Used injection molding machines with a clamping force of 250 - 999 kN for sale (250)

Condition: excellent (used), Year of construction: 2008, Model: Boy 55 A Clamping force: 55 tonnes Year of manufacture: 2008 Godpexvihtsfx Ah Deca Screw diameter: 32 mm Shot weight: 92 g Operating hours: 48,000 h

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Godpfouykh Dox Ah Deca Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 25 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: new, functionality: fully functional, MIKROMOLD desktop injection molding machine It was not used, NEW. It is electrically driven and suitable for individual and series production of small plastic parts. The machine requires small space. Parameters: Closing force: 30kN Gsdpjxrcq Hsfx Ah Doca Piston diameter: 20mm Dose: cca15g Tool: width 75-120 mm, hight min. 80 mm, length 75-120 mm Dimensions: hight 1100 mm, width 310 mm, length 850 mm Weight: 60 kg Heating: 730W Injection molding: max. 700bar Energy demand: 230V; 50Hz Power requirements: 240V; 50Hz Materials used: General plastics + macromelt Control: card PC Machine handling: 7-inch touch screen (HMI) for data entry and status display, two-hand start and emergency button Data management: 40 program saves Material feeding: From a tank on the machine, gravity-fed The manufacturer's complete manual is available for the machine. Application areas: Due to the incredible versatility of injection molding, it can be found in almost every industry. Automotive industry - one of the largest users Cars contain many plastic parts, such as bumpers, dashboards, door panels, light housings, under-the-hood components (e.g. intake manifolds, tanks), and smaller interior components such as buttons and switches. The use of plastics contributes to reducing the weight of vehicles, which results in fuel efficiency and lower emissions. It is particularly important in the medical and pharmaceutical industries, for the production of disposable medical devices such as syringes, petri dishes, catheter connectors, drug dispensers and diagnostic test housings. Electronics industry - for the housings, connectors, buttons and other precision parts of devices, e.g. plastic housings of mobile phones, laptops, televisions and household appliances. Consumer goods and household appliances - toys (e.g. LEGO), kitchenware, furniture, sports equipment and most garden tools. Housings, handles and internal parts of household appliances such as washing machines, vacuum cleaners and coffee makers. Packaging industry - bottle caps, food containers, buckets, crates and other packaging materials Construction industry - pipe connectors, fittings, switch and socket covers, insulation elements and other profiles. PVC and PP are common in this application area, where durability, chemical resistance and ease of installation are the main considerations. Agriculture - elements of irrigation systems, machine covers, tank and other equipment parts. Corrosion resistance and durability are key here.

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 153 cm³, injection pressure: 2,174 bar, injection weight: 160 g, mold height (min.): 250 mm, ejector stroke: 100 mm, opening stroke: 450 mm, plate length: 700 mm, plate width: 700 mm, type of input current: three-phase, pressing force: 80 t, For sale: 2004 machine, fully operational, with robot. Godpfjxqyhysx Ah Doca

Condition: excellent (used), Year of construction: 2007, Injection Moulding Machine Krauss Maffei KM 110-750 CX Year of manufacture: 2007 Machine Description The Krauss Maffei KM 110-750 CX injection moulding machine is a modern unit with a fully hydraulic clamping system. It is equipped with the MC5 control system featuring a color monitor, integrated control panel, and three USB ports. Gcsdpfxjxqzz Ue Ah Dea The machine is fitted with a complete plasticising unit designed for processing thermoplastics, with an abrasion-resistant version. The screw (diameter 45 mm) is equipped with a non-return valve and open nozzle. Technical Data Clamping Unit Parameter Unit Value Clamping force kN 1100 Mould opening force kN 70.0 Movable platen stroke force – opening kN 35.4 Movable platen stroke force – closing kN 31.4 Platen dimensions (h × v) mm 745 × 770 Tie bar spacing (h × v) mm 470 × 470 Mould opening stroke mm 600 Mould height (min.) mm 300 Total daylight (max.) mm 900 Ejector stroke mm 150 Ejector force kN 22.6 / 9.9 Injection Unit Parameter Unit Value Screw diameter mm 45 Injection pressure bar 2336 Shot volume cm³ 318 Shot weight (PS) g 289 Screw speed (standard / option) rpm 265 / 355 Electrical and Hydraulic Equipment Parameter Unit Value Nominal pump motor power kW 22 Installed heater capacity kW 15.62 Number of cylinder heating zones - 5 Dry cycle time (Euromap) cycles/h 2000 Oil tank capacity l 489 Dimensions and Weight Parameter Unit Value Net weight with control cabinet t 6.2 Machine dimensions (L × W × H) m 4.9 × 1.6 × 2.1

Condition: used, Year of construction: 2005, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, load hours: 81,700 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Gsdpfsrbqtnsx Ah Djca Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: excellent (used), Year of construction: 1997, Engel ES 330/90 HL Year of manufacture: 1997 Screw diameter: 35 mm Gcodpfx Ahext S Tys Dja

Condition: excellent (used), Year of construction: 2007, VICTORY 200/50 Focus CC200 controll Gcjdpfexghavex Ah Dsa Clamping force: 50 t Screw diameter: 30 mm Type: Horizontal Drive: Hydraulic

Condition: good (used), Year of construction: 2007, Ref. no.: 18588 Hersteller: BATTENFELD Type: EM 30/55 Unilog B6 Run hours: 3.200 Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Gcsdjxdk Auepfx Ah Doa Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 21953, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 405 mm, injection pressure: 1,300 bar, injection weight: 239 g, ejector stroke: 100 mm, installation height: 430 mm, total length: 3,910 mm, total width: 1,380 mm, total height: 2,050 mm, overall weight: 4,000 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, The machine is in good condition and has been maintained during operation with short maintenance intervals. The machine is connected and fully functional. An inspection with test run is possible. All machine documentation is available. The screw, heating cylinder tube, and RSP were renewed in 2022 by Plasma Kunststofftechnik. Basic data: - No: 21953 - Year of manufacture: 1991 - Weight: 4000 kg - Clamping force: 800 kN - Dimensions: 3910 mm x 1380 mm x 2050 mm (LxWxH) - Control system: CC100 Technical details: - Operating voltage: 400V 3~ 50Hz - Screw diameter: 45 mm - Screw geometry: 3-zone - Max. dosing stroke: 160 mm - Nozzle thread: M28x1.5 - Max. injection pressure: 1300 bar - Shot weight PS: 239 g - Tie bar spacing, horizontal: 405 mm - Tie bar spacing, vertical: 345 mm - Max. opening stroke: 430 mm - Min. installation height: 150 mm - Max. installation height: 430 mm - Centering diameter: 125 mm - Cooling circuits: 6 Gcodpfx Ahjxcw T Ro Dea - Core pulls: 1 - Max. ejector stroke: 100 mm - Excl.: Piovan dosing unit, conveyor belt

Condition: excellent (used), Year of construction: 2010, operating hours: 75,942 h, functionality: fully functional, machine/vehicle number: 213141, clamping force: 400 kN, screw diameter: 18 mm, clearance between the columns: 270 mm, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models currently manufactured in 2010 or later. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 270C 400-70 Gedpfx Aewfua Ash Dsca Control unit: Selogica Year of manufacture: 2010 Operating hours: 75,942 h Machine number: 213141 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separation gate German language - From first owner - Made in Germany Continuous maintenance by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 t Tie-bar spacing: 270 x 270 mm Clamping platens: 446 x 446 mm Opening stroke: 350 mm Mold height: 200 mm min. Distance between platens max. 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max. Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electrical system Pump: 11 kW Heating: 4 zones, 4 kW Installed power: 15 kW Pre-fuse: 50 A Weight: 2150 kg Warranty Warranty until first use Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our Hanover/Germany warehouse Information about the machines we offer and our company - We only sell our own machines purchased from ongoing production from our Hanover warehouse - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - We are NOT an agent dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a matter of course - All machines offered can be inspected in our warehouse

Condition: used, Year of construction: 2020, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, load hours: 4,200 h, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request Gjdpfxov S H N Rs Ah Deca terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2004, Engel Victory 330/80 Phoenix Gcedpfxjxq Ti Ro Ah Dsa Clamping force: 80 tons Year of manufacture: 2004 Screw diameter: 40 mm

Condition: good (used), Year of construction: 2000, Clamping force: 40 t Screw diameter: 25 mm Shot weight: 45 g Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Platten dimensions: 446 x 446 mm Shot volume: 49 cm3 Gcedpfx Ahsxdm Sxe Doa Working hours: 59.000 h Type: Uni Drive: Hydraulic

Condition: like new (used), Year of construction: 2007, operating hours: 58,263 h, functionality: fully functional, machine/vehicle number: 203130, screw diameter: 25 mm, displacement volume: 59 cm³, injection weight: 54 g, Equipment: documentation/manual, As an injection molding machine dealer, we offer the following well-maintained used injection molding machine. Of course, we also purchase well-maintained injection molding machines, models from 2010 onwards. We have been a wholesaler of injection molding machines for over 25 years. Manufacturer: Arburg Type: 320C 500-170 Serial Number: 203130 Year of Manufacture: 2007 Operating Hours: 58,263 h Dimensions: L/W/H: 3.12 x 1.43 x 1.99 Weight: 2300 kg Fully functional Condition very well maintained Extras Handling interface Thermoplastic screw/barrel 25 mm, highly wear-resistant Selogica control system Injection unit Screw diameter 25 mm Injection weight 54 g/hp Injection pressure 2500 bar Injection volume 59 cc Clamping unit Clamping force 50 t/500 kN Tiebar spacing 320 x 320 mm Clamping platens 446 x 446 mm Mold installation height 200 mm Maximum spacing between platens 550 mm Ejector stroke/force 125 mm/30 kN Clamping unit hydraulic Motor power 11 KW Heating power 9.4 KW Total power 21 KW The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) German language - From first owner - Made in Germany Constant maintenance by the manufacturer and previous owner Warranty Warranty until first commissioning Loading/Shipping Free loading onto the buyer's truck or free delivery against freight reimbursement Available from our warehouse in Hanover, Germany Information about the machines we offer and our company Godpfx Asv U Tl Deh Djca - We only sell our own machines purchased from ongoing production from our warehouse in Hanover - All machines offered are inspected and tested before dismantling - We do NOT sell insolvency goods - we are NOT an agent dealing with third-party property. - All machines offered come from successful companies for which maintenance and care are a matter of course - All machines offered can be viewed in our warehouse

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, load hours: 60,790 h, screw conveyor diameter: 18 mm, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Godpfxjh Tk Rvs Ah Djca Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: good (used), Year of construction: 2001, • Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm Gcjdpfx Ajwgamkeh Dja • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

Condition: like new (used), Year of construction: 2008, operating hours: 72,967 h, functionality: fully functional, machine/vehicle number: 208574, Equipment: documentation/manual, Here we offer the following well-maintained used injection molding machine as an injection molding machine/trading dealer. Of course, we also purchase well-maintained injection molding machines from model year 2010 onwards. We have been wholesalers of injection molding machines for over 25 years. Manufacturer: Arburg Type: 270C 400-70 Control unit: Selogica Year of manufacture: 2008 Operating hours: 75,942 h Machine number: 208574 Extras - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Separator valve German language - From first ownership – origin Germany Continuous maintenance by the manufacturer and previous owner Clamping unit Clamping force: 400 kN / 40 tons Tie bar distance: 270 x 270 mm Mounting plates: 446 x 446 mm Opening stroke: 350 mm Mold height: 200 mm min. Distance between plates max. 550 mm Ejector stroke: 125 mm Ejector force: 30 kN max Injection unit Screw diameter: 18 mm Injection volume: 23 cc Shot weight: 21 g Injection pressure: 2500 bar Electric Pump: 11 KW Heating: 4 zones, 4 KW Installed power: 15 KW Circuit breaker: 50A Weight: 2150 kg. Godswn Nr Eopfx Ah Deca Warranty Warranty until first commissioning Loading/shipping Free loading on buyer's truck or free delivery to your door against freight reimbursement Available from our warehouse in Hannover / Germany For information about the machines we offer and our company: - We only sell our own machines, which we purchase from ongoing production from our warehouse in Hannover - All offered machines are checked and tested before removal - We do NOT sell insolvency goods - we are NOT brokers dealing in third-party property. - All machines offered come from successful companies where maintenance and care are a matter of course - All offered machines can be inspected at our warehouse

Condition: used, Year of construction: 2001, clamping force: 60 kN, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, screw conveyor diameter: 30 mm, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Gcsdpfxsh Nvnwj Ah Dja Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Gedpfx Ahsvl Skao Dsca Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: excellent (used), Year of construction: 2006, Here we offer a maintained injection molding machine. from the following machine we have other machines of the same type in stock Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras - installed Language: German Englisch - enlarged clamping plates (B-plates) - minimum installation height 250 mm - maximum plate distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - host computer interface Engel EMS - without material hopper or conveying unit Clamping unit clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. Dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH - available immediately in our warehouse Hanover free loading or free delivery against freight reimbursement Gcsdolc R Tdspfx Ah Dsa - function tested (guaranteed function until first start-up)

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 490 cm³, injection pressure: 2,000 bar, overall weight: 2,300 kg, load hours: 60,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Gcjdsxa Htzspfx Ah Dsa

Condition: like new (used), Year of construction: 2017, Vertical Arburg Schiebetisch 375 V 500-100 (2017, working hours: 19.719) Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Working hours: 19.719 Equipment: 3x hot runner 1x hydraulic core puller Gsdpfxeu Ep Ime Ah Dsca 1x pneumatic core puller

Condition: good (used), Year of construction: 1996, operating hours: 32,750 h, functionality: fully functional, machine/vehicle number: 266568, clamping force: 750 kN, screw diameter: 3,025 mm, displacement volume: 8,549 cm³, full functional 2-colour /2 component injection molding machine K75-S 2F in L-Format Year 1996 Internationale Size 750H 200/100 L working hours: 32750 h controller: IQT 6 (german Text) clamping unit (extende tie bars +200mm) Gcodpecud Nhofx Ah Dsa clamping force: 750 kN/ 75 tons distanc. tie bars: 420 x 420 mm platens dist. max: 850 mm (max) tool height: 400 mm (min) platens size: 605 x 605 mm ejector force: 34 kN ejector stroke: 150 mm centering: 125 mm (nozzle/ejtector plate) injection units +++1. Aggregat+++ horizontal injection unitt (intern. size 200) screw diameter: 30 mm shot volume: 85 ccm injection pressure 2350 bar 4 x heating zones +++2.Aggregat+++ vertical injection unit (intern. Size. 100) screw diameter 25 mm shot volume: 49 ccm injection pressure 2022 bar 3 x heating units Extras accumulator core pull water battery hopper Dimensions /Elektric Motor 30 KW Heating 11,7 KW weight: 5100 kg dimensions: 4,5 x 1,5 x 2,5 (LxBxT) Painting: RAL 7016, 7035, 1012 available available now at our storage Hannover/Germany all our offered machines are in our own property

Condition: used, Year of construction: 1998, clamping force: 50 kN, displacement volume: 200 cm³, injection pressure: 2,587 bar, overall weight: 2,500 kg, load hours: 45,000 h, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Gcsdpfx Ahjwi Uzhj Doa delivery time: on request terms of payment: 100% prior to delivery