Complete sawmill (stationary)

WRAVOR Banc scie horizontal OCCASION WRC 1250

Condition: ready for operation (used), fuel type: diesel, nominal power (apparent): 950 kVA, 1000 rpm ore originali serbatoio interno 500lt Nksdpfx Adewvbn Iswot pronto al lavoro

Condition: new, Year of construction: 2025, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ area to be heated: 1800 m² Nedpok Utrwefx Adwjkt heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm weight: 1575 kg

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Nsdjw Dp Ufopfx Adwokt Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: excellent (used), functionality: fully functional, axle configuration: 4x4, Year of construction: 2010, operating hours: 4,212 h, For sale freshly imported from Denmark Spindle mower for leveling football pitches or golf courses, The mower is characterized by the fact that it has a cabin and is a JOHN DEER with a YANMAR engine manufactured in Japan, it has 5 mechanisms for leveling grass 5x75cm in total 3.45m cutting width. Fully functional, regularly serviced comes from the first owner who worked with it on the golf course. Mileage approx.: 4200 mth Year of production: 2010 Everything is functional. Technical data: Yanmar engine Capacity 2.1cm3 Power: 31kW 4 cylinders diesel Cutting width: 3.45m Maximum speed: 15kmh Hydrostatic drive 4X4 - with the possibility of adjustment Has a cabin Equipment: Radio Heating Lights Turn signals Wipers Adjustable seat Traction control Control everything in the cabin == The John Deere 1905 series, five-unit reel mowers, have a total cutting width of 345 cm (136 in) with a working speed of up to 15 km (8 miles) per hour. Njdpfowc Rcbjx Adwjkt Designed primarily for use on golf courses and football pitches, this four-cylinder mower is equipped with a 51 HP (max) Yanmar diesel engine, hydrostatic transmission, Command Arm control and four-wheel drive. From the outset, the models have been equipped with 76 cm (30 in) wide ESP reels, which is particularly important for golf course managers, for whom top performance is of the utmost importance.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Nsdpsfg E Hpjfx Adwjkt Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 193 34-41, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,600 mm, table load: 2,500 kg, spindle diameter: 102 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 1,600 rpm, total height: 3,500 mm, total length: 6,500 mm, total width: 4,700 mm, table length: 1,400 mm, table width: 1,250 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, The machine was overhauled and modernized in 2025 and is immediately ready for operation! Travel paths: - Table cross travel (X-axis): 1600 mm - Spindle head vertical travel (Y-axis): 1250 mm - Table longitudinal travel (Z-axis): 1475 mm (restriction due to large table) - Quill travel (W-axis): 710 mm - Table rotation (B-axis): 360 degrees Clamping table: - Clamping surface: 1250 x 1400 mm - Table load capacity: 2.5 t Spindle: - Diameter: 102 mm - Tool holder: DIN2080, SK 50 - Infinitely variable speed: 4 – 1600 rpm - Drive power: 13 kW Feed: - X, Y, Z axes, stepless: 1 – 4000 mm/min Rapid traverse: - X, Y, Z axes: 4 m/min Power consumption: 42 kW Weight: 10 t Space requirements (L x W x H): 6.5 x 4.7 x 3.5 m Equipment: - Heidenhain TNC 320 Nedpfow Rn R Rjx Adwskt - Coolant device

Condition: good (used), Year of construction: 1998, Skid-mounted nailing machine P + K Nodpfx Adouzh Anjwokt Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding punch Positioning table Portal stacker Pallet size 600x800 - 1200x1400 mm

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Protec KT 2000 HV, Hydraulically height adjustable Load 2000 KG Manual remote control with digital display Double foot remote control Height approx. min. 800mm tilted to middle , height max. 1400mm Height min. horizontal 1000mm diameter faceplate 1200mm Tilt angle min. 135 Nkodpfxencfvhe Adwst Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Nsdpfx Adjv Umb Eowokt Viewings are available by appointment.

Condition: new, Wiedemann Entrindungsanlagen is a family-run company with decades of experience in wood debarking and log processing. Among other things, we also manufacture butt end reducers for large log diameters. For further information, please contact us by e-mail or telephone. Nodpfxstzfp Dj Adwskt