Used Machines with a clamping force of 250 - 999 kN for sale (287)

Condition: used, Year of construction: 2005, operating hours: 63,000 h, Functionality: fully functional, clamping force: 400 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 400-60 The machine is fully functional and ready for immediate use Technical data Cgelou Hqh Ron Epdmjt Year of construction: 2005 Operating hours: 63,000 h Cylinder: Ø 25 Clamping force: 400 kN Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2003, max. clamping force: 700kN, screw diameter: 20/25/30mm, max. screw stroke: 100mm, max. screw peripheral speed: 30/37/45 m/min, max. screw torque: 240/300/350 Nm. Dimensions X/Y/Z: 3300mm/1455mm/1990mm, weight: approx. 2100kg. Cgelsr Dd Iaon Epdmst

Condition: excellent (used), Year of construction: 1999, Battenfeld Cgoln Estputijpdmst 400-125 CDC Closing 40 tons Year 1995 Scrow 30 mm Injection weighted 77,8 g Spar spacing 27x32

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Cgeln Epouc Szzsdmjt

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Engel ES 200 | 50 HL Always used in a school. Very low hours. Cgolnsv Abvgo Epdmjt Machine can be loaded.

Condition: good (used), Year of construction: 1995, operating hours: 1,04,536 h, Functionality: fully functional, machine/vehicle number: F40, clamping force: 400 kN, screw diameter: 25 mm, clearance between the columns: 270 mm, displacement volume: 49 cm³, mold height (min.): 200 mm, ejector stroke: 125 mm, opening stroke: 350 mm, overall weight: 5,900 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 63 A, Machine is currently in use. Can be viewed in operation. Cgoln Eovrftbepdmot

Condition: ready for operation (used), Year of construction: 2001, clamping force: 500 kN, injection pressure: 2.2 bar, For sale is an injection molding machine of the brand Arburg and the type 320 S 500-150 The machine is in working order Coln Epdoqmn Egjmegt Technical data - Clamping force: 500 kN - Distance between the tie bars: 320 mm x 320 mm - Mold thickness: 225-350 mm - Clamping platen dimensions: 445 mm x 445 mm - Opening of the clamping platen: max. 550 mm - Screw diameter: 30 mm - Injection pressure: 2 200 bar - Weight: 2 250 kg On request, for an additional charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Cgjln Epdsilhfcomst

Condition: excellent (used), Year of construction: 2001, Krauss Maffei KM 125-50 C Coln Epog U Ar Rjdmegt year 2001 Closing 50 TO

Condition: excellent (used), Year of construction: 2019, operating hours: 9,900 h, Functionality: fully functional, Injection molding machine Engel VC200/50 Year of manufacture 2019 / approx. 9900 operating hours Engel control system Total height: approx. 1,800 mm Total length: approx. 3,800 mm Total width: approx. 1,500 mm Total weight approx. 2,900 kg Clamping force 500 KN Screw diameter 30 mm Table ejector stroke 100 mm Cgolnovx T U To Epdmst Injection pressure 200 bar Heating zones 4 10x heating channel / core pull on ejector side Opening stroke max. 400 mm Robot pneumatics Engel ER-USP5 (year of manufacture 2019) Dryer Motan Luxor CA 15

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164173, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 550 mm, injection pressure: 1,451 bar, TECHNICAL DETAILS Control: CC 200 Clamping force: 400 kN Dimensions of the mounting plates (h x v): 550 mm x 430 mm Mold height (min.): 180 mm Maximum opening width: 530 mm Injection unit Screw diameter: 30 mm Injection volume: 99 cm³ Injection pressure: 1,451 bar Csljvpg T Den Epdmogt MACHINE DETAILS Rated power of the pump motor: 15 kW Net weight with control cabinet: 2.7 t Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m

Condition: used, Year of construction: 2004, operating hours: 81,500 h, clamping force: 80 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 2,210 bar, overall weight: 5,200 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC 200/80 Power Condition: aus laufender Produktion Operating hours: ca. 81.500 CLAMPING UNIT: - Clamping force: 80 t Öffnungsweg: 450 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 670 x 600 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU200 Screw diameter: 30 mm Injection weight in polystyrol: 90 g Cgsloqym Rgsn Epdmst Stroke volume: 99 cm³ Einspritzdruck: 2.210 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: ja / yes Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 5.200 kg Total size L x B x H: 4,0 x 1,4 x 2,0 m

Condition: good (used), Year of construction: 2000, operating hours: 59,358 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, For sale is an injection molding machine of the brand Arburg and the type 370 Selectra 800-350 The machine is well maintained and fully functional SD card drive retrofitted Video available soon Technical data Year of construction: 2000 Clamping force: 800 kN Control system: Logica Screw diameter: 35 mm Pumping hours: 69544 h Automatic operation: 59358 h On request, for an extra charge, the machine can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Cgoln Eporywlqedmot Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2002, operating hours: 18,800 h, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, BATTENFELD vertical injection press Cgolnevkx D Rj Epdmst Reference R600 / 125 V UNILOG B4 control Rotary plate diameter: 896 mm Number of hours: 18,819 hours Year: 2002 Screw diameter: 25 Injection pressure: 2149 bars Injectable volume: 58.9 cm3 Injectable weight in PS: 53.6 Gr Screw L/D ratio: 21.6

Condition: excellent (used), Year of construction: 1991, Engel ES 200/50 HL Closing 50 tons Year 1991 Scrow 30 mm Cjln Eeld Nt Sepdmegt EC 88

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 181721, clamping force: 350 kN, screw diameter: 18 mm, displacement volume: 25 cm³, ejector force: 20,100 N, ejector stroke: 105 mm, pressure: 2.2 bar, TECHNICAL DETAILS Clamping force: 350 kN Opening stroke: 205 mm Ejector stroke: 105 mm Ejector force: 20.1 kN Cslneunldhj Epdmegt Injection unit Screw diameter: 18 mm Max. stroke volume: 25 cm³ Max. screw speed: 450 rpm Max. current screw speed: 450 rpm Injection flow: 52 cm³/s Injection flow increased: 40 cm³/s Specific injection pressure: 2,200 bar Specific injection pressure increased: 2,193 bar Nozzle travel: 530 mm Nozzle contact pressure: 28.6 kN MACHINE DETAILS Machine weight: 6,700 kg L x W x H: 6 x 1.5 x 2.5 m

Condition: ready for operation (used), Year of construction: 2004, Arburg thermolift 100-2 Tank capacity : 200 l Voltage: 400V Heating : 4.5 kW Cslnjvi Iqqj Epdmegt Blower : 1.68 kW Power : 6.2 kW

Condition: good (used), Year of construction: 2004, Functionality: fully functional, clamping force: 350 kN, screw diameter: 18 mm, clearance between the columns: 280 mm, displacement volume: 23 cm³, ejector force: 26,000 N, ejector stroke: 100 mm, plate length: 450 mm, plate width: 460 mm, total height: 2,000 mm, overall weight: 2,750 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 530 mm, Equipment: documentation/manual, injection moulding machine DEMAG concept 35/280-80 warehouse no.: 503175 manufacturer: DEMAG type: concept 35-280-80 controller: NC4 year of construction: 2004 Cjlnjvbgnre Epdmsgt technical data clamping unit clamping force: 350 kN distance between tie-bars h x v: 280 x 280 mm size of mould plates h x v: 460 x 450 mm min. mould height: 180 mm max. open daylight: 530 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 26 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm weight of mould: 230 kg technical data injection unit screw diameter: 18 mm swept volume: 23 ccm injection pressure: 2868 bar screw length: 20 l/d screw stroke: 90 mm plasticising rate: 3 g/s PS injection rate into the open: 68 g/s PS number of heating zones: 4 nozzle stroke: 170 mm measures & weight measures of machine l x w x h: 3.42m x 1.38m x 2m total weight: 2750KG equipment included screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A

Condition: good (used), Year of construction: 2000, operating hours: 83,000 h, clamping force: 350 kN, screw diameter: 25 mm, For sale is an injection molding machine of the Marker Arburg and the type 320S 350-60 Year of construction: 2000 Operating hours automatic: 83000 Screw diameter: 25 mm Clamping force: 350 kN Barrel length: 60 On request, transport can be organized throughout Europe for an additional charge. Price incl. VAT Cgslshhuq Aen Epdmot Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2023, Condition: as good as new (ex-display), Krauss Maffei KM 50 - 100 PX injection moulding machine Year of manufacture - 2023 Closing unit 5-point clamping unit with double switch (3 plates), with electric servo drive. Injection unit with electric servo drive and plasticising axes, as well as servo-hydraulic movement of the injection unit. MC6 control based on an industrial PC with real-time Ethernet technology. Plasticising unit complete thermoplasticisation unit screw diameter 22 mm nozzle radius 10 mm, nozzle opening 4 mm Clamping force [kN] 500 Clamping plate dimensions (hxv) [mm] 490 x 440 Clearance between columns (hxv) [mm] 370 x 320 Min./ max. mould height [mm] 150 - 450 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 38 Injection size [g] 35 Injection pressure [bar] 2500 Electric-hydraulic equipment Cgoln Epepy Drhjdmjt Pump motor rated power [kW] 6.1 Heater power [kW] 6.3 Dimensions and weight Net weight with control unit [t] 4 Dimensions (L x W x H) [m] 4.2 x 1.44 x 1.85

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Coln Epsvlangsdmjgt Closing 60 TO Year 1999 Scrow 30 mm Enlarged clamping plate 660x560

Condition: ready for operation (used), Year of construction: 2015, operating hours: 19,718 h, Functionality: fully functional, machine/vehicle number: 233358, clamping force: 500 kN, screw diameter: 20 mm, injection pressure: 2.5 bar, ejector force: 30,000 N, ejector stroke: 70 mm, TECHNICAL DETAILS Model: 375 V 500 - 100 Sliding table Operating hours: 19,718 h Cslneunk Swj Epdmsgt Clamping unit Clamping force: 50 tons Opening stroke (max.): 30 / 250 kN/mm Mold height (variable): 172 - 272 mm Clamping platen height (variable): 422 - 522 mm Stroke of the shuttle table: 650 mm Weight on shuttle table: max. 240 kg Weight of the movable molded part: max. 230 kg EUROMAP drying time: 3 - 240 s Ejector force / stroke: 30 / 70 kN / mm Injection unit Screw diameter: 20 mm Effective screw length: L/D 25 Screw stroke: max. 80 mm Calculated stroke volume: max. 31 cm³ Shot weight: max. 29 g PS Material throughput: max. 5.5 kg/h PS, 2.8 kg/h PA6.6 Injection pressure: max. 2,500 bar Holding pressure: max. 2,500 bar Injection flow: max. 64 cm³/s Peripheral speed of the screw: max. 28 m/min Screw torque: max. 120 Nm Nozzle contact force / stroke: max. 50 kN / 180 mm Heating power / zones: 6.7 kW / 5 zones Material hopper: 25 l MACHINE DETAILS Weight: 3,700 kg Dimensions: 3,250 x 2,524 x 1,475 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 9,900 h, Functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, injection pressure: 2.025 bar, ejector force: 22 N, ejector stroke: 150 mm, TECHNICAL DETAILS Closing force of the mold: 800 kN Mold opening force: 120 kN Clamping platen dimensions (h x v): 640 x 590 mm Clearance between the columns (h x v): 485 x 435 mm Opening stroke of the mold: 350 mm Mold height: 150 - 400 mm Opening width: 750 mm Ejector stroke: 150 mm Ejector force forwards/backwards: 22 / 10 kN Ejector speed: 350 mm/s Injection unit Screw diameter: 25 mm Ratio Ls/D: 20 Injection pressure: 2.025 bar Injection volume: 49 cm³ Injection weight: 45 g Injection speed: 125 mm/s Cgslnoul Uihj Epdmst Injection capacity: 61 cm³/s Screw speed: 382 1/min Plasticizing capacity: 7.8 g/s Torque: 89 Nm Thrust of the nozzle: 21 kN MACHINE DETAILS Net weight with control cabinet: 5.9 t Machine dimensions (L x W x H): 4.80 x 1.60 x 1.88 m Connected load: 6.1 kW Fuse rating: 63 A Installed heating capacity: 6.3 kW Number of cylinder heating zones: 4 Drying time / stroke according to Euromap 6: 1.5 s / 340 mm Oil tank capacity: 120 dm³ EQUIPMENT - Five-point double-lever toggle clamping unit mechanism (three-platen unit) with servo-electric drive - Injection unit with servo-electric drive for injection and plasticizing as well as servo-hydraulic drive for moving the entire injection unit - MC6 control system based on an industrial PC with real-time Ethernet technology - Plasticizing system with a screw diameter of 25 mm, nozzle radius 10 mm, nozzle opening 4 mm

Condition: excellent (used), Year of construction: 2009, operating hours: 70,171 h, Functionality: fully functional, clamping force: 900 kN, screw diameter: 38 mm, displacement volume: 38 cm³, injection pressure: 2.06 bar, ejector force: 40,000 N, ejector stroke: 130 mm, plate length: 680 mm, plate width: 740 mm, total length: 4,400 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 6,700 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, clear span: 800 mm, Equipment: documentation/manual, injection moulding machine ENGEL VICTORY 80-90 tech warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h technical data clamping unit clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm Celn Epdsu T D Egsmsgt opening stroke: 500 mm ejector stroke: 130 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm technical data injection unit screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar screw length: 19 l/d screw stroke: 100 mm screw speed: 360 min injection rate into the open: 78 g/s PS number of heating zones: 4 nozzle stroke: 230 mm measures & weight measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x

Condition: excellent (used), Year of construction: 2009, Battenfeld HM 65/210 injection molding machine Year of manufacture - 2009 Control - Unilog B6E Closing unit : - maximum closing force : 650 kN - clearance between columns : 370 x 320 mm - minimum mold height : 225 mm - mold opening path/force : 450/35 mm/kN Coln Epdju U A Ivemsgt - maximum possible distance between clamping plates : 675 mm - ejector travel/force : 150/26.4 mm/kN Injection unit : - screw diameter : 30 mm - specific injection pressure : 2042 bar - calculated injection volume : 106 cm3 - L/D ratio of screw : 22 - screw speed : 310 min to -1 - maximum screw torque : 490 Nm - plasticization capacity : 12.0 g/s PS Technical parameters : - power of drive system : 11 kW - dry cycle time according to EUROMAP 6 : 1.8-259 s-mm - oil tank capacity : 200 l - machine dimensions : 3.6x1.4x2.0 m - weight of the injection machine : 3100 kg