Steam boiler

Viessmann Vitomax 2000

Condition: like new (used), Manufacturer: Varian Type: NHS-35 Condition: The pump is in very good condition and can also be supplied with a corner valve if required. Codpfx Ashmba Aoh Asrf Warranty: 3 months Delivery time: In stock

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Csdev Hygfepfx Ah Aorf

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Credpfx Ahsgu U Ito Aef Used, untested robot. No technical documentation available. Not tested.

Condition: excellent (used), Standard boiler 30 t/h. Year of manufacture: 2012. Equipped with two oil burners. Crsdpfx Ahoxgn Its Aof

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Crsdjytpbijpfx Ah Aef Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate

Condition: used, Year of construction: 2012, machine/vehicle number: A0100-80069, functionality: fully functional, operating hours: 4,660 h, Equipment: documentation/manual, We are offering this used Hennecke ELASTOLINE F elastomer casting machine, year of manufacture 2012. The machine is in good used condition. If you have any questions or require further information, please write to us or give us a call. Csdpfx Ajx R Thcoh Aorf

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1,521 kW (2,067.98 HP), input voltage: 400 V, On offer: new Brand: Mtu Type: 12v 4000 gs l64 FNER Year of manufacture: 2025 Power: 1521 kW Voltage: 400V 50Hz Operating hours: 0 With manufacturer’s warranty Scope of delivery: gen set gas train ramp Codpfx Aey Hivueh Asrf MMC control panel

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design for optimized loading area length, approximately 3,700 mm long -Gooseneck with rear bevel approximately 1,000 mm x 10° Loading Platform: -Loading platform in extendable design, approximately 8,800 mm long, with bevel at the rear approximately 500 mm x 10° -Recess in the loading platform and into the bevel for accommodating the excavator arm -Pneumatic locking system with tapered locking pins and reinforced locking positions -Hardwood decking on the bevel of the loading platform Ramps: -1 pair of two-part steel ramps with a length of approximately 4,350 mm and a width of approximately 900 mm -Ramps with hardwood decking -Hydraulically folding ramp ends -Ramps can be individually hydraulically moved outwards by approximately 235 mm and inwards by approximately 215 mm -Square ladder strips 20 x 30 mm, approximately every 200 mm on the outer frame of the ramp Axles and Suspension: -BPW axles and suspension, 1st axle with steering knuckle, all other axles with hydromechanical forced steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -Tires 235/75 R 17.5, twin tires -TPMS tire monitoring system according to ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheel Included accessories: -Steel front wall, plug-in, approximately 400 mm high -3kW electro-hydraulic unit for controlling the hydraulic operations, with the exception of hydraulic winches -Parking position on the gooseneck for the warning signs when not in use -1 spare wheel -On the gooseneck, 1 pair of plug-in aluminum sideboards, approximately 400 mm high, anodized -On the gooseneck, 1 plug-in aluminum rear wall, approximately 400 mm high, anodized -Approximately 40 mm thick hardwood decking above the gooseneck, checkered plate decking above the kingpin -2" kingpin -Guide plate from the gooseneck for the fifth wheel plate, approximately 500 mm wide -4 chock blocks -Mechanical landing gear with 2-speed gearbox and crank -JOST Module B – static test load = 50,000 kg -1 intermediate table, approximately 300 mm wide Codpfx Ajk Aht Uoh Asrf -Extensions (galvanized), extendable by approximately 230 mm on each side -Wheel recesses with square ladder strips -Aluminum covers for the wheel recesses -1 pair of mechanical rear supports -Steering assistance at the front and rear, operable via cable remote control, with single-axle monitoring -1st axle with automatic lift axle function -Central lubrication system with 1 pump, brand BEKAMAX -Wireless remote control for operating the steering assistance, in addition to the cable remote control, with 2 indicator lights on the receiver for single-axle monitoring -Wabco Smart Board system -4 warning signs, approximately 423 x 423 mm, extendable by approximately 400 mm, incl. 2 position lights and mounts for rotating beacon

Condition: new, For sale: a stock of new engines, approximately 1,500,000 kg. Sale in batches. Minimum order quantity: 50,000 kg. All engines are either new or used, but refurbished. Approximately 3,000 units. Cedpfxezgu D Is Ah Aerf Various manufacturers: Siemens, ČKD, MEZ, etc. Price per 1 kg: 1.50 EUR.

Condition: good (used), Csepel radial drill Type: RF50/1600 Arm lenght: 1600 mm Max drilling capacity: 50 mm Max spindle speed: 2000 1/min Height of the machine: 2830 mm Machine lenght: 2190 mm Machine depth: 950 mm Weight: 3050 kg Under power in our warehouse. Crjdpfxjyubmts Ah Ajf