Used Spindle for sale (12,424)

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm Lhjdpfx Ajtty Nkjkmjn -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: used, Year of construction: 1973, Used Machine Year of Manufacture: 1973 Features and Technical Specifications - Table milling machine for profiling, grooving, and rebating with appropriate milling tools Lhjdpfx Akszy Dzvemen - Three speed settings to accommodate different tools and machining operations - Spindle speeds: approx. 2,500 / 4,500 / 6,000 rpm - Milling arbor diameter: 30 mm - Height adjustment of the milling spindle: approx. 70 mm - Milling stop ruler with fine adjustment for tool diameters up to 250 mm - Weight: approx. 385 kg - Caution: The machine does not have a motor brake! - Availability: available shortly

Condition: used, Year of construction: 1963, Rigid milling machine Lhodpfxozk N Iij Akmjn Year of manufacture: 1963 Spindle diameter 30 mm Availability: at short notice Storage location: Röllbach

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Lhedpfx Akov Spvmsmsn Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG Gildemeister GMC20, manufactured in 2010 • Siemens 840D Powerline control system • Six spindles plus 6-2 backworking • All front spindles with X, Z, and W axes • Hainbuch SZ9012B2 collet chucks on the front, equipped with Hainbuch collets in sizes 6 mm, 10 mm, 12 mm, 14 mm, 16 mm, 20 mm, and 24 mm; bar feed accessories included • 9012 ETPU special collet chuck installed on the rear. Various sizes from 3 mm to 22 mm included Lheds Adp H Nspfx Akmen • HP cutting oil supply • Front tool stations with 30-degree taper on all six spindles. 25 holders included • 15 turning tool holders with 12x12 cross-section • 4 round tool holders with 16 mm diameter • Double “X” axis driven tool holder for use in position 5 • Single “X” axis driven tool holder for use in position 4 • Single “Z” axis driven tool for use in 6-2 backworking • Iemca SIR 25P bar feeder • Part ejector, collection device, conveyor belt, and collection container • Losma Filtermist • Kraft & Bauer fire extinguisher

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Ledpfozmukuox Akmohn

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm Lhjdpez Iz D Ijfx Akmen - guide tubes - chip flushing system - accessories: cams + gears - SEMA bar feeder bundle (1989)

Condition: used, total length: 1,700 mm, total width: 1,000 mm, total height: 2,100 mm, Year of manufacture: 2001 Colour: Grey - Details: - └ Description: Readout positioning does not work properly. Price AS-IS - Year: 2001 - CE marking present: Yes - Serial number: AB/143039 - Spindle diameter [mm]: 40 - Table length [mm]: 1195 - Table width [mm]: 350 - Feeding device present: Yes - Guide present: Yes Lhjdpjymlahjfx Akmen - Tool key included: Yes - Spindle speed: Manual - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 20 - Transport dimensions: 1700mm x 1000mm x 2100mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2007, operating hours: 60,000 h, functionality: fully functional, travel distance X-axis: 240 mm, travel distance Z-axis: 450 mm, chuck outer diameter: 381 mm, spindle speed (min.): 2,500 rpm, turning diameter: 580 mm, total length: 2,900 mm, total height: 2,770 mm, total width: 2,700 mm, turning length: 450 mm, turning height: 450 mm, overall weight: 13,000 kg, Equipment: documentation/manual, Used DOOSAN Mecatec V450TM twin-spindle CNC vertical turning centre, fitted with FANUC Series 18i-TB CNC control. The machine has been modified with two SAUTER VDI50 tool turrets, each offering 12 tool stations and driven-tool capability (24 tool positions in total). C-axis. Turret arrangement supports combined turning, drilling and milling operations. Lsdpfx Akoz Sx Nksmshn

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) Lhedpfez H Sbbex Akmon - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Ljdpfx Ajzuc T Tokmjhn Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: excellent (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, feed length X-axis: 535 mm, feed rate Z-axis: 3,845 m/min, turning diameter over cross slide: 630 mm, turning diameter: 950 mm, turning diameter over top slide: 630 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, total height: 1,850 mm, total width: 2,105 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Ljdpfxsz S Nc Uo Akmohn Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret 2 x Fixed Steadies

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Spare electro-spindles Spare B-axis motors Lhsdpoz Nlzzofx Akmen Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: good (used), Code: 0505 Brand: SCM Model: 150 - CE standard Lhodpfs Ad Nz Tox Akmen Automatic spindle moulder with tilting spindle, with numerical control programmer (3 controlled axis) for joinery, furniture, bespoke furnishings, wooden joinery, doors, panels, plastics, composite materials and various other applications – CE Standard Technical data: Electronic programmer with 3 controlled axis (spindle lifting – spindle tiltimg – spindle guide) allowing up to 98 programmes to be stored and executed automatically Spindle diameter mm 35 Spindle tilting -10° to +45° Spindle speed rpm 3000/4500/6000/7000/10000 Motor power Hp 7,5 Table length mm 2600 Max spindle projection mm 215 Work surface height from ground mm 920 N° 2 dust extraction inlets diameter mm 120 Equipped with Maggi 4-roller automatic feeder Maggi with variable speed control Overall dimensions mm 2600 x 1300 x 1800 h Weight kg 1400

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 51.10.318.12, functionality: fully functional, operating hours: 300 h, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 315 mm, cutting width (max.): 420 mm, control type: manual, roller diameter: 440 mm, pivoting range: 45 °, actuation type: electric, total height: 1,900 mm, total length: 780 mm, total width: 650 mm, overall weight: 140 kg, table height: 91 mm, year of last overhaul: 2012, saw band speed: 333 mm/s, Equipment: CE marking, documentation/manual, motor brake, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) Lhedpfx Aez Im Huskmsn - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, Lodoz R R Ttopfx Akmshn I am offering for sale a Felder F900Z Z under-spindle milling machine. The machine is in VERY GOOD condition – it has been used less than it has been standing idle. It is a robust machine, ideal for precise woodworking. Its condition can be seen in the photos; it is ready for immediate use and has no hidden defects.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Lsdpfx Ao Adlx Iekmjhn Storage location: Nattheim

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system Lhsdpfxez Df Txe Akmon - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: excellent (used), Catalog number 7882 TECHNICAL DATA - spindle diameter 30mm - spindle working height 200mm - interchangeable spindle - spindle locking - adjustable up/down - cast iron guide with full adjustment - 3 types of rotational speeds + right/left - table dimensions 1000x950mm - cast iron table - with side table 1100x330mm - clamping device - motor 3.7kW - brake - dust extraction nozzle diameter 120mm - dimensions (L/W/H) 1750x1400x1250mm - weight 683kg Lhjdpfx Akjztqupjmon ADVANTAGES – made in Germany – with side table – used milling machine – very good condition Net price: 7900 PLN Net price: 1837 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Lhjdpfx Akoz Hlplomen

Condition: excellent (used), Catalog number: 8097 TECHNICAL DATA - spindle diameter: 30mm - spindle working height: 170mm - spindle locking - adjustable spindle (up/down) - original cast iron guide - 5 types of rotational speeds: 3000, 4500, 6000, 8000, 10000 rpm - table dimensions: 730x1190mm - brake - motor: 5.5kW - dust extraction port diameter: 120mm - dimensions (L/W/H): 850x1200x1220mm - weight: 380kg Lsdpezzyrmofx Akmohn ADVANTAGES - Made in Italy - Brake - Unpainted - Used milling machine, very good condition - Designed for professional use Net price: 10900 PLN Net price: 2535 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2010, I sell the vertical wood shredder Comafer MAC 600S Year 2010 Cylinder system with knives sindle Motors 11KW Including full documentation and CE Condition like new. Avialable immediately. Lodjz Suz Njpfx Akmjhn

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Lhsdpovbcydefx Akmsn Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When adjusting the height, the correction factor for the swiveling angle is displayed in the upper display, which can then be set on the stop, thus allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort fence T226 with digital displays for total adjustment and infeed fence individually, as well as input of the cutter diameter, whereby the cutting depth is calculated automatically. Fence with lifting device, can be swung away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Foldable fence for edge milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table, left 500mm, right 500mm with two insert guide rails. 3-roller feed system HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed plug, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swung away for machine setup and then easily locked into place. Dust extraction port 2 x 120mm. Compressed air connection 6bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. Lhjdpfxszbm Tfo Akmjn CE marking. Dimensions approx. 3000 x 1500 x 1830mm (L x W x H). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this supplier".

Condition: good (used), Code: 0502 Brand: ZANGHERI E BOSCHETTI MASTERWOOD Lhjdo Aaykwspfx Akmen Model: FM 39S Multiple boring machine for furniture, carpentry kitchens, custom-made furniture, bathroom furniture, panels and various items Technical data: N° 39 spindles Max drilling centre distance mm 1216 Centre distance between the two spindles mm 32 Table dimensions mm 1425 x 780 Max vertical drilling depth mm 120 Threaded drill bit shank Motor power 4 Hp Quick adjustment of the heads for drilling at 0°-45°-90°, with the option to operate in all intermediate positions Millimetre-marked square guides N° 4 pneumatic clamps for securing workpieces Operating pressure 6-8 atm Overall dimensions mm 1590 x 1000 x 1200 h Weight kg 770