Used horizontal band saws - manual - cutting range 221-299mm for sale (85)

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m Dedpehpktvsfx Aizecp The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: new, Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant system for all kind of metals, steels and Nirosta, quick clamping vice automatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability. CE conform Motor: 400V,50Hz Reduce gear rate: 25:1 Wheel diameter: 380mm Blade size: 3160x27x0.9mm Dcsdevrv Dqspfx Aizep Blade speed: 34 or 68 m/min Cutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°R Coolant pump: 400V, 50Hz, 3~, 25W Packing size: 1770x765x1120mm Weight: 365 kg

Condition: new, Machine in stock and immediately available Horizontal bandsaw S 225 G Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Dcjdpfsd R Sklsx Aizep Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Motor power: 1.5 kW Voltage: 400 V Features: - Saw arm can be swiveled up to 60° - With 2 saw band speeds for optimal adjustment to the workpiece - Ideal for cutting pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Generously sized saw arm for vibration-free operation - Lowering of the saw arm via a hydraulic lowering cylinder - Low noise due to robust design - Automatic shutdown after the end of the cut via a micro-limit switch - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery - Bi-metal saw band 2480 x 27 x 0.9 mm, 6/10 teeth per inch - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Pressure gauge for band tension - Vise with quick-release - Integrated coolant system - Hydraulic arm lowering - Motor protection switch - Automatic end-of-cut shutdown - Base frame While stocks last.

Condition: new, cutting diameter 280 mm saw band length 3370 mm cutting width 350 mm dimensions of saw-band 3370 x 27 x 0,9 mm 280 mm 250 mm 350 x 200 mm 240 mm 220 mm 230 x 220 mm 170 mm 150 mm 170 x 100 mm saw tape speed 37 + 74 m/min total power requirement 1,8 kW Djdpeivuqtefx Aizjcp weight of the machine ca. 0,6 t dimensions of the machine ca. 1,5 x 1,7 x 2,0 m

Condition: new, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Dedsd Du T Ispfx Aizecp Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds, 400 V: 45 / 90 m/min Coolant pump, S1 100%: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 190 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for belt tension • Vise with quick-release mechanism • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm 200 x 210 mm Dsdpfx Aishhzl Hszocp 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.

Condition: new, Model Name Dcedjgvkchopfx Aizjp Shark 281 CCS

Condition: new, Manual metal band saw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as bevel cuts, from left to 45° and from right to 30°. (Swivel range: 45° left and 60° right). Standard equipment: - Large, rotatable support table – wear-free! (The saw band cutting channel rotates with the bevel) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via a short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual shifting of the clamping jaw R/L - Electrical band tension monitoring with saw band break control - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw band M 42 - Chip brush Technical data ● Cutting range: round flat square 90° round 278 mm / flat 340 x 275 mm / square 275 mm 45° R round 260 mm / flat 320 x 255 mm / square 230 mm 30° R round 155 mm / flat 145 x 115 mm / square 115 mm 45° L round 205 mm / flat 275 x 180 mm / square 180 mm ● Drive power: 1.5 KW // 400V // 50 Hz ● Band speed: 20-120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg Dcjdjd Dpz Aopfx Aizsp Price on request.

Condition: used, Year of construction: 1970, cutting diameter 250 mm saw band length 3660 mm cutting width 1,3 mm clamping range Länge 450 mm clamping range Höhe 250 mm cutting speed 20 - 70 m/min cutting capacity stufenlos mitter cutting - all-position 45 ° voltage 380 V frequency 50 Hz power capacity 0,55 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,0 x 1,6 m coolant device Dodpfx Aijxc Nwuezjcp

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2.725 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,4 t Dodpfx Aisfgyh Hszecp The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.