Optimizer

Weinig Dimter Opticut 350

Condition: excellent (used), Year of construction: 2009, CNC for complete processing of door frames / jambs , either or adjustable door frames in DIN norm Working width max 3.000 mm Working width min 480 mm Workpiece thickness max 98 mm Workpiece width max 280 mm Aggregates per side 2 Saw aggregates per side 1 diam. 400 mm Drilling supports per side 1 Drills per side 5 Aggregates longside 1 Milling aggregate with 2 spindles Aggregate tiltable in angle 45° Nksdew Sd Uuopfx Adwst Angle adjustment - programmable controller Width adjustment - programmable controller Conformity marking - CE mark Weight 2.500 kg

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW Nodpfx Asp T Twujdwokt main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: new, functionality: fully functional, Year of construction: 2025, color: black, overall weight: 1,600 kg, empty load weight: 1,600 kg, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer BLACK, Office Container | Living Container | Construction Container | Model BLACK | 240cm x 600cm | High-Quality and Flexible Solution Available products can be inspected and picked up directly from our warehouse. Our office and living containers provide an excellent solution for a wide range of applications. They stand out with outstanding quality, maximum flexibility, and short delivery times. Technical Details Nkedpfxsvv Nqxo Adwjt Dimensions: •⁠ ⁠Width: 240 cm •⁠ ⁠Length: 600 cm •⁠ ⁠Height: 250 cm Insulation •⁠ ⁠Ceiling/Walls: 50mm PUR (Polyurethane) •⁠ ⁠Optional: 100mm insulation available with PUR, PIR, or Rock Wool •⁠ ⁠Floor: 16mm fiber cement board + PVC covering High-quality workmanship ensures long-term durability. Equipment: •⁠ ⁠1x Room •⁠ ⁠1x External Door •⁠ ⁠2x Windows with Shutters •⁠ ⁠2x LED Interior Lights •⁠ ⁠2x Interior Power Outlets Colors: •⁠ ⁠Facade Color: RAL 7016 •⁠ ⁠Frame Color: RAL 7016 •⁠ ⁠Customization: Individual design adjustments possible according to customer preferences Stock & Delivery: •⁠ ⁠In Stock: Shipping on the same day •⁠ ⁠Out of Stock: Production time depending on the model, approximately 2 to 4 weeks •⁠ ⁠Worldwide Shipping: We offer professional shipping services to ensure fast and reliable delivery to any country. Custom Sizes: Products can be manufactured according to the customer’s specific requirements. Showroom Address: Im Mannenberg 9a, 53557 Bad Hönningen, Germany For further information or customized solutions, please feel free to contact us!

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: Nksdpfx Aeff Sbiedwot - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: ready for operation (used), Year of construction: 2003, A sawmill is for sale. The Linck line is equipped with new automation from the Finnish company OT-Laite, manufactured in 2016. The Linck line speed is 100-120 m/min. It is operated by a single operator. Linck EV45 infeed turning device Chipper canter 1 Linck VM 50 Chipper canter 2 Linck VM 50 Scaner before profiling Lisker Profiscan / Seecon / ProfiTC. automation is made 2016. Nksdpjxg Ubyefx Adwet There is a room with all the necessary sharpening equipment Profiler group 1 Linck VPF340 , for 2 + 2 side boards Linck side board saw/ circular saw. 4 spindle Mechanisation for the removal of side boards Profiler group 2 Linck VPF 340 , for 2 + 2 side boards Linck resaw, max. cutting height 285 mm Transport to timber sorting Capacity: 400 m³ of sawn timber in 8 hours. line is 500 v and including transformer

Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm Njdpfxoxgtdas Adwokt

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Nkjdoncft Uepfx Adwst

Condition: good (used), Bandsaw line for big logs 1. Log conveyor 2. Buffering log deck and one piece feeder 3. Log conveyor and centering infeed with turner 4. Söderhamn AKE 245A Twin reducer bandsaw (ARI 6 knife heads) Nksdeikvliopfx Adwot 5. Board separator with block turner 6. Side transfer of blocks 7. Block infeed 8. ARI BKR-600 9. ARI DS-75 multi rip saw 10. Edging line with ARI KT-52 Edger Price: 2 100 000 SEK, in existing condition on site. Line is complete but not all conveyor in bottom floor. Bruks 1503M chipper. No power on electric cabinets (no PLC software) Can be dismantled and loaded by UJ Trading AB Sawmill is located in Sweden.

Condition: new, Year of construction: 2024, ♻ The MONSTER is a hybrid machine with two shaft PRE- SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets, styroform, plastic, waste, scrap and electrical devices. ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) Nkjdehwwplepfx Adwst ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 2072 x 1070 mm ✔ Dimensions L/W/H: 3,73/1,78/2,67 m ✔ Weight: 4200 kg 2 years warranty or 2000 working hours

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) Nsdpfxswqda Ne Adwekt 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch