type Bridge-type coordinate measuring machine Granite guides Air-bearing axes Measuring Accuracy Length measurement deviation approx. 1.3 µm + L/400 (depending on configuration and calibration status) Probe Systems Renishaw probe heads possible Rodpfxex N H U Hs Aazon Touch trigger and scanning PH10, TP20, SP25, SP80 depending on equipment Workpiece Weight Permissible table load up to approx. 2,000 kg (depending on configuration) Control CNC control with manual control unit Software Metrosoft CM Version 3.112 WENZEL Quartis R16 Electrical Supply 230 V, 50/60 Hz Power consumption approx. 1 kVA Pneumatic Supply Compressed air 6 to 10 bar, filtered and dry The machine can be tested under power. Dismantling will be carried out by Wenzel.

Condition: used, Year of construction: 2007, machine/vehicle number: 75388, Machine: Wenzel LH87 Serial number: 075388 Year of manufacture: 2007 X 800mm Y 1000mm Rodpjx Ey Daofx Aazen Z 700mm Measuring head: SP80

Condition: good (used), Year of construction: 2008, functionality: fully functional, total width: 1,700 mm, total length: 1,765 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, compressed air connection: 4 bar, Wenzel Smart Gear - gear and 3D coordinate measuring machine The machine is in very good condition and fully functional. It has been regularly serviced and well looked after. Machine data: • Machine dimensions L=1765mm W=1700mm H=2232mm • Max. rotary table workpiece diameter = 5 to 270mm • Measuring accuracy gear testing in accordance with VDI/VDE2612/2613 Group II • Max. rotary table load = 20 daN • Travel paths X= 500mm Y=450mm Z=400mm • Scanning probe - Renishaw SP600M • 7x SP600 change plate for probe included • Module measuring range 0.4 - 10mm • Active air damping of the machine • Year of manufacture 2008 • Accessories such as driver, reference ball etc. as shown • Jaw chuck D=80mm with inside and outside jaws • 24 inch monitor, mouse, keyboard The following software modules are included: Gear cutting software: • TMain - program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Calculated axis position determination • TGear – Spur gear measuring program • TGear – Head and root circle option • TWorm – Worm measuring program Rsdpfsvvudkox Aazon 3D software • Metrosoft CM 3.8

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 1,800 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 180 kg, We are selling a refurbished Wenzel WGT350 XL rack and pinion measuring machine. The machine can be used to measure gears and racks. - Max. Rotary table workpiece diameter = 5 to 400mm - Max. Rotary table load = 180kg - Travel X= 1800mm Y=200mm Z=650mm - Counterholder measuring range = 20 to 900mm - Module measuring range from 0.5mm - Max. Max. rack length = 1200mm - 6x probe changer incl. 6x SP600M plates - Temperature compensation of the machine - Active air damping of the machine - Year of manufacture 2006 - Accessories such as, driver, reference ball etc. as shown - Jaw chuck D=200mm with inside and outside jaws The following software modules are included: - TMain - program management - TStylus - Probe management - TCali - probe calibration - TAmo - Calculated axis position determination Rodpfx Aajvitkiozjn - TGear - Cylindrical gear measuring program - TShaft - Program for dimension, form, position and scanning of unknown contours - contours - TWorm - Worm measuring program - TRack - Rack software - TReverse - The parameters of an unknown gear, module (mn), helix angle (ß) and pressure angle (a), can be determined with TReverse. can be determined. - Statistical program, statistical evaluation for spur gear, bevel gear and worm gear testing. worm testing For further information, please contact us by e-mail.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, For sale: Used Wenzel WP-KL coordinate measuring machine, year of manufacture 2007, in excellent condition and immediately ready for operation. This machine is ideally suited for quality assurance, toolmaking, and precision metrology applications. General Condition The machine is in very good technical and optical condition, professionally overhauled and modernized in 2022. On-site inspection is possible by appointment. Technical Data - Model: Wenzel WP-KL - Year of manufacture: 2007 - Serial number: LH075440 - Machine height incl. extended damper: 3,485 mm (retracted: 3,470 mm) Rsdsx H Tqijpfx Aazen Measuring Range & Accuracy - Measuring range (X/Y/Z): 1200 × 2500 × 1000 mm - Accuracy (MPE E): 2.6 + (L/300) Equipment - CNC control: WPC, 3-axis - Probe system: Renishaw PH10M - Scanning probe: Renishaw SP25 with scanning kit 2 (probe stylus lengths 50–100 mm) - Probe changer rack: Renishaw FCR25 with 3 ports, empty PC System & Software - PC system with Windows 10 Professional - 2 × 24" TFT monitors - WM QUARTIS CNC geometry software – Version 2025 - WM QUARTIS CNC freeform surface applications – Version 2025 - WM QUARTIS CNC CAD import interface (STEP) – Version 2025 - USB user dongle with software license Accessories (included) - Small M3 stylus kit - Reference sphere - PC and controller trolley with integrated desk - Ergonomic hand control panel HT400 If interested or if you have any questions, feel free to contact us! Price: €85,000 net, negotiable for quick completion. All information provided to the best of our knowledge and belief. Subject to change, error, and prior sale.

Condition: used, Year of construction: 2015, WENZEL coordinate measuring machine (CMM) Travel distances: X2000, Y1200, Z1000 mm Redpfx Aajxu Nwlezsn Year of manufacture: 2015

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Additional Equipment Probes: 2 included This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Rsdpfox D Nrhex Aazen Application Types Measuring

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 013012 / 013013, Technical data Manufacturer: Wenzel Type: RS1625 plus (two-column) CNC Year of construction: 2001 Serial number: 013012 / 013013 Measuring range X = 6500 mm Y = 1600 mm / 1600 mm Z = 2500 mm Redpfx Aofluuwsazen Measuring plate 7200 mm x 3280 mm (divided into Y0) Measurement accuracy 40 µm + (L / 25 µm), but maximum 100 µm Accessories Software: Metrosoft CM SP2 Controller: 2 x Wenzel WPC 2030 / Renishaw PI200 Probe Interface Control panel: 2 x Wenzel HT400 (cable) / 2 x Key Sonic (wireless) / 2 x Monitor HP The machine can be upgraded with new software according to customer requirements. Price: on request! Installation and commissioning possible! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! (Changes and errors in the technical data, information and prices and subject to prior sale)

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 67301220, Technical dataManufacturer: WenzelType: RS1618 / CNCYear of construction: 1997Measuring plateX: 3000mmY: 1940mmZ: 290mmMeasuring rangeX-axis: 2500mmY-axis: 1600mmZ-axis: 1800mmTouch probe PH10MSteuerung: WPC 2010Optional accessoriesThe machine can be modernized with new accessories according to customer requirements.Price: on request!assembly and commissioning possible!we will be pleased to provide you with a detailed offer!note: our offer is exclusively aimed at professional customers!(changes and errors in the technical data, information and prices as well as subject to prior sale!) Rsdpfx Aasd Sv Elozjn

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 002689 / 002688, Technical data Manufacturer: Wenzel Type: RA1624 Triplex with underfloor Year of manufacture: 2000 Double pedestal CMM with additional underfloor measuring arm Serial number: 002689 / 002688 Measuring range X = 6500 mm Y = 1600 / 1600 mm Z = 2500 mm Touch probe Software: Metrosoft CM SP2 3 x Wenzel WPC 2010 Renishaw PHC10-2 Probe Head Controller 2 x Renishaw PHS heads with different probe lengths The machine can be modernized with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively at specialist customers. (Changes and errors in the technical data, information and prices as well as and prices as well as subject to prior sale). Rjdpfx Asgm Tyisazon