Press brake

Weinbrenner AP 270/3600

Condition: used, Technical details: bending angle max.: 0 - 225 ° working height: 850 mm operating voltage: 380 V bending angle max.: 0 - 225 ° number of bars max.: 15 mm diameter max.: 55 mm revolutions per minute: 5 -16 U/min total power requirement: 5,5 kW Weight approx.: 0,7 t dimension machine xH: 1,60 x 1,20 x 1,02 m Reinforcing Steel Bending Machine Perfekt 55 KA, PA, PLA — high-performance production machine. Hjdpfxox Adbne Airjw Thanks to the control system with four different bending speeds, the machine operates with exceptional efficiency. The bending angle is continuously adjustable from 0 to 225 degrees for left or right rotation. With its correction potentiometer for material spring-back compensation, the machine is ideal for medium and large-scale series production. Using the PA program control unit, up to eight different bending angles can be continuously pre-programmed from 0 to 225 degrees via rotary knobs. without accessories! *

Condition: used, Year of construction: 2015, x-travel 1140 mm y-travel 710 mm z-travel 610 mm CNC-control Heidenhain TNC640 table-size 1300 x 700 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min feed stepless max. 10.000 mm/min rapid traverse 24/24/24 m/min tool change unit 30 Pos. coolant IKZ 40 bar drive capacity - spindle motor 7,5 / 11 kW voltage 400 V total power requirement 25 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 3,25 x 3,08 x 3,00 m chip conveyor 4,30 x 0,80 x 1,60 m band filter unit 2,00 x 1,00 x 1,30 m Hjdexx A Ewopfx Airew coolant tank 1,30 x 1,00 x 0,60 m - Serial No.: 4P11152J1 - Machine ON: 23,320 h - Spindle ON: 5,042 h - Control: HEIDENHAIN TNC 640 - TSC 40 bar incl. 600 liter coolant tank with paper band filter unit - Y-Axis with 4 liear guide rails! - Chip conveyor - X- and Z-Axis with 6 roller supports for each axis!

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Hedpfjrb A Tcox Airsw Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking Hjdpfx Aorbz T Njirow - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: good (used), functionality: fully functional, empty load weight: 11,800 kg, maximum load weight: 25,500 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/1998, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 450 mm, suspension: air, tire size: 245.70 R 17.5, color: red, Year of construction: 1998, Equipment: ABS, sem bertoja extendable cradle, 3 axles with 2nd and 3rd steering, air suspension, abs, year 1998, 5.30m cradle with additional 3.50m extension, height from ground 45cm, extractable module above the axles, adjustable detachable neck, control wire for steering self-steering axles, good condition, INTERDRIVE SRL-PARMA DEALER Hsdpfowg E Rbex Airjw

Condition: used, TECHNICAL DETAILS - maxi bar diameter : 12.7 [mm] - main headstock strokes (fixed/rotary sleeve) : 130/80 [mm] - spindle power : 4 [kW] - rotation speed : 12 000 [rpm] - upper turret : 6 positions - lower turret : 6 positions - number of rotary positions on turret : 6 - sub-spindle maxi diameter : 12.7 [mm] - sub-spindle rotation speed : 12 000 [rpm] - dimensions : 2850 x 110 x 1480 [mm] - hours in production : 12408 [H] - spindle hours : 9400 [H] EQUIPMENT - CNC TRAUB TX 8i control - bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - brake on main spindle and sub-spindle - parts catcher with conveying strip Hsdpeuhav Dsfx Airsw - anti fire device - lubricating tank with pump with cooling unit - chip conveyor - various fixed and driven tool holders

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Hedpfjzc D Enex Airow Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. Hodjy Ty Ihopfx Airsw A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: new, fuel type: diesel, color: yellow, operation weight: 2,000 kg, chain condition: 100 %, emission class: euro5, Year of construction: 2026, Equipment: UVV, additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, NEW: Shantui SE20 Mini Excavator (2.0 t) Premium features at a great price – Now available for pre-order at Bagger2go! The brand-new Shantui SE20 is here! Compact, powerful, and equipped with high-quality features – ideal for gardening and landscaping, civil engineering, construction companies, and rental companies. Impressive technology: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Rotator: Original Danfoss – proven quality • Hydraulics: Hengli components – robust and efficient • Chassis: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access routes • Articulated boom: maximum flexibility even in confined spaces • Two speeds: precise maneuvering or fast routes • Hydraulic control: AUX 1 & AUX 2 digitally controlled – flow rate precisely adjustable • Control: Proportional joysticks with rocker switches – intuitive and precise operation Your advantages: Hsdpfx Aijwg Etijrsw • Secure your order now – special conditions for a limited time only • Lease-to-own available – we offer flexible financing solutions • Directly from Bagger2go GmbH – your partner for compact construction equipment

Condition: good (used), Year of construction: 2014, functionality: fully functional, HAAS VF-2SS | 4th axis | Through-spindle coolant | 2014 Vertical CNC Machining Center HAAS VF-2SS, manufactured in 2014. Hsdpfx Asz Dh Edeirow Machine equipped with a 4th axis and through-spindle coolant (TSC). Technical specifications: X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Max. table load: approx. 680 kg Spindle speed: 12,000 rpm Spindle taper: CT/BT 40* Spindle drive: direct drive Tool changer: 24+1 positions* Rapid traverse X/Y/Z: up to 35.6 m/min CNC control: HAAS Through-spindle coolant (TSC) 4th axis included Tool holders: not included Year of manufacture: 2014 Operating hours: not available Previous operation: 2–3 shifts Equipment: 4th axis Through-spindle coolant High-speed Super Speed (SS) version Automatic tool changer Coolant system Machine inspection can be arranged by prior agreement.