Machining center

HOMAG OPTIMAT BAZ 222 / 60 / K

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Bjdpfxjgwbbqe Ak Hodb Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container Bdedob A Ii Sjpfx Ak Hjb -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14 Bjdpfxswcyacs Ak Hjdb

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Bdsdpfx Aksifnxxe Hjb Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER Bdsdpfx Aex Aqi Eek Heb N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 01/40360/1117, input voltage: 230 V, measuring range X-axis: 2,750 mm, measuring range Y-axis: 1,250 mm, measuring range Z-axis: 85 mm, overall weight: 2,600 kg, Measuring range: 2,750 x 1,250 mm Factory-refurbished measuring table SN 01/40360/1117 (year of manufacture: 2017) – Subject to prior sale - Operating system: Windows 10 For measuring external dimensions and one-sided inspection of vertical and horizontal boreholes in panel-type workpieces. APPLICATION AREA: Setup assistance: Measurement of first-off sample parts Random inspection: Measurement of sample pieces MEASUREMENT CRITERIA: Dimensions: Length, width, angles Borehole, vertical: Position, diameter, depth, borehole distances Borehole, horizontal: Position, diameter, depth, distance to the panel surface (NOTE: Test pins or inserted dowels are required) Groove: Edge distance, width, depth Radius: Center position, radius Rebate: Width, depth Cutouts: Width, edge distance Technical data: Workpiece length (X-axis) min./max.: 180 mm – 2,750 mm Workpiece width (Y-axis) min./max.: 50 mm – 1,250 mm (Note: Measurement of vertical and/or horizontal boreholes as well as grooves and rebates on the Y-axis is possible up to 1,150 mm position) Workpiece thickness (Z-axis) min./max.: 5 mm – 85 mm NOTE: Other sizes available on request. Accuracy: +/-0.1 mm Resolution: 0.01 mm (NOTE: Consistent lighting conditions are required to maintain accuracy – independent of daylight) Measuring surface: High-precision, ground granite plate 3,200 x 1,340 x 150 mm Working height above floor level: approx. 1,000 mm +/- 50 mm Required space (L/W/H): approx. 5,000 mm/ 2,000 mm/ 1,700 mm Bdodpfxsw Ev N Ss Ak Hob Weight approx.: 2,400 kg + control cabinet including operator panel approx. 200 kg Total electrical connected load: 2,500 W Compressed air connection: 6 bar Operator side: left Operating voltage: 230V/16A (CEE7/7) Network connection: RJ45 Ambient temperature: max. 35 degrees Celsius (NOTE: For higher temperatures, a climate control unit in the control cabinet is recommended – available as an option.) Technical changes reserved. The above performance data assume suitable workpieces are used. Scope of delivery: ⦁ Automatic measuring table with 2-axis servo drive ⦁ Automatic camera height positioning ⦁ 1 x CAD4U software license and HECHT interface for measurement program creation on a PC in work preparation ⦁ 19” PC with CAD4U software license and interface for measurement program creation, current software version Results and Driver for program execution, image processing software ⦁ Camera, lens, and lighting for image capture ⦁ Operating system: Windows Ultimate 64-bit ⦁ Rittal PC cabinet 600x1600x650 mm (W x H x D) ⦁ Test pins for measuring lateral boreholes: 10 pcs each with a diameter of 5, 6, 8 mm ⦁ 4 x corner angles for black parts ⦁ SQL Express database installed on the machine PC Languages: The operator software is available in the following languages: German, English, French, Italian, Spanish, Flemish, Polish, Lithuanian, Russian, and Chinese. Additional languages available on request. SAFETY AND PROTECTION DEVICES Emergency stop switch unit All machines for EU member countries with CE marking according to EC Machinery Directive 2006/42/EC Technical documentation stored on PC The measuring table must be fully enclosed with a safety fence. This and other safety devices are not included in the delivery.

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Bsdpfx Akovxhnue Hodb Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 0-201-22-3325, functionality: fully functional, workpiece length (max.): 5,800 mm, workpiece width (max.): 1,200 mm, controller model: Homatic-CNC System PC83 mit Windows NT 4.0, feed rate X-axis: 80 m/min, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on 20/03/2026! 4-axis CNC machining center for drilling, milling, edge banding, and finishing: - Saw and crosscutting unit for tool changer - Drilling and milling unit (4 spindles) for tool changer - Combination flush-trimming and finishing unit for tool changer - Blow-off nozzle for workpiece edge, compatible with tool changer Attention: Except for the units listed above, no vacuum suction cups, tools, or tool holders (even if visible in images) are included in the scope of delivery! TECHNICAL DETAILS Console clamping table "K": 12 adjustable consoles for holding vacuum cups with longitudinal and lateral stops, 4-fold occupancy - Max. workpiece length (single occupancy): 5,800 mm - Max. workpiece length (pendulum mode): 2,200 mm - Max. workpiece width: 1,200 mm - Max. workpiece thickness (using standard 100mm-high cups) with edge: 60 mm (if extraction hood is in position 1) - Max. workpiece thickness (using standard 100mm-high cups) without edge: 60 mm - Max. workpiece thickness (using standard 100mm-high cups) without edge: 120 mm (if extraction hood is in position 2) Support equipment - Drilling head: 17 vertical spindles - 2x main spindle 12 kW, water-cooled, for HSK (speed 18,000 rpm with C-axis and 12-position carousel tool changer) - Separate Y-axis for second main spindle and interface for aggregates with integrated pneumatic and electrical connections - Electronic supply and swivel drive - C-axis: swivel range without limitation Edge banding unit, 360°, for insertion into right main spindle - Max. edge height: 65 mm - Pickup station right, for depositing edge banding modules - Pre-cutting station and 3-position roller magazine Adapter units - Combination flush-/radius trimming and finishing unit (profile scraper knife) - Saw and crosscutting unit Bdjdpfx Asyic Tuok Heb - 4-spindle drilling/milling unit (crosshead) - Blow-off nozzle for workpiece edge MACHINE DETAILS - Control: HOMATIC control PC 83 with Windows interface (NT 4.0) EQUIPMENT - WOODWOP programming system, version 5.0 - Network connection - Laser positioning aid - Chip conveyor - Safety: pressure-sensitive floor mats at front, side safety cage; rear: wall installation Note: A loading aid can be provided for a deposit of €5,000. Upon return, the deposit will be refunded minus 10%.