Spindle

WEISS 174405B

Condition: ready for operation (used), travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, Equipment: chip conveyor, documentation/manual, 4-axis machining center, year 2016, control: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, 2-fold pallet changer, pallet size: 500 x 630 mm, 60-fold tool changer, HSK63 tool holder, IKZ, Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper belt conveyor, infrared measuring probe Nodpfx Aherx Sh As Rjkw

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Nsdpfx Aswbuyzsh Rokw

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair Nkedpfx Asvu E R Ssh Row of the milling drive is available on request. Including hydraulic steady rest.

Year of construction: 1990, operating hours: 16,400 h, condition: good (used), AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Nkedpenzhx Hsfx Ah Rjw Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: used, Year of construction: 2005, 1 used crankshaft milling device in very good condition for mounting e.g. on a lathe for milling crankshafts or other milling work Make: SEMA, Origin Austria Model: SE 100 Year of manufacture: 2005 Technical data: Spindle holder ISO 50, concentricity / test mandrel L=300 mm = 0.01 mm Speed range, infinitely variable, currently set to 2,000 rpm Spindle is designed for up to 3,000 rpm Drive power currently 15 kW The milling spindle is designed for up to 25 kW Bearing diameter 110 mm The 2 screwed-on adapter plates under the milling spindle are each screwed on. These plates can be used for your lathe, reworked or may have to be newly manufactured. Screw-on surface of the milling spindle: L x W: 490 x 250 mm Accessories / special features: Milling spindle: - The milling spindle is mounted on the face support of your lathe - Infinitely variable speed adjustment, LENZE frequency converter, designed for up to 30 KW Njdpfx Aeddziyjh Rekw - Clockwise / counter-clockwise rotation - Lifetime lubricated spindle bearings - Sturdy construction with hardened and ground spindle - High precision - Spindle with 2 bearings and 5 spindle bearings - Tool tightening via a threaded spindle - Mobile carriage with control panel - Emergency stop - Lockable main switch Drive gear for the main spindle: - A long drive rod is mounted in the spindle bore and connected to the gearbox - Infinitely variable speed adjustment, LENZE frequency converter - Clockwise / counterclockwise rotation - Jog mode Fast / slow The pictures show this unit mounted on a SARO SPA 10 x 3000 universal lathe for milling crankshafts. This lathe is not included in the scope of delivery! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Nkedpfx Ahjt Uuf Uo Rsw Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Year of construction: 1984, condition: good (used), functionality: fully functional, machine/vehicle number: 100752, Underfloor wheelset lathe type 106 Machine its good maintenenced Hydraulic copy lathe Nodpjttz D Tofx Ah Rokw

Condition: excellent (used), Year of construction: 2003, turning diameter over cross slide: 390 mm, turning length: 2,250 mm, turning diameter: 610 mm, spindle bore: 118 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 1,870 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 240 mm, Equipment: rotational speed infinitely variable, Siemens Sinumerik 840D control. CNC turning and milling center with main and counter spindle for efficient 4-axis complete machining of chuck, bar, or shaft parts. Nedsw Ngmhjpfx Ah Rskw

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t Nksdpfxovuk I No Ah Rew stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz a sister machine can be offered in as is where is condition, partially disassembled

Condition: good (used), Lot combined duoburners, gas and oil operated Fabr.: Steinmüller, Type 1: G-18-K 1120/800, Type 2: DAG-18-K 1120/800, Year of manufacture: 1996, burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1.500 Pa, exhaust gas temperature 424 degrees, (8 pieces), burner data for dual oil burners: calorific value 42MJ/kg, fuel oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner operating range 1:5, max. oil pressure at takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burner must be dismantled by customer. The burners can also be purchased separately. Nkodpfx Asd S R Injh Rew