Sheet metal deburring machine

ZEGA ZGE60 Vibratory Sieving Machine

Condition: good (used), BSTA 30 / 600 spm Bruderer Feed BBV 120/60 Press force max. 300 KN Power consumption from 1.5 to max. 5.5 KW Technical Air 6-10 bar Operator’s instruction Bed opening 250 mm +/-20mm Stroke: 8-40 mm Strokes per minute.: Max. 600 spm variable from 100-600 spm With Automatic central lubrication Main shaft cooler Pneumatic clutch and pneumatic brake Three working mode Programmable speed and number of strokes, Reverse flywheel mode Feeding of strip from left to right or right to left Strip pushing or pulling Roll feed BRUDERER BBV Strip width ca. max. 190 mm Feeding pitch ca. max. 60 mm Strip max. thickness 3,5 mm Distance between columns 325 mm Table height from floor 1000 mm Table surface area 540 x 300 Hole in the table 315 x 110 mm Nwedpoda Ha Nofx Airsn Ram surface dia. 250 mm Weight ca. 3.000 kg Dimension ca. 1100 x 1.400 x 2.200 mm Feed pitch up to max. 60 mm adjustable, highly accurate(tol. 0.02 mm) Emergency stop and all other CE safety guards and relays Indexing per minute, infinitely variable Automatic in feed, fully synchronized with punching moment More high speed presses on stock made by Bruderer models BSTA 18, 20, 30, 200, 50 and Schaal and Mabu presses

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running Nodpfx Aerkmv Soirewn * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: used, Year of construction: 1996, diameter / mm workpiece length / mm length / mm MITUTOYO SURFTEST SV-500 Roughness tester with OLZE measuring plate Size: 600 x 600 x 80mm Target µm: 16 Actual µm: 10,00 Own weight: 85kg Nedotvm Smjpfx Airswn Information on the scope of delivery The package contains only the ordered product. Additional decorative items or other items shown in the product images are not included in the delivery.

Condition: reconditioned (used), functionality: fully functional, ram adjustment: 40 mm, installation height: 2,500 mm, pressing force: 30 t, stroke length: 40 mm, High Speed Automatic Punching Press. Machine with CE certificate and EUR1 certificate of European origin. Equipped with twin synchronized double rolls feeds for strips widths from 5 mm – 150 mm. PLC touch screen logical interface control. Numerically controlled stamping process (NC). With stroke and speed counter, programmable length, auto stop. Three working modes: Manual, One stroke and Automatic. Pneumatic clutch and brake. Operator’s instruction manual in English. Stroke power: 300 [KN] (30 [tons]). Adjustable stroke: 8-40 [mm]. Table: 540 x 300 [mm]. Adjustable speed 100 – 600 strokes per minute up to 10 in one second. Maximum strip thickness 2.5 [mm]. Central lubrication. Power consumption 5.5 [kW] Technical Air 5-10 [bar]. Nwjdpfxjvkfmrs Airjn Warranty: 1 year. Two feeders are used when you need to stamp very thin, soft strip or very heavy strip, to secure precise feeding. All specifications non-binding , subject to change without notice.

Condition: good (used), pressing force: 50 t, stroke length: 320 mm, Capacity 50 Ton Throat 225 mm Adjustable stroke 8 - 100 mm Number of strokes 320 p/min Nwjdett A T Tepfx Airjn Ram size 300 x 280 mm Table size 500 x 800 mm Machine LxWxH: 160 x 120 x 260 cm Machine weight: 6 Ton

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, overall weight: 500 kg, power: 0.5 kW (0.68 HP), stainless steel Linear vibration conveyors, sorter Manufacturer: Metaltec Maxthronac 600 VX01 Nedpjit Nkpefx Airswn Year of construction: 2020 Power: 0.5KW Weight: 300kg Mesh permeability: 7 mm Size: 500*1200*220mm Choice for two factions.

Year of construction: 2008, condition: ready for operation (used), Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible. Nwedpfxjyi E Eio Airjn

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min Nwodpfxozrpp Ns Airen distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 2000, machine/vehicle number: 309661, functionality: fully functional, operating hours: 6,750 h, Offered for sale is an eccentric press Nwodpfx Aisxvqmkjrjn Manufacturer: SCHULER / Römer GmbH Type: PN 63-250 Rated force: 630 kN Ram stroke: 8–100 mm Stroke rate: 140 strokes/min Two-hand and foot operation Separate control cabinet Used, fully functional condition. Collection by the buyer; assistance with dismantling/transport can be arranged if required. If interested or if you have any questions, please feel free to send me a message. On-site inspection by appointment is possible. Further metalworking machinery such as bench drilling machines, press brakes, pillar drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only – dismantling and transport by the buyer or by arrangement. If you are interested or have questions, feel free to send me a message. Further photos and technical details available on request. All information subject to change and without guarantee. Errors and prior sale reserved. Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp We handle all customs and registration matters for a fee. We can deliver vehicles to the port for an additional charge.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, coldforming machine for straightening-cutting-heading and grinding of the point suitable for the production of battery-pins wire diameter range: 0,2 - 2,5 mm lenght of the pins: 2,5 - 50 mm Nwjdpfxszdr Nce Airsn output: max. 600/min. weight: 1.300 Kg,