Coolant Treatment System

Zyklomat ZKR 14/350

Condition: used, Year of construction: 2016, Coolant cleaning system Manufacturer: Zyklomat Type: ZKR 14/350 Year of manufacture: 2016 For cleaning grinding emulsions Supply rate: max. approx. 250 L/min. at approx. 3.5 bar water pressure Overflow to the filter system is provided on site, air- and foam-free. Maximum temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to dirty tank: 100-350 L/min. Machine supply: max. 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Particle separation limit: approx. 5 µm Medium: Emulsion 3-6% Operating temperature: Ambient temperature Solid particle volume: approx. 5.14 m3 Operating volume max.: approx. 4.58 m3 Operating volume min.: approx. 3.60 m3 Process flow: fully automatic full-flow filtration Prjdpozwccmsfx Airjc Sludge discharge: fully automatic, with consistent solid content The dirty liquid is fed via on-site pumping stations. The chips and fine sludge generated during grinding (grinding debris, scale, corundum) are discharged via a scraper conveyor. The sludge is pre-dried in the upper section of the scraper. Filtration takes place via ZYKLOMAT high-performance hydrocyclones. The system operates fully automatically. Maintenance: annual maintenance Availability: 10-2026 Double scraper tank for discharging grinding sludge Type: KR 1.75-5.1 Total volume: approx. 5.14 m3 Maximum volume: approx. 4.58 m3 Length: approx. 4,000 mm, including 70 mm stiffening Width: approx. 1,890 mm, including 140 mm stiffening Height: approx. 1,105 mm, including 100 mm base profile Neck height: approx. 2,300 mm Theoretical maximum discharge volume: 15 kg/h Function: Coolant tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge. 1 bevel gear motor Voltage 400 V, 50 Hz, IP 54 as scraper drive 3 connection nozzles for return lines from three machines 1 clean liquid tank, integrated at the rear into the scraper tank. Oil-tight welded, with internal circumferential bevel gear, various cover plates (non-walkable plates screwed onto an angle frame), without ladder, without railing, without internal access rungs Maximum volume: approx. 0.55 m3 191026ä

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 250 kg, load capacity: 25 kg, controller manufacturer: Yaskawa, controller model: YRC1000, teach pendant manufacturer: Yaskawa, Equipment: documentation/manual, Industrial robot YASKAWA GP 25 Control unit YRC 1000 This robot was only used as a demonstration robot. Only about 600 operating hours. Ready for collection. Podpfjxb T Sysx Airorc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, number of chambers: 1, actuation type: electric, Equipment: CE marking, documentation/manual, In-stock item, available for immediate delivery -Tmax 1350°C -Usable space LxWxH (mm) 600 x 500 x 500 -Batch weight 300 kg -Normal operating pressure 10⁻³ mbar -max. cooling gas pressure 6 bar abs. -External dimensions LxWxH (mm) 4200 x 2500 x 3500 -Space requirement LxWxH (mm) 5000 x 5000 x 4000 -Weight (net) 13000 kg -Total connected load 125 kVA -Connection voltage 400 V -Current fuse 250 A -Control system: Stange SE 607 -Documentation Included: -Protective gas buffer tank -Vacuum pump stand -4-flap design for cooling, allowing the flow direction of the gas flow to be adjusted horizontally or vertically. -Option for liquid nitrogen connection, enabling cooling to -80 °C inside the furnace. -Internal insulation made of graphite hard felt, protected and reinforced with CFC. You can find the detailed description as a PDF in the advertisement! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Podpfx Aozr U Anoirorc Industrial furnace, vacuum furnace, vacuum furnaces, vacuum hardening furnace, hardening furnaces, sintering furnace, sintering furnaces.

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot-controlled polishing machine RPM500_OSZ2 with oscillation (50 mm) and feed (100 mm) Polishing disc diameter – 1000 mm Pedpfxod Dt D Io Airerc Drive power – 4 kW Dust extraction nozzle diameter – 100 mm Two units are available.

Condition: new, Year of construction: 2021, Laser power: 6000W/12000W/20000W Applicable Material: metal Prsdpfx Aijg A N Scoroc Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Weight (KG): 11000KG Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Flagship Series Super dynamic responding, easily handle complex patterns of sheets. 2. Automatic Edge-finding With the capability of identifying irregular sheets, the edge searching time is decreased to 3 seconds. 3. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Aanvullende opties & accessoires: Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Gewicht & afmetingen: Prodpfx Aoy Dg Eueiroc 400x500x300 cm +/- 5.000 kg

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Prsdpfey Anuhox Airjc

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Podpfx Ajz S S Elsirjrc Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 Prjdpfozkbr Tjx Airoc 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Prsdpfx Ajzg Iqneirec