Cross cut line

Weinig Dimter Opticut S-50

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Width: approx. 300 mm Ffsdow Rpygepfx Ag Rot Height: approx. 280 mm Screw diameter: approx. 180 mm Motor: 1.1 kW

Condition: new, New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Feded Hp Efepfx Ag Rsft Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg.

Year of construction: 2020, condition: refurbished (used), LINCK CSM 120/6 5 STILLIG WARIABEL Ffsdpfx Asvtc D Tjg Rst GENERALLY OVERHAULD AFTER OVERHAUL MACHINE STILL 2+132 KW 6 MOVING SAWS HIGH PERFORMANCE MACHINE NEW FAULT UNDER POWER OPPORTUNITY MORE INFO, PICTURES BY E-MAIL..

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Ffsdeudxchepfx Ag Rot Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Working width 1350 mm Ffsdpfx Agsrmucxj Rst Number of sanding units 2 st. Workpiece thickness max. 160 mm sanding belt measurements 1370 x 2150 mm Feed motor 0,75 PS

Condition: used, Weinig Powermat 700 planer and moulder with CNC control for four-sided planing and profiling of wood. Available by arrangement from March 2026. Sale of this machine is subject to the sale of the briquetting press (Ref. No. 800055) or the entire planing unit (Ref. No. 100101). spindle: 6 spindle 1: Bottom / 7.5 kW / 6,000 rpm spindle 2: Right / 15 kW / 8,000 rpm spindle 3: Left / Common motor with #2 / 8,000 rpm spindle 4: Top / 11 kW / 8,000 rpm spindle 5: Top / 7.5 kW / 8,000 rpm spindle 6: Bottom / 7.5 kW / 8,000 rpm working width: 230 mm working height: 160 mm spindle diameter: 40 mm feed: 40 m/min / 5 kW Planer table length: 1.200 mm Fodpjxpuufsfx Ag Rjft Control: Memory Plus

Condition: excellent (used), Year of construction: 1994, FOUR-SIDED PLANER Ffodpfx Ajp R N Evjg Ret WEINIG Type: U 23 B.j 1994 Max working height: 180 mm Max working width: 230 mm 6 spindle

Condition: new, Year of construction: 2025, Martin T 54 jointer Only with a good surface planer can you create truly perfect foundations. The T54 was developed with precisely this objective in mind. It enables you to easily plane workpieces at the most modern level and to safely provide them with angular edges. The machine is equipped with a TERSA solid steel cutterhead as standard. The Xplane cutterhead, which operates with a drawing cut, is available as an optional extra. Planing bevels is effortless, as any angle between 90° and 45° can be quickly adjusted with the user-friendly one-hand adjustment. The solid cast iron tables of the T54 provide secure support even for large, heavy workpieces. If you need even more support, you can extend both the infeed and outfeed tables by 380 mm each - of course also in cast iron. Fjdpepq If Dsfx Ag Rjft Technical data table width: 500mm Table length: 2840mm Maximum chip removal: 8mm cutter: diameter 125mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Huyjm0s Motor power: 5,5kW Fence adjustable up to 45 Auxiliary ruler for small workpieces Table adjustment motorized Equipment: T 54 T 5462-a Suvamatic T5406/3-a solid steel cutterhead Xplane with 3 spiral knife rows (26 cambered carbide knives per row; 2 counter knives), delivery includes full knife equipment as well as a T-wrench Torx T20; shaft speed 6,000 rpm included. The emission sound pressure level LpA during machining is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Ffjdpfow Ucyujx Ag Rjt Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Options/Extras: Ffodpfjwyu Rwjx Ag Rot • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting