Blade separators

Wolf Technik für Baumaschinen Terra-Star TSC.153.S304

Condition: used, Year of construction: 2003, Technical details: pressure: 40 t box opening: 1200 x 730 mm material: Pappe,Plaste - cardboard bottles voltage: 400 / 50 V / Hz total power requirement: 16,4 kW transport measurements machine: 6,5 x 6,2 x 2,7 m Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm * Nodju Nw Ezepfx Adwekt

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Nodpovwlqqofx Adwjkt Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2025, condition: new, machine/vehicle number: Neumaschine auf Bestellung, Description: - Screen deck system consisting of 1 deck for screening minerals from pre-crushed material Input grain size max.: 0-100 mm - Screen cut grain size 0-30 mm - Capacity approx. 60 m³/h (depending on material) - Material is separated into 2 fractions 0-30 mm and oversize grain - To be mounted on the customer's own impact walls or base frame Technical data:  Screen deck: length = 3,120 mm; width = 1,400 mm o External dimensions: length = 3,300 mm width = 2,050 mm o Screen area 4.6 m², number of shafts 24 pieces o Drive 2 x 4.0 kW geared motors Nkjdpfxjd Rbmks Adwst o Screen body polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) o External lubrication of the bearings, optional central lubrication possible for an extra charge  Color: black RAL 9017 / green RAL 6018 or according to customer specification ( against surcharge) Delivery time_ approx. 20 weeks

Year of construction: 2008, condition: used, Field of application: Freight transport Attachment suited for: Loading and unloading machines Please contact ATS Norway for more information Please provide reference number upon request: 20081 Nkjdpsw Ia Ngofx Adwjt Specifications: 2008 model Weight: 750 kg Hydraulic pump Length: 12 meters Ready for delivery Description:2008 Palfinger PK 14080 C crane with hydraulic pump.The crane was overhauled when the owner purchased it.Ready for delivery. Own weight: 750 Model: PK 14080 C kran m/ hydraulikk pumpe

Year of construction: 2003, operating hours: 43,000 h, condition: repair required (used), machine/vehicle number: HBC 140 2x75kW 2003 (W230-005), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2003 Hardox bottom floor plate only Plastic valve Anti-rat cabling Hours 43.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Njdokcgynspfx Adwekt Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Optional equipment: Flow divider on rear conveyor Nodpsxx R Rhsfx Adwskt Delivery date by arrangement

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Nkodpfx Adexl Rqbewjt Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Year of construction: 2019, condition: as good as new (ex-display), Aluminum flat conveyor including 4 suspension points Dim: 3000 + 520 x 105mm Nsdpod Ra Ttjfx Adwjkt Conveyor belt width 400mm PVC conveyor belt incl. Studs and wave edge * optional with magnetic deflection roller at the end of the conveyor belt. * optionally with substructure * Special designs in all versions possible.

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Nodpfx Asxrtt Eodwekt Interim sale, changes, and repairs reserved.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Nodpetvau Aefx Adwjkt Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.