Longitudinal circular saw

Weinig Raimann FlexiRip „Jrionline“ 6200

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant Kdodpfx Aegr Er Seadsw - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: new, Year of construction: 2023, Due to a planning error, I am selling a new, originally packed cantilever discharge system for a Fröhling heating system for 6 m room size with 1 m auger extension with separate drive for screw and turntable as 2 motors, ideal for 2 boilers Kjdpfx Aasuq Iy Rodsdw Photo is from another system as mine is still packed

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW Kdodpfetynpxox Aadew - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2004, Multiblade saw Raimann ProfiRip KR 310 M with HOLTEC ES 121SHKA cross-cut saw and HurricAN extraction system Model: Raimann ProfiRip KR 310 M Year of manufacture: 2004 (refurbished in 2022) Multirip saw with 2 adjustable saw blades Technical details: - Track width: 340 mm - Total feed passage width: max. 950 mm (instead of 800 mm) - Cutting height with/without pressure plate: 115 mm / 130 mm - Workpiece length: minimum 450 mm - Maximum saw blade diameter: 380 mm - Minimum saw blade diameter: 250 mm - Saw blade bore: 80 mm - Saw spindle diameter: 65 mm - Saw spindle speed: 3,900 rpm - Main motor: 30 kW - Laser alignment lights: 3 units - Operating pressure: 6 bar Kdodpfxew S S A Tj Aadjw - Stepless feed speed: 8 - 48 m/min - Feed motor: 1.5 kW - Voltage: 400V / 50Hz

Condition: used, Year of construction: 2006, Manufacturer: Weinig Model: Unimat Super 4 Year of manufacture: 2006 Four side planer Manufacturer: WEINIG restored Model: UNIMAT SUPER 4 with mechanization of short workpieces EM15 - Year of manufacture: 2006 Technical specifications - Working width: max 150 mm - Working width: min 25 mm - Working height: max 50 mm - Working height: min 15 mm - Number of spindles: 3 - Power top spindle: 22 kW - Power bottom spindle: 11 kW - Spindle rotation speed: max 1/min 7.000 rpm - Spindle diamete: 40 mm - Table length: 2.000 mm - Feedrate max: 24 m/min - Continuously variable feed - Seperate motor per spindle - Roller infeed Cardanic drive Kedoqprk Tjpfx Aadjdw - Infeed from magazine - Motoric adjustment Planing height - Lubrication pump automatic - WEINIG Face-milling cutter - WEINIG EM 15 - Total connection: 45 kW

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 32 h, load capacity: 4,000 kg, lifting height: 6,000 mm, free lift: 1,715 mm, fuel type: electric, mast type: triplex, construction height: 2,730 mm, fork carriage width: 1,750 mm, fork length: 1,500 mm, empty load weight: 7,610 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,750 mm, Four-way Sideload Forklift Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Kdsdpewhtliefx Aadsw Technical condition: New Front tire type: Solid rubber Front tire size: 533x228mm Front tire condition: 80 - 100% Rear tire type: Super elastic Rear tire size: 710x318mm Rear tire condition: 80 - 100% Battery volt: 72V Battery Ah: 775Ah Battery manufacturer: GNB Industrial Power Battery year: 2025 Battery condition: New Description: + Transmission with high torque for 12% incline + Combi Connect Telematic (for remote access) Sideshifter, fork positioner, Fork positioner: closed width 450mm, max. open width 1750mm (from outside to outside of forks) 3rd valve, 4th valve, rear working lights, front working lights, heater, full cab, CE certificate, safety light, Warning light color: Combilift green/grey USB power supply, seat belt, windshield wiper, additional hydraulic control valve with 2 hoses ending at the fork carriage

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: Kjdpjq Auhdofx Aadsdw 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: used, Year of construction: 2008, Bioflamm SR-EB9 wood chip boiler, moving grate furnace, year of manufacture 2008, a new heat exchanger was installed in 2018, output 830 kW, hot water system max. temperature 120°C, incl. feed auger with backfire protection, incl. fuel chain conveyor, incl. 2 pcs push floor containers of 30m³ each, incl. automatic ash removal, incl. hydraulic unit, incl. control system, dismantling must be carried out by the buyer. Kdsdpfsvytfuox Aadow

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm Kdodpfjlu D Tfex Aadsw The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: good (used), Year of construction: 1991, max. planing width 520 mm max. planing height 200 mm 4 cutterblocks slotted table lips electr. height adjustment Kjdoiwi Ezepfx Aadjdw with trolley with knife setting gauge