M. Roter GmbH

Condition: used, Year of construction: 2006, Motor-adjustable parallel guide; length stop with display; single-sided motorized tilting; sliding carriage, 3000 mm; 5.5 kW; scoring cutter; cutting width 1000 mm. Bodozx Tmfepfx Abtedg Location: Nattheim.

Condition: used, Year of construction: 2016, gearing type: other, first registration: 01/2016, mileage: 1,001 km, empty load weight: 970 kg, driver cabin: other, Vehicle location: Bovenden. Bdedszx Tl Uepfx Abteg Equipment: Salt spreader with a capacity of approximately 2.5 m³ and a 1280-liter liquid salt tank, plus a 1280-liter liquid salt tank and a 2.5 m³ dry salt tank on a Unimog. ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2016, gearing type: other, first registration: 01/2016, color: orange, mileage: 1,001 km, empty load weight: 765 kg, driver cabin: other, Vehicle location: Bovenden. Bdodpozx Tl Iofx Abteg Approximate clearance width: 2600 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1,54,360 km, power: 103 kW (140.04 HP), first registration: 09/1998, fuel type: diesel, empty load weight: 3,920 kg, maximum load weight: 3,580 kg, overall weight: 7,500 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 2,830 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, loading space length: 1,950 mm, loading space width: 1,900 mm, loading space height: 400 mm, Equipment: additional headlights, all wheel drive, cabin, differential lock, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel body, short cab, high roof, air-suspension seat, rear window, 8-speed gearbox, ABS (anti-lock braking system), constant throttle, auxiliary drive, raised exhaust, differential lock, long-range headlights, rotating beacon, trailer hitch ball, towing device, low-noise G1, winter service equipment, swing-out tailgates, roof hatch. Wheelbase: 2830 mm, Body: 3-sided tilting body, axle ratio: slow, trailer brake system, two-line, mounting brackets front, mounting brackets rear, higher cab roof, fine dust and pollen filter, sound and heat insulation for cab, auxiliary transmission with intermediate and super-crawl gear, dual clutch, shift plate, hydraulic system with 4 circuits, tilting cylinder, hydraulic connection at the rear 6-way, hydraulic connection at the rear 4-way, cell 3+4, separate return line at the rear, hydraulic connection at the front 4-way, cell 1+2, hydraulic connection at the front 4-way, cell 3+4, separate return line at the front, engine brake, engine PTO switchable, PTO front 1 3/8 keyway, PTO rear split 1 3/8 keyway. Loading height approx. 1420mm! Approx. €3,000.00 invested (paint, refurbishment and technology). Matching snowplow -9996- available for an additional charge of €1,500.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Bdjdpfezx Tlzsx Abteg

Condition: used, Year of construction: 2011, Connected load: 10 kW. Dust extraction: 1x 120 / 3x 60 / 1x 100 mm. Feed rate: 10 m/min. Workpiece thickness: 8 - 50 mm. Edge thickness: 0.4 - 3.0 mm. Roller separation: max. 0.4 - 3.0 mm x 45 mm. Working height: 950 mm. Dimensions: 4280 x 1300 x 2180 mm. Weight: approx. 1400 kg. Storage location: Supplier. Bedjzx Tlnspfx Abtedg

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck: 500 mm Bedpozx Tkqjfx Abtjdg Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 405 mm, travel distance Z-axis: 2,049 mm, bar diameter (max.): 80 mm, controller manufacturer: SIEMENS, controller model: 840C, number of axes: 3, Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details. • Chuck diameter: 400 mm Technical Specification Counter Spindle No Bdodpszx Ti Tsfx Abtog Driven Tools Yes

Condition: excellent (used), Year of construction: 2018, Complete workshop, machinery for window production Conturex Weinig window production line Bjdpfx Aezx Ti Hobtsdg Scm DMC sanding machine SY TM 1650 SCM Record 240 NT Weinig mortise and tenon press Laminated timber press Veneer press OMC Frame press Casolin Edge profiling machine SCM Painting system / spray booth Table saw Felder Table circular saw Felder Double miter saw Stop tables Ruchser Mullion machine Stegherr Sanding machine Kundig Sanding machine Löwer Drilling machine Ganner Dust extraction system Mion Mosole and many other machines

Condition: used, Manufacturer: STT Type: Dryer 1500 Factory/Manufacturer number: 930671 Device type: Refrigerant dryer / Compressed air dryer Supply voltage: 400 V Phases / Frequency: 3-phase / 50 Hz Control voltage: 230 V Power consumption: 5,505 W Current consumption: 10 A Refrigerant: R134a Bdodszx Tiyepfx Abtjg Refrigerant charge: 830 g Design: Stand-alone unit

Condition: used, Year of construction: 2012, lifting height: 10,440 mm, fuel type: electric, Empty weight: 2.860 kg Working height: 1.244 cm CE mark: yes General condition: poor Technical condition: poor Visual appearance: poor Bdjdpfxjzx Titj Abtsg Delivery terms: EXW Production country: DE Please contact Christian Theißen for more information Manufacturer: HAB Model: S124-10 E2WD Year of build: 2012 Condition: Used Data: Max. working height: 12,44 m Max. platform height: 10,44 m Drive type: Battery Platform dimensions: 2,46 x 0,98 m Lifting capacity: 350 kg Lifting capacity on extension: 350 kg Platform length pushed out: 3,65 m Total dimensions LxW: 2,71 x 0,98 m Height transport position with/without railing: 2,61 / 1,94 m Movable up to working height: 12,44 m Ground clearance: 0,10 m indoor use only: yes Empty weight: 2.860 kg Special features: white tires, anchor points for restraint systems (PPE) available. Information: defective Location: 41468 Neuss sofort verfügbar

Condition: ready for operation (used), Year of construction: 1989, Semi-automatic broach sharpening machine 3M601Ф1 Manufacturer: Vitebsk Tool Grinding Machines Specifications: Max. external diameter of round broaches: 250 mm Bdjdpezx Timsfx Abtsg Max. workpiece length (between centers): 2000 mm Application: Round, spline, flat, face, and keyway broaches.

Condition: used, Year of construction: 1984, planing width: 630 mm, number of blades: 4, Martin T 42 Thickness Planer Working width 630 mm 380 V Bdedpfx Aozx Tigobteg Year of manufacture 1984 Max. 5000 rpm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: FANUC, controller model: MXP-200I, table load: 800 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis YCM MV106A vertical machining centre was manufactured in 2006. It features a generous XYZ travel of 1020 x 600 x 600 mm and a robust table size of 1120 x 600 mm, with a maximum table load of 800 kg. The machine is equipped with a 30-tool automatic tool changer and coolant in the spindle. If you are looking to get high-quality machining capabilities, consider the YCM MV106A machine we have for sale. Contact us for further details. Technical Specification Taper Size SK 40 Bedpfjzx Th Asx Abtsdg

Condition: used, empty load weight: 3,840 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2015, next inspection (TÜV): 07/2020, loading space length: 5,200 mm, loading space width: 2,430 mm, loading space height: 1,080 mm, loading space volume: 14 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Color: orange / silver Disc brakes EBS (Electronic Braking System) Payload: 14,160 kg Air suspension with lift function Aluminum side panels on the left side, pivoting and foldable with lift springs – rear steel, pivoting Rollover tarp Bdedpfozx Thvox Abtsg Platform SAF axles Aluminum rims Foldable underrun protection Lifting and lowering system Tie-down rings Subject to errors and omissions.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 77 h, Martin circular saw T 75 with CE configuration – with only 77 operating hours. High-quality features: - Large, color touch screen - Prex saw head – swivels on both sides including optional package 4: - Stepless speed control, 9.5 kW - Electronic positioning of the parallel fence - Pre-scoring system PreX 3-axis pre-scoring unit incl. pre-scoring saw blade Bdedezx Thpopfx Abteg - Miter cutting system RadioCompens with 2-point support - Rip fence length 3.7 m - Cutting width 1100 mm, electronically controlled - Parallel fence electronically controlled and pneumatically lowerable at the end position - Table extension at the rear 610 x 860 mm incl. tool compartment - Front table work surface 600 x 350 mm - Laser – cutting line indicator, green - Operating manual, parts list, accessories The machine has only 77 operating hours and is in its original condition.

Condition: used, mileage: 8,328 km, power: 96 kW (130.52 HP), first registration: 08/2025, fuel type: diesel, empty load weight: 2,411 kg, maximum load weight: 1,089 kg, overall weight: 3,500 kg, wheelbase: 3,750 mm, next inspection (TÜV): 08/2027, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 6, loading space volume: 11 m³, loading space length: 3,150 mm, loading space width: 1,750 mm, loading space height: 2,050 mm, maximum speed: 155 km/h, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, sliding door, soot filter, traction control, trailer coupling, truck registration, * German vehicle, first owner * Vehicle ID Number: WF0EXXTTRESJ42232 * Next MOT due: [Date] Technical data: * Overall length: 6704 mm * Overall width: 2059 mm * Overall height: 2765 mm * Wheelbase: 3750 mm * Permissible total weight: 3500 kg * Unladen weight: 2411 kg * Payload: 19 kg Load compartment: * Length: 3150 mm * Width: 1750 mm * Height: 2765 mm Special equipment: * Airbag, passenger side * All-weather/all-season tires * Exterior lights, rear top, LED * Floor covering: Vinyl in load/passenger compartment * Driver assistance system: Intelligent acceleration control * Driver assistance system: Lane keeping assist with driver fatigue detection * Parking brake, electric * Cold start package * Load compartment light, LED * Load compartment protection package * Fog lights with static cornering lights * Tire repair kit * Mud flaps, front * Steel rims 6.5x16 * Interior trim in load/passenger compartment: high * Interior trim in load/passenger compartment: Vinyl Standard equipment: * Storage compartment in the roof lining of the driver's cab * Trailer stabilization program (TSA) * Anti-lock braking system (ABS) * Drive type: Rear-wheel drive * Audio system 13: Digital radio reception (DAB/DAB+) with 4'' multifunction display * Exterior mirrors, electrically adjustable and heated * Turn signal integrated in exterior mirror * On-board computer * Entry lights * Electronic brake-force distribution (EBD) * Electronic stability program (ESP) * Electronic traction control * Driver assistance system: Hill start assist * Driver assistance system: Emergency brake assist * Driver assistance system: Crosswind assist * Power windows * FordPass Connect including eCall * 6-speed transmission Bodpfx Abjzx Thijtodg * Rear double doors (opening angle 180 degrees) * Rear double doors without glazing (opening angle 256 degrees) * Heater with recirculation * Body/superstructure: Box van, large-volume, standard * Body variant: High roof * Air conditioning * Automatic climate control * Radiator grille with chrome trim * Steering column (steering wheel) adjustable in height/length * Engine: 2.0 L - 96 kW TDCi CAT * My Key (2nd vehicle key programmable) * Digital radio reception (DAB+) * Wheelbase 3750 mm * Diesel particulate filter * Low emissions according to Euro 6d-TEMP emissions standard * Low emissions according to Euro 6e emissions standard * Gearshift/selector knob, leather * Windshield wipers with intermittent operation, adjustable * Sliding door, load/passenger compartment, right * Mud flaps, rear * Side protection strips * Seat package 18A: Driver's seat (4-way adjustable) - Double passenger seat (2-way adjustable), fabric * Start/Stop system * Daytime running lights * Technology package 2 * Trend * Integrated rear step * Tie-down points (12) * Rollover stability control (RSC) * Heat-reflecting tinted glass * Central locking with remote control * Permissible total weight: 3.50 t * Auxiliary heater, electric Delivery throughout Germany possible!!! Trade-in possible!!! Leasing and financing also possible without a down payment Errors, printing errors and prior sale reserved.

Condition: new, Spare part/conversion kit for industrial Videojet continuous inkjet printers from the 1000 series. The kit includes an umbilical assembly with a printhead, as well as various mounting and connection components. The original Videojet installation/replacement instructions are included. Manufacturer: Videojet Bdsdpfx Aezx Tg Ssbtog Product: Umbilical assembly with printhead Device type: Spare part for continuous inkjet printers Compatibility: Videojet 1000 Line Scope of delivery: Umbilical assembly with printhead, accessories/mounting parts, and instructions as shown in the photos Packaging: Stored in a cardboard box with molded insert Condition: unused / stock item

Condition: used, Year of construction: 2020, functionality: unexamined, Zhengzhou A/X Machinery Sawdust Block Moulding Plant comprising: 3 lines each comprising: Zhengzhou A/X Machinery Line 1 RY-J-2 twin channel 33kw sawdust wood pallet block moulder Fuye 80119 350mm chop saw Senhuan Y-100-2 3kw chop saw Bedpjzx Tg Ejfx Abtjdg

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 240 mm, travel distance Z-axis: 610 mm, controller manufacturer: FANUC, number of axes: 2, Horizontal turning machine manufactured in 1995. This VICTORY VTurn-26 features a Z-axis travel of 610 mm, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the VICTORY VTurn-26 machine we have for sale. Contact us for further details. Technical Specification Bodpfszx Tgxox Abtsdg Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1995, Manufacturer: Mazak Model: Multiplex 420 Year of manufacture: 1995 Bdjdpfszx Tf Ujx Abtjg Control: Mazatrol T32-4 / depending on the version Number of spindles: 2 Number of turrets: 2 Number of tool positions: 12 + 12 = 24 Spindle nose: A2-6 Spindle bore: approx. 61 mm Bar diameter: approx. 51 mm / 2" Spindle speed: up to approx. 4,000 rpm Spindle motor: approx. 25 HP / 18.5 kW per spindle Max. turning diameter: approx. 318 mm Max. diameter over cross slides: approx. 260 mm X-axis: 228 mm Z1-axis: 438 mm Z2-axis: 492 mm Max. distance between spindles: approx. 1,190 mm Tool holder: Modified VDI Turret: 12-position, drum/dodecagonal Machine weight: approx. 8.0–8.2 t

Condition: excellent (used), Year of construction: 2004, Mion Mosole vacuum extraction unit, used. Bsdozx Tf Ispfx Abtsdg

Condition: used, Year of construction: 2020, functionality: unexamined, Zhengzhou A/X Machinery waste wood processing plant comprising: AS-1200 hopper fed 5 ton per hour double shaft pallet shredder magnetic belt cross conveyor 2m 6m incline conveyor 3T Shredder Complete with Y2805-4 75kw drive motor Sawdust 11kw fan blower & cyclone hopper with sawdust collection bin screw elevator conveyor HT Furnace HGJ.3 sawdust dryer 11kw with Nu-wy B55-2H 135-800kw x 182 degC burner 4-vertical column gradual heat transfer chamber drying system 4-zone dryer controls & secondary drive fan 11kw 5m incline conveyor 3m incline conveyor cylindrical glue bin with IBC Weighcell, Greaves spiral mixer agitator 6m incline 4kw motor screw conveyor 2 - 3m horizontal screw conveyor 4m horizontal screw conveyor Bdedpfx Abszx Tfzsteg

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 362 mm, travel distance Z-axis: 2,155 mm, controller manufacturer: FANUC, controller model: 18-T, number of axes: 2, Horizontal turning machine manufactured in 1998. This DAEWOO Puma 350 LMA features a turning length of 2000 mm and a chuck diameter of 320 mm. It is equipped with a live tool and includes a steady rest. If you are looking to get high-quality turning capabilities, consider the DAEWOO Puma 350 LMA machine we have for sale. Contact us for further details. • Turning length: 2000 mm • Chuck size: 320 mm Additional equipment Bdedpfxezx Tfus Abtog • Steady rest included Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, mileage: 1,20,210 km, power: 96 kW (130.52 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 3,050 kg, maximum load weight: 450 kg, overall weight: 3,500 kg, axle configuration: 4x2, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space volume: 16 m³, loading space length: 3,810 mm, loading space width: 2,060 mm, loading space height: 2,150 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Renault Master 130dci with refrigeration - Refrigerated box body - Carrier Xarios 500 refrigeration unit - Deep-freeze capability - Power connection - Portal doors - Tail lift - Side door - Manual transmission - Air conditioning - Cruise control - ABS/ASR/ESP - 3 seats - EURO 6 - Payload: 450 kg - Tires: 225/65R16 - FRCX 11.2027 Bdodpfezx Tfnox Abtsg Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales extend beyond national borders; therefore, you will generally find the export price in our listings, as this is independent of the intended location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be seen as non-binding general information and does not replace detailed individual advice when making a purchasing decision. Only the provisions contained in the purchase agreement are decisive. Subject to change, errors, typos, and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, Quantity: 3 units Industrial continuous inkjet marking system from Markem-Imaje for non-contact labeling and coding of products. Equipped with a 7" touchscreen and a separate printhead. Manufacturer: Markem-Imaje Industries Model: 9232 Device type: Continuous inkjet printer (CIJ) Technology: continuous inkjet printing Year of manufacture: 2014 Printhead: 1 printhead Display: 7" color touchscreen Printing: up to 5 lines Printing speed: up to 6.6 m/s Character height: 1.1–11.4 mm Barcodes: 1D and 2D barcodes possible Housing: Stainless steel Voltage supply: 100–240 V AC, single-phase Frequency: 50–60 Hz Current consumption: 0.5–0.3 A Bdedpfx Aszx Tfhsbtjg Power consumption: 60 VA