Custom Interiors Ltd

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Travel Paths: • X-axis: 6170 mm • Y-axis: 1395 mm • Z-axis: 180 mm Machine Structure: • Gantry design with moving machining unit • 10 consoles (ATS) with adjustable vacuum pods • 30 movable support elements • Multi-zone vacuum system (4 working areas along the X-axis) Installation Dimensions: • Machine length: approx. 8850 mm • Machine width: approx. 4020 mm • Working length: approx. 7300 mm Iodpsyvz Emjfx Abcotd Clamping and Vacuum System: • 2 vacuum pumps each with 90 m³/h capacity • Vacuum modules in various sizes (360° rotatable) • Pneumatic clamping systems: • Front stops • Side stops (left/right) • Central stops • Uniclamp clamping units for workpiece thicknesses 40–98 mm • Sensors for recognising lowered stops Machining Units Main Spindle: • Power: 7.5 kW to 12 kW • Speed: up to 24,000 rpm • Tool holder: HSK F63 Drilling Head: • Vertical spindles: • 10 along X-axis • 10 along Y-axis • Horizontal spindles: • 6 along X • 2 along Y Additional Parameters: • Max. drilling diameter: 35 mm • Usable length: 45 mm • Max. projection: 60 mm Tool Change System Turret Tool Changer: • Capacity: 18 tools • Holder: ISO30 / HSK F63 • Max. tool diameter: 200 mm • Max. tool length: 160 mm Additional: • Pick-up changer with 2 positions • Provision for aggregates (e.g., saw units up to Ø 270 mm) Electrical: • Connection: 400 V / 50 Hz / 3 phase • Power: 22 kW Compressed Air: • Connection: 3/8" • Working pressure: 6 bar • Consumption: approx. 400 NL/min Extraction: • Connection diameter: 250 mm • Air flow requirement: 5300 m³/h • Air velocity: 30 m/s • Pressure loss: 1500 Pa Mechanical Data • Machine weight: approx. 4750 kg Additional Equipment • Automatic central lubrication • Chip conveyor • Air blast device for spindle • Pneumatic pre-installation system • Safety equipment according to Directive 98/37/EC • CNC control (Biesse system)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, X working range: 3280 mm Y working range: 1800 mm Z working range: 180 mm 5-axis electrospindle Vertical drilling heads: 13 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Grooving saw in X direction Tool changer with approx. 16 positions on machine side Tool changer with 12 positions at the rear of the machine Work table with 6 beams Software: bSuite3 Vacuum pump: Becker Picchio 2200, 90 m³/h Safety mats Protective fences Itedpfsyvtp Dex Abcod Available: May 2026

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X working area: 4600 mm Y working area: 1535 mm Z working area: 275 mm 5-axis electrospindle Additional Z-axis support for rear processing units with independent Z-axis Vertical drilling spindles: 29 Horizontal drilling spindles on X-axis: 8 Horizontal drilling spindles on Y-axis: 4 1 grooving saw blade in X direction, diameter 120 mm Chain-type tool changer with 33 positions Pick-up tool changer NC-controlled tool identification system Iodpfsyvkymjx Abcjtd Automatic lubrication system Safety mats XP600 control system, fully PC-based NC-Hops programming system, 1x machine license NC-Hops 7.x Electrical installation, control cabinet, air conditioning Chip conveyor Vacuum system for 1 vacuum pump 250 m³/h

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 0-250-05-3373, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,035 mm, travel distance Y-axis: 1,720 mm, travel distance Z-axis: 380 mm, Equipment: documentation/manual, We are offering this impeccable and ready-to-use Weeke Optimat BHC 550 machining center, year of manufacture 2001. Manufacturer: Weeke Model: Optimat BHC 550 Year: 2001 Condition: ready for operation Category: machining center The machine is connected and in demonstration-ready condition. We recorded a demonstration mode video a few days ago that shows the machine operating error-free. We will be happy to send you this video via WhatsApp upon request. It is equipped with woodWOP 8.0 Version 6.0.71 / 8.0.231.0 (32-bit). Scope of delivery additionally includes: - All required guards and safety fencing - Control cabinet with accessories - BECKER KVT 3.100 vacuum pump - Termo-Tec laser cooling unit Thermochiller 1kW, Type P601-015 Itodpfeyvkygex Abcsd - All documentation, operating manual, circuit diagrams If you have any questions or require further information, please feel free to send us a message or give us a call. All information provided without guarantee.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Isdpfx Aeyvh Dpobcjtd

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,280 mm, travel distance Z-axis: 250 mm, number of spindles: 16, TECHNICAL DETAILS Working area X-axis: 3,300 mm Working area Y-axis: 1,280 mm Working area Z-axis: 250 mm Travel X-axis: 4,000 mm Travel Y-axis: 1,670 mm Travel Z-axis: 500 mm Number of horizontal drilling spindles: 4 pcs. Number of vertical drilling spindles: 12 pcs. MACHINE DETAILS Voltage: 400 V Current consumption: 40 A Power: 18 kW Number of transport packages: 2 EQUIPMENT Documentation CE marking Itedpfx Absyux I Uocsd HSK-F63 tool clamping system Drilling tool Saw unit

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC machining center X working area: 3855 mm Y working area: 1650 mm Z working area: 245 mm 5-axis electrospindle, 13 kW power, HSK63F interface, liquid-cooled 12-position turret tool changer mounted on carriage 16-position tool changer mounted on X carriage Vertical drilling heads: 20 Horizontal drilling heads X: 4 Horizontal drilling heads Y: 4 Saw blade unit for grooving 8-rail worktable Itodpjyuuw Eefx Abcod Software: bSolid Heat exchanger for coolant 250 m3/h vacuum pump Safety photocells Chip conveyor Only 3377 hours of program execution with EPS for automatic positioning of rails and suction cups Suction cups and Uniclamps included Available in July

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 25,000 h, input voltage: 380 V, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 1,250 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 150 mm, workpiece weight (max.): 200 kg, number of axes: 4, number of slots in tool magazine: 20, controller manufacturer: ESA, total height: 2,700 mm, total length: 5,500 mm, total width: 2,700 mm, overall weight: 2,500 kg, table length: 3,050 mm, table width: 1,250 mm, Equipment: CE marking, Well-maintained machining center with extensive equipment. Iedpfxeyurxae Abcstd Milling motor 6.6 kW HSK 63 F 8-position quick-change tool magazine 10-position tool magazine 4th axis Horizontal lock processing unit with two outputs, 4 kW Drilling unit with 12+6 drills Saw along X-axis Laser for vacuum gripper position display Automatic lubrication Remote control

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 23.5 kW (31.95 HP), travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, total length: 6,580 mm, total width: 4,560 mm, overall weight: 6,500 kg, for the production of furniture components made of wood or wood-based materials. Working area Iodsyufd Ajpfx Abcotd X 3250 Y 2025 Z 150 Alternate field processing Pendulum operation Chip conveyor 3250 mm, 1 x right, discharge right Chip conveyor integrated in the machine frame. Discharge direction: right HSK 63 lock case HIGH Performance, 1 x right, 2 spindles For automatic tool change in the main spindle. HSK63 milling unit, 4 spindles, cross-head Flex-5 saw, milling, and drilling unit for tool changer -for automatic tool change in the main spindle -for sawing, milling, or drilling operations

Condition: good (used), Year of construction: 2007, Working area approx. 3600 x 1500 mm X-axis speed: 70 m/min Y-axis speed: 60 m/min Z-axis speed: 15 m/min Electrospindle power: 8.5–13 kW Horizontal drilling spindles: 6–8 Pass-through height approx. 130 mm Z-axis stroke: 240 mm Installed power: 20–30 kW Weight approx. 3,500 kg Required space approx. 7,400 x 3,500 mm Drilling unit: 12 adjustable spindles plus 4 + 2 horizontal spindles Saw Vertical milling unit Interpolating vector axis Horizontal milling unit "TVN" table with six supports, L = 1,500 mm Laser system for suction positions Interpolating vector axis Itedpfxeyt H Imj Abced Vacuum pump NC control system with PC-Office Drill speed adjustable via inverter Exact configuration upon request Details subject to change Price ex works. Assistance with dismantling is possible. (Sale on behalf of customer)

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 252 / 0 - 701, functionality: fully functional, Availability: Immediate - End of March Year of manufacture: 2007 Working area: 3866 x 1260 mm Max. traverse path: X = 3268 mm, Y = 1650 mm, Z = 325 mm Workpiece passage height: 345 mm Max. machining thickness: 175 mm Max. workpiece size for edge routing: 3510 x 1445 x 280 mm Max. traverse speed X-axis/Y-axis: 100 m/min Max. traverse speed Z-axis: 25 m/min Drilling unit motor power: 3 kW Saw unit motor power: 1.5 kW Milling spindle motor power: 9 kW Milling spindle speed: 1000 - 24000 rpm Vacuum pump: 140 m³/h 6 consoles Isdpfeyt Ehlox Abcotd Tool changer: 14 positions Front and rear stop row Crosshair laser for vacuum cup positioning

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Itsdpfx Aeyttf Sjbcod Tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Itjdpfx Absyttcwjcsd Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Iodpfx Aeytr Ryobcetd Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working area X: 3060 mm Working area Y: 1260 mm Working area Z: 150 mm 3-axis electrospindle with 4th axis option 12 kW milling motor with ISO 30 attachment Prepared for use with aggregates 1 ISO 30 aggregate with 2 outputs for horizontal milling 1 Saw aggregate, diameter 215 mm B21L drilling head 10-position revolving tool changer Working table with 6 ATS beams, length 1200 mm 18 supports, 4 loading assistance supports Spindle reaction arm CNC control: XP 600, Biesse Works graphical interface Software: BiesseWorks Advanced Climatized electrical cabinet 1 vacuum pump 90 m3/h Iedpfjytp E Usx Abcetd Safety mats Protection fences 12 suction cups for narrow parts, 12 suction cups 142x136, 6 suction cups 132x75, 6 suction cups 132x54xh48

Condition: used, Year of construction: 2008, machine/vehicle number: 26010808, functionality: fully functional, Used machine Year of manufacture: 2008 Condition: Currently still in production Equipment and Technical Data: CNC Control: Siemens 840 D Maximum travel paths of controlled axes: X = 1800 mm Y = 6590 mm Z = 460 mm A = ± 90 degrees C = ± 270 degrees HSD milling unit with 10 kW, liquid-cooled Continuously variable spindle speed up to 24,000 rpm Lifetime grease lubrication Tool holder HSK 63F 1 multi-spindle drilling unit with pneumatic advance, mounted on the milling unit 16 individually selectable vertical drilling spindles 1 horizontal double drilling spindle in X direction and 1 x the same in Y direction Drill holders each 10 mm diameter Note: Workpieces machined with the drilling unit = 900 mm using X/Y reference spindle Milling unit and drilling unit with 200 mm extraction connections, each equipped with pneumatic shut-off valve, joint connection to customer-side extraction system, diameter 300 mm Tool changer: 1 drum-type tool magazine for 5-axis milling unit, 20 positions for tool diameter 90 mm resp. max. 160 mm with sorted placement, maximum tool length 160 mm One saw blade up to max. 300 mm diameter can be stored and changed; this occupies 3 storage positions Special tool lengths up to max. 180 mm possible with corresponding restriction of working area Maximum tool weight 6 kg (including HSK holder) Total magazine weight approx. 60 kg Magazine positioned at the unit output position Machine table: 8 support beams, manually adjustable along the machine length, each beam with 1 lowerable workpiece stop, fixed facing the operator Table area can be split into two clamping zones, per station: - 1 length stop, pneumatically raisable and lowerable - 2 pneumatically raisable and lowerable sliding rails - 1 vacuum circuit Iedeyr Nwnjpfx Abcjtd Workpiece positioning: 1 Maka laser system Workpiece clamping: 1 vacuum pump 128 m³/h, dry-running, with 250-liter buffer tank 16 vacuum suction cups, 110 mm diameter Vacuum cup kit for stair production incl. touch valve 1 clamping fixture for posts/curved parts Including chip conveyor Including NC-Hops 5, Wop system Including bumper safety device at the front and fencing on the sides and at the rear Central lubrication Rated power: 21 kW Fuse: 63 A Availability: approx. March 2026 Location: Westerwald

Condition: new, max. workpiece length 4500,6000 mm profile spindle 3 Stück main drive 24 kW Control Siemens 840d Working Process Logos Life Evo XS 2345 ----- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. Iodoyrtyyepfx Abcjtd 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe.

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. Isdpfoyq Sztox Abcetd 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: good (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, Equipment: CE marking, documentation/manual, HOMAG Optimat BAZ 722/42/16/K Gantry CNC machine with 2 shuttle tables Options included: Vacuum pumps 2pcs Parts positioning laser. Itodsyq Nkropfx Abced Vacuum pads Scrap parts transporter

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Itjdpfx Absyqzrnjcjd Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Working area X: 4000 mm Itsdpoyprr Nsfx Abced Working area Y: 1600 mm C-axis electrospindle, power 11 kW, HSK 63F interface Vertical drilling heads: 17 Horizontal drilling head with cross position + blade Milling and end-processing unit 360° gluing unit Combined edge trimming/scraper unit Edge band magazine with 2 positions 12-position rotary magazine Control: Power Control PC 85 WoodWop7.1 (update in 2018, paid approx. €9,500) Worktable with 8 beams and suction cups Elmo Rietschle vacuum pump Safety mats Chip conveyer belt

Condition: used, Year of construction: 2018, max. workpiece length 4200 mm profile spindle 1 Stück main drive 15 kW HOMAG CNC Machining Center BMG310/42/F/K, Year of Manufacture 2018 ----- This machine is part of the sale of a complete window manufacturing business, see stock number 1305-6979. Machines still connected and ready for demonstration Technical specifications: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lift rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows For a detailed description, please see the attached PDF document! ----- Iedpfxsyn R Iae Abcetd Price: on request! Options with additional costs: ----- - Used Leitz tools for Homag with curved tooling, compatible with SCM Windor 40 R systems #1305-6993. Price: 12.000 Euro - Barbaric vacuum lifter, manufactured in 2015. Price: 4.500 Euro - used Löwer MZP 1 mini fingerjointing press for arched windows Price: 1.000 Euro (Technical specifications according to the manufacturer, without guarantee!)

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY EUR 130,000!!! This price is valid only until March 21, 2026! Take advantage of this opportunity! We invite you to purchase a NEW and exceptional 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the new SIGMA model, which is exceptionally well-equipped. The machine is completely new, and the attached specification details all functions, parameters, and production capabilities. FANUM has been recognized for years for its reliability, accuracy, high performance, and fast processing speed. Isdpfxsyn Rpws Abcetd The MACHINING CENTER offered is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered to our facility directly by the manufacturer. The FANUM Sp. z o.o. service team only performed initial commissioning and the machine has not been used since. Its condition is as NEW. Our model is extremely well-equipped and offers practically everything required. A comparable new unit currently costs approximately EUR 282,350 net (PLN 1,200,000 net). We maintain direct contact with, and support from, the manufacturer, FANUM Sp. z o.o. An additional commissioning and demonstration can be arranged at our facility. It is also possible to organize transportation to the new owner’s location and to have FANUM's engineers install and start up the machine at the installation site. The proposed price includes the machine itself, but we can also provide an offer with installation and commissioning at the new location. With a discount exceeding 40% (over EUR 117,640 net, approx. PLN 500,000 net) off the new purchase price, this is an extremely attractive opportunity for anyone looking to expand their production fleet with a similar machine or who did not anticipate acquiring a modern, new, and highly efficient MACHINING CENTER within their planned budget. General terms of sale: • Although the machine is NEW, it was manufactured in 2021 and we do not offer any guarantee or warranty; • Returns are not accepted; • The price shown does not include VAT (23% for buyers in Poland), which will be added to the invoice—please check the price in the listing; • Single ownership. * Price in EUR calculated based on NBP exchange rate: 1 EUR = 4.25 PLN. A warm welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery dealer. We own numerous properties in Poland and are a developer of houses and apartments in Warsaw, the capital of Poland. The machines offered for sale are our property, acquired through settlements with tenants from the furniture industry. We are familiar with the machines’ history and condition, verified as per our descriptions. We are in direct contact with manufacturers who can provide additional support—Homag, Otto Martin, OMC Machinery, and FANUM. Since we do not require these machines, our prices are highly attractive, especially given their condition is virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections before purchase are welcome. Best regards.

Condition: used, Year of construction: 2015, machine/vehicle number: AA1/018167, functionality: fully functional, operating hours: 18,050 h, input voltage: 400 V, input current: 59 A, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 3,500 mm, total length: 6,000 mm, total width: 3,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, We are offering this used SCM Tech Z5 machining center for sale. Year of manufacture: 2015. This is a 5-axis CNC machine, currently connected and ready for demonstration. Technical data and features: • Model: SCM Tech Z5 • Type: AA1/018167 • Year: 2015 • Working area: 3,300 × 1,400 × 180 mm • Axes: 5-axis execution • Control/software: Maestro Version 1.00.022.1034 (3D design and milling) • Includes Clemex system Itedpfoynwu Tjx Abcod • Additional licenses: 1× 3D dongle, 2× 2D dongles • Connection: 400 V / 59 A • Vacuum pump: Type Q2EFA132M6C-34 • Tool set with approx. 20 cutters (including diamond cutters, insert, roughing, cove, and rounding cutters) • Additionally, I am offering my Palette CAD, which is connected to the machine, including two licenses (€18,000 net) If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, machine/vehicle number: 008439, X axis working area: 3100 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 8.5 KW Iodpfx Aoyngzcjbcetd Number of controlled axes: 4 axes Total number of tool changer positions: 18