Used other metal grinding machines for sale (140)

Year of construction: 2011, condition: used, Grinding diameter: 600mm, grinding height: 400mm, max. table load: 500kg, length: 2540mm, width: 2130mm, height: 2350mm, weight: 5.2t, with manual, installation instructions and operating instructions, special face grinding program, 1x standard grinding wheel holder 25-100mm for wheel bore Ø127, tools (1x open-end wrench, 1x removal screw). An on-site inspection is possible. Ijdpfsz Da Nnex Ahnsig

Year of construction: 2004, condition: used, Weight: 4.7t, automatic system operating hours: 41,411h, feed operating hours: 14,251h, an on-site inspection is possible. Iijdpfxjz Da Nzs Ahnsg

Condition: used, Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment. Isdez A Ekbopfx Ahnoig

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control Ijdszvfpyjpfx Ahnjig We do not have any further technical data.

Year of construction: 2018, condition: used, overall weight: 10,000 kg, total length: 2,300 mm, total width: 6,500 mm, total height: 2,400 mm, BUDERUS CNC 235 – CNC Grinding and Machining Center Machining / Spindle 2 machining areas / channels Max. machining length: 150 mm Max. swing diameter: Ø 310 mm Workpiece spindle speed: 0–3,000 rpm Spindle bore: Ø 45 mm Workpiece spindle positioning via C-axis Table speed X/Z: 0–30 m/min Motor Spindle WMZ / DVS Type: GS 205-045/17 Year of manufacture: 2014 Automation Automatic workpiece feed / conveyor system Coolant / Filtration System LIQUI-Filter GmbH System: UR1060 / MW260 / Gamma 13 Tank capacity: 2,400 l Year of manufacture: 2015 Cooling System HYFRA gamma 13-F-S Cooling capacity: 13 kW at 32 °C Year of manufacture: 2015 Measuring Technology JENOPTIK post-process measuring technology Year of manufacture: 2018 Iodpszwa Rhofx Ahnoig Supply Data 3 × 400 V / 50 Hz Installed power: approx. 45 kW Compressed air requirement: 15 Nm³/h at 5 bar Control: Siemens SINUMERIK 840D Travel Z-axis: 300 - mm Workpiece diameter over bed max.: 150 mm Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 2300 x 6500 x 2400 mm Travel X-axis: 1240 - mm Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 256 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details. • Working capacity: • Maximum swing diameter: 280 mm • Distance between centres: 1,000 mm • Capacity with open steady rest: 70 mm • Capacity with closed steady rest: 70 mm • Minimum machinable diameter with a worn Ø250 mm grinding wheel: 0 mm (applicable at a workpiece swing diameter of 250 mm) • Workhead and tailstock: • Workhead swivel range: 90° • Workhead spindle taper: Morse 4 (ISO 296-91) • Tailstock quill taper: Morse 4 (ISO 296-91) • Tailstock quill stroke: 25 mm • Tailstock centre transverse adjustment (cylindricity correction): ±0.08 mm • Tailstock clamping force: 360 N • Grinding wheel head: • Swivel range: ±45° Iodpfx Ahjzwxmzsnoig • Total adjustment range: 270 mm • Rapid traverse travel: 0–270 mm • Rapid traverse speed: 2,000 mm/min • Infeed per handwheel revolution (relative to diameter): 0.1 mm • Minimum manual infeed (relative to diameter): 0.001 mm • Automatic working infeed range (relative to diameter): 0.001–270 mm • Grinding wheel: • Standard dimensions: Ø400 × 40 × Ø127 mm • Maximum wheel width: 40 mm • Axes: • X-axis travel: 256 mm

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK Ijdpfx Aszxg Tfohnoig • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door • Installed machine options/features: • Upper table • Glass scales • Reinforced A-axis, up to 750 rpm • Preparation for automatic calibration/probe • Grinding wheel measuring probe • Automatic fire suppression system with leak detection • TS-Remote Ready • Keyboard support • Oil leak sensor • Connection for external filtration system Additional equipment • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders • Flanges/adapters • Grinding wheel/electrode accessories • Automation/handling: • TOP loader • 12 pallets • Filtration/cooling/extraction: • Oil mist extraction system • Extraction silencer • Oil cooling unit • Filtration system with tank and pump • Workholding/tooling: • Collets 6–16 mm • Collets 16–32 mm • 351 ES collets: 6, 8, 10, 12, 16 mm • 4 x 351 ES collet sets • Collets: 6, 8, 10, 12, 14, 16, 18, 20, 25 mm • Automatic holder 6–16 mm • Automatic E386 holder, 16–27 mm • Manual hydraulic holder, diameter 32 mm • ISO 50 socket • ISO 50 arbor • 2 x 50 mm HSK electrode holders • 4 x 45 mm HSK grinding wheel holders • Grinding wheel holder for dressing • Grinding wheel set measuring adapter • HSK calibration disc • Calibration roller • Measuring: • Heliset Plus measuring device • Software/options/packages: • Tool Studio for PC • Tool Studio Step Tools • 45-degree P-System sharpening option • P36 wood drill tooling package • Drill package • Hoger P58 package • Consumables: • 4 x 208 l dielectric fluid

Condition: used, Year of construction: 2010, power: 6.5 kW (8.84 HP), Long-belt sanding machine suitable for sanding both large containers as well as standard sheets and smaller components. The machine can also be used as a standard-height machine! Iiedpfjywzvhox Ahneg

Year of construction: 1987, condition: used, A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible. Isdpfx Ahezxhk Eeneig

Year of construction: 2017, condition: ready for operation (used), A Schneeberger CNC 5-axis tool grinding machine is available. 1) Schneeberger Corvus GDS 650 turning machine, year of manufacture: 2017, grinding spindle interface: HSK80, grinding spindle power: 26kW/32kW, max. A-axis swing: 700mm, software: Quinto5.4.6, spindle hours: approx. 10400h. Including extensive accessories, Zeno precision 3D coordinate probe, quick clamping with tailstock, electrostatic extraction system, fire protection system, double grinding wheel capacity, integrated measurement and documentation. 2) Vomat FA 120EKSd filtration system, year of manufacture: 2016, filtration capacity: 120l/min, filling capacity: 500l, filtration fineness: 5µm, machine dimensions X/Y/Z: approx. 1600mm/1000mm/1200mm, weight: approx. 500kg. 3) Vomat HSSV3 filter module, year of manufacture: 2016, max. filling capacity: 350l, max. filtration capacity: 120l/min, operating pressure range: 6bar-10bar. 4) Hyfra Sigma 7-S cooling unit, year of manufacture: 2017, cooling capacity at 32°C: 6900W, max. operating pressure: 42bar, refrigerant quantity: 1.1kg, refrigerant: R410A, weight: approx. 170kg. Documentation available. An on-site inspection is possible. Iiodpfx Ahezhw Ryeneg

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Iiodpfxezg Iqnj Ahnog

Year of construction: 2008, condition: like new (used), functionality: fully functional, machine/vehicle number: 0710074, Coat grinder Ijdpfx Ahovxgbyoneig

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: 21i-TB, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, number of axes: 3, This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4" color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. - completely overhauled in 2026- Operating Hours: 0h after overhaul- Center Height: 175 mm- Center Distance: 1000 mm- Machine Base: Mineral cast Granitan S103- Strokes: 285 mm (X-axis) x 1150 mm (Z-axis)- X-axis Drive: AC Servomotor and ball screw, 0° angle, feed rate 0.001–5.000 mm/min- Z-axis Drive: AC Servomotor and ball screw, feed rate 0.001–10.000 mm/min- Measuring System: Incremental scale for X and Z axes, resolution 0.0001 mm- Grinding Headstock: Universal for external and internal grinding, Hirth serration 1° (-15° to +195°)- Motor Spindle (Pos. 2): 7.5 kW, 1400 to 3200 rpm, programmable cutting speed max. 50 m/s- External Grinding Guard: Wheel size D. 500x63mm F1 (80mm F5) with automatic contact protection- Internal Grinding Spindle (Pos. 3): Studer belt-driven internal grinding spindle (180°) with frequency inverter- Workhead Stock: Universal, roller bearing mounted, taper MK5, cylindrical outer nose D. 70mm, spindle bore D. 28mm, manual spindle lock- Workhead Drive: 1.8 kW AC Servomotor, speed range 1–1500 rpm, jog speed 1–50 rpm- Workpiece Weight: Max. 80 kg between centers- Tailstock: Taper MK4, 35 mm stroke, quill diameter 50 mm, hydraulic quill retraction with monitoring, manual fine adjustment +/- 0.04 mm- Pneumatic Lifters: Pneumatic lift-off for easy shifting of workhead and tailstock- Control System: Fanuc 21i-TB with 10.4" color touch screen, integrated PLC, 32KB user memory, 400 program storage slots- Power Supply: 400V +/- 10%, 50 Hz +/- 1Hz, 24V DC control voltage Optional Equipment: - Dittel Sensitron 6 contact detection with magnetic sensor (1 pc)- Movomatic C25 LP active probe- 3 pcs levelling elements- Air conditioning unit for electrical cabinet- Euchner hand-held control unit- Swiveling dresser for internal grinding- Park position for tailstock- 3 pcs Studer belt-driven internal grinding spindles (24,000 rpm / 40,000 rpm / 60,000 rpm)- Foot pedal for C-axis override with open doors- Foot pedal for clamping device actuation (tailstock)- Electrical interface for rotary dressing (spindle optional)- Movomatic in-process gauge control ES 124 control (measuring head optional)- 8 pcs used grinding wheel flanges for external grinding- Various new MK4 centers- Various dressers Additional Capabilities: Isdjzwd Hgopfx Ahnjig - Capable of thread and form grinding (software must be requested directly from Fritz Studer AG)

Year of construction: 2015, condition: ready for operation (used), A Costa Levigatrici wide belt sanding and deburring machine is available. Working width: 1350mm, sanding units: 2, abrasive belt dimensions X/Y: 1380mm/2620mm, working height: 920mm, contact roller width: 1350mm, contact roller diameter: 200mm, roller hardness 1/2: 35Shore/80Shore, max. abrasive belt speed: 18m/s, machine dimensions X/Y/Z: approx. 2050mm/1900mm/2350mm, weight: approx. 2800kg. Documentation available. An on-site inspection is possible. Iiodpszlkaisfx Ahnsg

Year of construction: 2017, condition: ready for operation (used), A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible. Iijdezkldtopfx Ahnsg

Year of construction: 1972, condition: ready for operation (used), A Voumard internal cylindrical grinding machine completely overhauled in 2020 is available. Grinding diameter range: 5mm-200mm, grinding depth: 250mm, speed: 1000rpm, speed control: continuously variable. An on-site inspection is possible. Iiodpfoy E S Hmox Ahneg

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated Iodpsyzn Dmsfx Ahnjig • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Year of construction: 2010, condition: ready for operation (used), A Costa Levigatrici wide belt grinding and deburring machine is available. Working width: 1150mm, abrasive belt dimensions X/Y: 1180mm/2200mm, max. speed: 18m/s, contact roller diameter: 200mm, pressure roller diameter: 55mm, max. workpiece thickness: 160mm. Machine dimensions X/Y/Z: approx. 1850mm/1950mm/2100mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Iiedpfxjzlkace Ahnjg

Year of construction: 2021, condition: ready for operation (used), A universal external and internal cylindrical grinding machine Tachella, refurbished in 2021, is available. Center distance: 600mm, center height: 120mm, max. grinding diameter: 240mm, max. grinding length: 600mm, X/Z travel: 600mm/250mm, max. workpiece weight: 100kg/40kg. Machine dimensions X/Y/Z: approx. 2700mm/1900mm/1700mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Iisdezhnuiopfx Ahnjg

Year of construction: 2009, condition: ready for operation (used), Distance between centers: 600mm, center height: 140mm, max. swing diameter: 275mm, max. workpiece weight overhung/between centers: 30kg/100kg, feed X/Z: 8m/min, workhead spindle taper: MK4, tailstock taper: MK4, tailstock quill travel: approx. 35mm, grinding wheel dimensions: 400mm/50mm/127mm, grinding spindle speed: 1425rpm, internal grinding spindle speed: 16800rpm, max. internal grinding wheel diameter: 100mm, filter volume: 300l, filter capacity: 100l/min, chuck diameter: 160mm, operating hours: approx. 350h. Including chuck, magnet and dressing device. Machine dimensions X/Y/Z: approx. 3000mm/2700mm/2050mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Iisdpozlt Ntsfx Ahneg

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 600 mm, number of axes: 5, This 5-axis Kapp RNS 55 was manufactured in 2005. It features multiple grinding spindles, including three with a diameter of 20 mm and seven with a diameter of 40 mm. The machine is CE marked. If you are looking to get high-quality grinding capabilities, consider the Kapp RNS 55 cylindrical grinding machine we have for sale. Contact us for further details. • Machine Type: Rotor Grinding Machine • CE Marked • Grinding Spindle Ø20: 3 pcs • Grinding Spindle Ø40: 7 pcs • V-Belts (Various Sizes): 55 pcs • Spindle Covers: 11 pcs • T-Slot Nuts: 7 pcs • Limit Probe Complete: 2 pcs • Hoffmann Mist Band Filter: 1 pc Ijdpszimrcsfx Ahnjig • Without Electrical Control Cabinet

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, type of input current: three-phase, rotational speed (max.): 10,000 rpm, shaft diameter: 12 mm, mount diameter: 10 mm, shaft length under head: 2,000 mm, space requirement height: 3,000 mm, 5 x Pferd Mammut – Electronic Suspension Motors: In stock at Kinket SSP B.V. These suspension motors offer an excellent solution for a variety of industrial applications, such as grinding, polishing, brushing, and milling. Features of 5 x Pferd Mammut – Electronic Suspension Motors: Infinitely Variable Speed Control: The Pferd suspension motors are equipped with infinitely variable speed control, from 100 to 10,000 rpm. This allows you to select the optimal speed that suits the specific tasks and materials you are working with. This gives you complete control over your machining processes. Complete Package for Immediate Use: At Kinket SSP, we supply the used suspension motors including the necessary sliding contacts and a 12-meter-long VAHLE contact rail. Versatile: Whether you work in metalworking, woodworking, plastics processing, or other industries, these flexible shaft suspension motors offer versatility and performance that meet your requirements. Their proven track record in various applications makes them a reliable choice for a wide range of machining needs. Quality: The 5 flexible shaft machines are in excellent condition. Each machine has been carefully inspected. Summary: 5 x PFERD flexible shaft machines Iijdpfstvfnuox Ahneg 5 x suspension brackets 5 x flexible shaft 12x2000mm 5 x straight handpiece 1 x 12-meter-long VAHLE contact rail These machines are fully comparable to the Suhner Rotomax suspension motors. Current new price approximately: €36,000 Selling price of this well-used set: €22,000 We also have several new and used flexible shaft machines available in stock (approximately 30 units) from the brands Suhner / Biax and Pferd. If you are interested in a mobile or stationary machine, that is also possible. In addition, we also have several used and new handpieces in stock. Belt sander / angled handpiece with collet or M14, etc. Please ask us about our current inventory.

Year of construction: 2003, condition: used, Max. grinding length: 2000mm, max. grinding width: 1000mm, max. working height with new grinding wheel: 600mm, max. workpiece weight: 3.2t, max. table load: 4.5t, clamping surface dimensions: 2860x1000mm, tool mounting: 4x grinding wheel mounts, spindle diameter at front bearing: 90mm, grinding wheel diameter: 500mm, max. grinding wheel width: 150mm, mounting diameter: 203.2mm, spindle speed: 1000-3000/min, cross travel: electromechanical, cross travel feed: 1-5000mm/min, max. cross travel: 1100mm, smallest programmable value cross axis: 0.001, vertical travel: electromechanical, vertical travel feed: 1-5000mm/min, max. vertical travel: 650mm, smallest programmable value vertical axis: 0.001, feed drive type: hydraulic, connected load: 125kVA, length: 10,284mm, width: 5137mm, height: 3925mm, weight: 22t, operating hours: 18,176h, with documentation. An on-site inspection is possible. Iiedpfxjzuzyxo Ahnog

Year of construction: 2010, condition: ready for operation (used), A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible. Iiodezf Nblopfx Ahnsg

Year of construction: 2017, condition: used, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system. Weight approx: 1700 kg Dimensions W x D x H: 1900 x 1200 x 2400 mm Cutting disc diameter: Max. 200 mm Drive power grinding motor: 4,0 kW Workpiece length without loader magazines: 3 - 450 mm Isdpfx Aev Uw U Nshnjig Workpiece diameter without loading magazine: 3 - 32 mm Workpiece length with loader magazine: 1-350 mm Workpiece diameter with loading magazine: from 3 - 20 mm