Angular Clamping Device

WMW AW1000x800x640

Condition: used, Year of construction: 1998, turning diameter 570 mm turning length 2000 mm control Kodpfx Aougawfodwewt total power requirement 15 kW weight of the machine ca. 3,5 t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm Kjdpfow Rl S Sex Adwswt T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Tool presetter EZSET EZ400 Kwedouhb Stepfx Adwst

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Kwjdpfx Adsphl Ecswjt Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Kedpfxsw Au H Rs Adwjwt Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, Kwedpfxjtv H Uco Adwjt • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Year of construction: 1990, condition: excellent (used), used T-slot clamping angle Technical data: Dimensions height 1120 mm width 320 mm Groove width 20 mm with - 7 horizontal T-slots Kodpfx Aegwxmxodwjwt used, in good condition

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) DECKEL MAHO - DMU80P Kwsdpfx Ajw Rdl Djdwot MACH-ID 9194 Make: DECKEL MAHO Type: DMU80P Control: HeidenHain TNC430 Year: 2000

Year of construction: 2005, condition: ready for operation (used), Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible. Kjdpfx Adsvamqdswjwt

Condition: used, Year of construction: 2008, Technical details: table diameter: 1000 mm table height: 75 mm max. table load: 250 kg weight of the machine approx.: 1128 kg dimensions: Aggregat: L: 1400 x B: 1000 x H: 160 mm 1-axis NC rotary table - horizontal Positioning and rotary machining mode; intermittent operation with 8 star-shaped T-slots according to DIN 650: a=18H7; h=31mm; b=31mm; c=13mm x length 380mm Finished surface Overall height 250mm Kodpfx Adsu N D A Towowt Turning: Rotation 360°, by means of incremental encoder, speed 2160°/min. Angular acceleration 120°/sec.²; positioning time 0.867 sec., speed max. 6 rpm, machining 1 rpm. Load on indexing plate axial max. 100kN, radial max. 115kN; Torques tangential 14,000 Nm as well as worm gear 7,000 Nm and circular machining 2,700 Nm Measuring system Heidenhain - RON 886 C type connections (2x G 1/4" and 2x G 1/8") *