Gearbox

4 Stück Bonfiglioli Getriebe JB00001227

Condition: new, Year of construction: 2016, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm Todpfxegwlrdj Af Asc !! The gearbox does not have an oil cooler !!

Condition: new, Year of construction: 2023, overall weight: 22,500 kg, For sale: 26 Siemens motors, new, from 2023. I will sell the entire lot or individual units. IE3 class. Tsdsv Iymuopfx Af Ajc 1 pc. 894718.2 IE3 Motor, 3-phase, 55kW, 4-pole, 400|460V, 50|60Hz, Siemens, 1PC3105-2CB20-0FA0, 04/2023, on EPAL pallet, wrapped in foil. 1 pcs. 894721.1 IE3 Motor, 3-phase, 75kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB03-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 4 pcs. 894726.1 IE3 Motor, 3-phase, 132kW, 4-pole, 400|690V, 50Hz, Siemens, 1PC3005-3AB20-0CA0, 06 & 07/2023, on EPAL pallet, wrapped in foil. 2 pcs. 894727.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.1 IE3 Motor, 3-phase, 200kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894729.3 IE3 Motor, 3-phase, 250kW, 4-pole, 400|460V, 50Hz/60Hz, Siemens, 1PC4105-3AB03-4FA1, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894907.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 894907.11000 IE3 Motor, 3-phase, 160kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. 3 pcs. 895025.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 2 pcs. 895025.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11500 IE3 Motor, 3-phase, 110kW, 4-pole, 575V, 60Hz, Siemens, 1PC3105-3AB00-0CA1, 05/2023, on EPAL pallet, wrapped in foil. 1 pc. 895136.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895631.00020 IE3 Motor, 3-phase, 132kW, 2-pole, 660V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894719.11080 IE3 Motor, 3-phase, 75kW, 2-pole, 400V, 50Hz, Siemens, 6SL3203-0CE21-8AA0, 03/2023.

Condition: refurbished (used), RA250D oxygen version, oil-free, assembled and filled with Fomblin. Tedpsd R Trnofx Af Ajc Completely overhauled, 0.5 mbar, 250 m³/h, available from stock. We currently have several oxygen vacuum pumps in stock.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Tsdpfxsua Tbws Af Ajc Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. Todpfewittpex Af Asc We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: used, x x x dismantled x +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Todpfxeip Rdls Af Aec Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, SIMOTICS SD MOTOR TYPE: 1CV3282C Low-voltage motor, IEC squirrel-cage rotor, self-cooled, IP55, thermal class 155(F) downrated to 130(B), gray cast iron housing, Basic line, Premium Efficiency IE3, 60Hz, P60: IE2, 6-pole * Frame size 280M * 55kW (50Hz) 66kW (60Hz) 3 AC 50Hz 400VD/690VY * 3 AC 60Hz 460VD IM B3, 3 PTC thermistors for shutdown (2 terminals), connection box on top. Tsdpfxegpgymo Af Ajc

Condition: excellent (used), loading space volume: 54 m³, Year of construction: 2002, Hüffermann LL101s/Roll-off Container 54 cbm/5 UNITS AVAILABLE • Manufacturer: Hüffermann • Model: LL101s • Year of manufacture: 2002 Tedpfxjwaap Eo Af Aoc • Unladen weight: 3,900 kg • Permissible total weight: 15,000 kg • Nominal capacity: 54 cbm • Internal dimensions: 7.4 m x 2.42 m x 2.95 m • External dimensions: 7.52 m x 2.55 m x 3.185 m • Floor: 3 mm S235 steel sheet • Sides: 3 mm S235 steel sheet • Rear side: 3 mm S235 steel sheet • Doors: twin-leaf • External colour: RAL 1226

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Todpfxorvg N Do Af Aec Also available sprocket 48B3 17 Z and 48B3 35 Z

Condition: like new (used), Multi-stage, submersible, self-priming centrifugal pump Type: MTR 20-19/6 A-W-A-HQQV Product No.: A45937986 Dimensions: L 150 cm, W 30 cm, H 30 cm // approx. 102 kg Tjdpfx Asfz D Dnef Aoc