Carbide Chip Flute Grinding Machine

Wendt SS 50

Condition: ready for operation (used), Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible. Bsdpfx Abjykuucjxjww

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Bwjdpszg Iqnefx Abxsw

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Bedpfxjzhw Ryo Abxeww

Condition: used, Year of construction: 1988, Manufacturer: Haacke type: UW II A-CNC year of construction: 1988

 only for step drills up to max. Ø 30mm Bsdpfx Abog Tvmbsxeww cross adjustment: 250mm height adjustment: 250mm grinding length: 400mm weight: 1,4t footprint: 2,5 x 1,2 x 1,9mm Application: for grinding steps on step drills Accessories:

 Paper belt filter make LKK Foreground flap collet chuck Forkardt Overz /BR 50/ LH-Z 24394

Condition: new, functionality: fully functional, Topking X-25 CNC Cylindrical Grinding Machine Topking “The X-25 CNC cylindrical grinding machine is the perfect answer for UK manufacturers facing space constraints,” explains Simon Rood. “Unlike traditional T-type base designs, the X-Series utilises a revolutionary cross-slide structure. This design allows the X-25 to reduce floor space requirements by over 30% while significantly enhancing stability. It is a superior choice when space is limited, making it ideal for busy production environments where every square metre counts.” Machine overview INTRODUCTION Compact CNC cylindrical grinding machine with an impressive capacity. The X series CNC cylindrical grinding machine integrates advanced design and innovative features, offering efficient, precise, and flexible machining solutions. This grinder can meet various processing needs and ensure high-quality results for small or large components. The X-axis and Z-axis of the X-series CNC cylindrical grinding machine adopt a cross-slide design, effectively reducing the footprint and axial travel, thereby saving production space. The high-rigidity machine body and the heavy-duty spindle and tailstock significantly increase the component load capacity. Bjdpfx Aeubbqijbxeww The high rigidity machine body ensures stability during grinding, providing high-quality machining results. The operating system is equipped with a high-performance CNC control system and a built-in graphical user interface (GUI), making setup easy and enabling users to operate with ease. The grinding applications are extensive, offering customers the most suitable machining solutions. Specification Swing (Max) 270mm Distance between centres 200mm Grinding Diameter (Max) 250mm Weight between centres (Max) 5kg CNC Control System FANUC or Mitsubishi CNC Controls

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Bodjyudtpopfx Abxsww Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: as good as new (ex-display), Carbide milling cutter Bwedpfx Ajdwbklobxjw Manufacturer: Prototyp H 4 1200 17 -10 -2 10 x 22 / R 2 2 pieces available

Condition: good (used), Year of construction: 1999, machine/vehicle number: 490880699, ELB CNC-controlled profile grinding machine, type Perfect Future BD10 Unicon, 4 axes Used, well-maintained 4-axis CNC profile and surface grinding machine Bwodpjiwa S Tofx Abxjw Siemens control system Grinding length 1000 mm Grinding width 600 mm Grinding height 600 mm Grinding wheel dimensions 400 x 100 x 127 mm 4th axis Universal paper band filter system with permanent magnetic pre-filter Coolant unit Various grinding wheels

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, total height: 2,250 mm, total length: 2,000 mm, total width: 3,050 mm, grinding height: 300 mm, For sale is a CNC surface grinding machine of the brand Geibel + Hotz and type FS 415-Z SL Bedpsuy Tkzefx Abxeww The machine is ready for immediate use and fully functional Technical data Year of construction: 1999 Sanding range: 400*200*300 mm Operating voltage: 400/50 Hz/3 phases Control voltage: 2300/24 Volt Grinding spindle motor: 2 kW Table drive: electro-mechanical Cross-path drive: electro-mechanical Wheel bore: 51 mm Clamping width: min. 10/max. 30 mm Cone: larger D= 25 mm Mounting flange: Da= 108 mm Grinding wheel: 225*25*51 mm Clamping surface: 400*200 mm Dressing diamond: 0.75 carat Belt filter: Available Space requirement: 2000*3050*2250 mm On request, transportation and loading can be organized for an extra charge. Europe-wide can be organized. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2024, front tire size: 0%, rear tire size: 0%, We are selling a used Reform Metrac H 75 from year 2024 with approximately 830 operating hours and around 4,000 kilometers. Price does not include front mulcher, which can be purchased separately. Further details available upon request by email or phone. Storage location: 93095 Hagelstadt. Bjdoyq Axpspfx Abxsww