Used injection molding machines with a clamping force of 1000 - 4999 kN for sale (497)

Condition: excellent (used), Year of construction: 2008, operating hours: 59,934 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 45 mm, displacement volume: 318 cm³, injection pressure: 1.525 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,860 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 7,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, warehouse no.: 503240 manufacturer: ENGEL type: Victory 650-120 tech controller: EC200 A02 year of construction: 2008 operation hours: 59934 h clamping force: 1200 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 507 mm Hedpjxwvdkjfx Ah Dofr screw diameter: 45 mm swept volume: 318 ccm injection pressure: 1525 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 8x measures of machine l x w x h: 4.86m x 1.5m x 2.1m total weight: 7600KG

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Hodpsv D Nxlefx Ah Djfr Videos of the machine are available Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: used, Year of construction: 2011, Serial no. 177368 / 181134, year 2012, control unit by Engel, type CC200, clamping force 1,100 t, tie-bar spacing 1,900 x 1,460 mm, screw diameter 105 mm, max. shot weight 4,160 g, handling system by Engel, type Viper60, hydraulic mould clamping, tool changer by Stäubli, powered roller conveyor, platform system, mould preheating station +++ Attention: Machine is part of an online auction! +++ Hfjdpfx Ajxug Twjh Dsr

Condition: excellent (used), Year of construction: 2005, Arburg 720 S 3200-2100 Injection Moulding Machine Year of manufacture: 2005 Machine in very good technical condition, fully operational, ready for immediate use in an industrial facility. Clamping force factory increased by Arburg to 3600 kN. Clamping unit Clamping force: 3600 kN Platen dimensions (H × W): 1040 × 1040 mm Tie bar spacing (H × W): 720 × 720 mm Minimum / maximum mould height: 300 mm Maximum opening stroke: 1400 mm Injection unit Screw diameter: 70 mm Injection volume: 1078 cm³ Shot weight: 984 g Injection pressure: 2000 bar Hodpexyq H Eefx Ah Defr Electrical-hydraulic equipment Pump motor rated power: 55 kW Heater power: 30.3 kW Dimensions & weight Net weight with control cabinet: 17 t

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: X 44733, Plastic injection moulding machine | Stork S+ 4400-2150 - Clamping force: 4400 kN - Opening stroke: 720 mm Hedpfxexwva Ej Ah Dsfr - Tie bar distance: 730 x 730 mm - Mould height: 500–1050 mm - Screw diameter: 62 mm - Shot volume: 951 cm³ - E-Screwdrive An inspection can be arranged at any time by appointment.

Condition: used, Year of construction: 2005, functionality: fully functional, clamping force: 2,000 kN, Details on request. Hfodpfx Ahexz D Ixe Der

Condition: excellent (used), Year of construction: 2007, operating hours: 25,215 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, ejector force: 22,000 N, ejector stroke: 150 mm, plate length: 845 mm, plate width: 820 mm, installation height: 2,100 mm, total length: 5,100 mm, total width: 1,600 mm, total height: 2,100 mm, overall weight: 6,600 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 950 mm, Equipment: documentation/manual, warehouse no.: 503472 manufacturer: KRAUSS MAFFEI type: KM 160-750 CX controller: MC5 year of construction: 2007 operation hours: 25215 h clamping force: 1600 kN distance between tie-bars h x v: 520 x 520 mm size of mould plates h x v: 820 x 845 mm min. mould height: 300 mm max. open daylight: 950 mm opening stroke: 650 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine with material hopper Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit mould heating 6x measures of machine l x w x h: 5.1m x 1.6m x 2.1m total weight: 6600KG technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LRX S100-1321 Hjdpfoxwvbvex Ah Dsfr year of construction: 2008 X axis: 550 mm Y axis: 1200 mm Z axis: 2500 mm total weight: 280 kg

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 450 mm Distance between tie bars: 560 x 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Opening width: 1050 mm Platen size (h x v): 790 x 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,10 x 1,90 x 2,10 m Machine weight: 8400 kg Robot Hfodpfxjw E E Eve Ah Djr Producer: Krauss Maffei Type: LRX-100 Year: 2012

Condition: used, Year of construction: 2007, Serial no. 61004286, Control system by Krauss Maffei, type MC4, 2 injection units, rotary table, clamping force 200 t, tie bar clearance 630 x 560 mm, screw diameter 25/18 mm, max. shot weight 47/20.8 g, 2 material loaders by Piovan Hfedpexug R Njfx Ah Dor +++ Attention: This machine is part of an online auction! +++

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m Hfsdjxyqxujpfx Ah Der The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: like new (used), Year of construction: 2006, Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons Tie-bar Spacing: (H × V): 470 mm × 470 mm Maximum Plate Size : 650 mm × 650 mm Minimum Mould Installation Height: 250 mm Hfsdpfxoxqx H Io Ah Djr Maximum Distance between Platen (when fully open): ~750 mm Mould Opening Stroke : 500 mm Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³ Approximate Shot Weight (for PS): 210 g Injection Pressure: 1 670 bar Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power Heating Power: Example listing ~ 10.2 kW Machine Dimensions (Length × Width × Height): 5.4 m × 2.0 m × 2.2 m Machine Weight:4 500 kg

Condition: excellent (used), Year of construction: 2007, clamping force: 1,500 kN, screw diameter: 45 mm, displacement volume: 305 cm³, injection pressure: 2,050 bar, injection weight: 270 g, mold height (min.): 275 mm, Demag IntElect 150/520-610 General Information Year of manufacture: 2007 Weight: 6,900 kg Dimensions (L × W × H): 5.5 × 1.5 × 2.1 (2.3) m Control system: NC4 Operating hours: 26,500 h Clamping Unit Clamping system: 150/... Clamping force: 150 t Platen dimensions (H × V): 770 × 770 mm Hfsdpexxrr Tsfx Ah Der Tie bar clearance (H × V): 520 × 520 mm Mould height (min.–max.): 275 mm (max. increased) Max. distance between platens: 1180 mm Ejector stroke: 125 mm Ejector force: 35 kN Injection Unit Injection unit type: …/610 Screw diameter: 45 mm L/D ratio: 20 Injection volume: 305 cm³ Shot weight: 270 g Specific injection pressure: 2050 bar Wear-resistant screw; bimetallic barrel, standard L:D Three-piece ring-type non-return valve (RSP) Increased injection speed: 300 mm/s Additional Equipment Hour counter reading: 26,500 h - Increased mould mounting height (min. unchanged, max. extended) - Wear-resistant screw; bimetallic barrel; standard L:D; screw diameter 45 mm - Three-piece ring-type non-return valve (RSP) - Electro-hydraulic interface for connecting 2 hydraulic cores on the moving mould plate, via a separate hydraulic unit - Increased injection speed (300 mm/s) - Increased mould mounting height (min. unchanged, max. extended) Offer for the injection moulding machine only

Condition: excellent (used), Year of construction: 2016, operating hours: 28,600 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 570 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 550 mm Max. daylight 1250 mm Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 55 mm Ls/D ratio 23 Injection pressure 2387 bar Stroke volume 570 ccm Shot weight (PS) 519 gr. Injection rate 261 ccm/s Screw speed 260 1/min Plasticising rate max. 49 g/s Nozzle pressure 87 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 6,00 x 2,10 x 2,10 m Total machine weight 11500 kg Hfsdpfx Ahexz Tq Ns Dor Max. mould weight 2535 kg Accessories: - Anti vibration pads Additional Options: - Electrical plasticizing motor - Accumulator - 2 x Air valves - 2 x core pulls on movable plate - 1 x core pull on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 58211, clamping force: 4,500 kN, The machine is powered and can be demonstrated in working condition. Hfsdjx Af Ayspfx Ah Dsr

Condition: excellent (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw diameter: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Hfjdot A Ui Aepfx Ah Dor Safety enclosure Rotary table The machine has run nearly 33,107 hours in automatic mode. Current note – Tax advice and advantage for used machines From 01/07/2025, used machines can also be depreciated for tax purposes with a special annual depreciation rate of 30%. In addition to the more favorable price compared to a new machine, you can claim the same depreciation benefits as for a new machine. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E)

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Hodpfxoxyqw Re Ah Defr Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Hsdpsxqx Avefx Ah Defr Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 193818, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, injection pressure: 2,080 bar, injection weight: 297 g, ejector stroke: 225 mm, opening stroke: 650 mm, plate width: 685 mm, plate height: 685 mm, installation height: 250 mm, total length: 5,500 mm, total width: 1,600 mm, total height: 2,160 mm, overall weight: 6,630 kg, number of injections: 1, input current: 125 A, Equipment: documentation/manual, All items are sold as used and untested unless otherwise specified. Only the injection moulding machine is offered for sale, without handling device or accessories. Please pay attention to the item description. Hjdpfexy Iugox Ah Dofr

Condition: excellent (used), Year of construction: 2018, operating hours: 20,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 55 mm, displacement volume: 523 cm³, Clamping force 2000 kN Mould opening force, max. 101 kN Size of mould platens (h x v) 985 x 915 mm Distance between tie bars (h x v) 630 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 55 mm Ls/D ratio 20 Injection pressure 1904 bar Stroke volume 523 ccm Shot weight (PS) 476 gr. Injection rate 216 ccm/s Screw speed 280 1/min Hfsdpexz Tqvjfx Ah Dsr Plasticising rate max. 49,7 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 37 kW Installed heating capacity 18 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,60 x 2,20 x 2,20 m Total machine weight 11000 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LRX 150 X: 900 mm Y: 700/700 mm Z: 2000 mm C: 0 - 90 Grad Additional Options: - Bluepower - Servodrive - 2 x air valves - 3 x core pulls - 2 x 6-fold water battery

Condition: used, Year of construction: 2007, clamping force: 420 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,000 kg, load hours: 53,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Hodpfsxr N Ursx Ah Dofr

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, screw diameter: 2,518 mm, Arburg 520S 1600 290/70 Two-Component Injection Moulding Machine 12.3 million cycles 86,565 hours manual mode 78,099 hours automatic mode Injection unit 1: horizontal, 290 diameter, max. 71 cm³, screw diameter 25 mm Injection unit 2: vertical, 70 diameter, max. 21 cm³, screw diameter 18 mm Opening stroke: 925 mm Electric index rotation 12-zone integrated hot runner system 3x core pull 2x air blast (needle shut-off valve control) Various customer-specific inputs and outputs Interfaces: - ALS - Temperature control units - Dryers Multilift H 6kg handling unit: - 2x vacuum circuits - 5x double-acting grippers - Z-axis servo, 800mm - C, G, X, and B axes pneumatic - Various customer-specific I/O (gripper monitoring, etc.) Hfedpfx Ahjxzix Ae Djr At Maschinen-Handel, every machine purchased from us comes with a commissioning guarantee. This provides you, as the customer, with maximum security in the used machine market. Important notice! – Tax information and benefit for used machines Starting from 01.07.2025, used machines will also qualify for a special tax depreciation of 30% per year. In addition to the lower price compared to new equipment, you can claim the same depreciation rates as for a new machine. Keyword: Growth Booster (§ 7 section 2 EStG-E)

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Hodpferg Hh Njx Ah Dsfr Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Condition: excellent (used), Year of construction: 2009, SUMITOMO SE350HD-C1600 (2009) Clamping force: 350 t Screw diameter: 63 mm Shot weight: 853 g Distance between tie bars V: 710 mm Distance between tie bars H: 760 mm Plate dimensions: 1070x1020 mm Hedpfx Ahsxqhrgo Dsfr Shot volume: 888 cm3 Type: Horizontal Drive: Electric Only 40.000 hours 2 core pullers

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. Hfsdpsv N D Raofx Ah Der The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service.

Condition: excellent (used), Year of construction: 2014, clamping force: 2,500 kN, Equipment: documentation/manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Hsdpfjxqhfyex Ah Dofr Tie bar distance: 630x630 mm Show weight: 471 g/PS Shot volume: 518 cm3 Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 KN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Opening stroke (max.): 630 mm 5. Mould height (min. / max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Injection speed (max.): 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Equipment of the machine:_ 1. BluePower servo pump drive system (energy-efficient servo-hydraulics) 2. Hydraulic core pull 1× on operator side \+ pressure release system 3. 8-fold water battery with magnetic valve shut-off 4. Hot-runner control 4 zones (ZE 88.5404) 5. MC6 control with 19″ Touch TFT screen 6. PV-control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. BluePower energy-saving servo drive system LRX 150 linear robot (payload < 15 kg), incl.: 1. X = 900 mm / Y = 700 + 700 mm (telescopic) / Z = 2000 mm 2. B-servo / C-pneumatic rotation axes 3. Full integration (MC6 control interface) 4. Safety package – fencing, emergency stop, key switch 5. Vacuum circuits × 4 (Venturi) 6. Transport conveyor interface & control circuit 7. CE conformity declaration for integrated system (IMM + Robot) 8. Painted RAL 9002 grey-white / Pantone 3005 blue 2014 Running hours: 42.084