Used Elumatec Kf 178 for sale (134)

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Voltage: 230/400 V Bsdpfey D I R Sex Albjlp Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg Bjdpfx Aezy Staslbslp The machine is in perfect working order We can ship the machine to your address (On demand)

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Bsdpfx Aezwl R Tslbjlp Weight: about 350 kg

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: Bedpfxozxc Sws Albjlp - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Bledpezcz Dnefx Albsp Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Condition: used, Year of construction: 1988, A twin-spindle copy milling machine is offered for sale. Equipped with pneumatic clamping elements and a copying attachment. Inspection possible by arrangement. Bljdpfx Aj Aga Hzjlbop

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 Bljdpfoy Sxr Nox Albsp used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 EU shipping - 350 euro Bledpfx Ajvi R Avolbsp

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Bsdpfx Aleyxnx Sebslp Travel: 120 mm

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. Blsdsziy Idopfx Albsp The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Year of construction: 2013, operating hours: 6,044 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040693, CNC-profielbewerkingsmachine met 4 assen: - Bouwjaar 2013 Bsdpfoz Eqxcsx Albolp - Draaiuren: 6.044 uur - Bewerkingslengte: 7,6 m - Gereedschapsset De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine komt beschikbaar begin decemeber 2026.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1424140083, Elumatec sawing machine SAS 142/141 with dust extraction system Year of manufacture: 2008 Cutting accuracy: 0.5-0.6 mm Dust extraction system: Year of manufacture: 2008 Blodpfx Asz Rpgwelbep For sale only to dealers and commercial businesses. Due to the age and operating hours, no guarantee or warranty is provided.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2440099152, Elumatec DG 244 Twee-kopszaagmachine - Bouwjaar 2012 - In goed werkende staat De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Blodpfxsz Eqygo Albep Machine is beschikbaar begin december 2026.

Year of construction: 2018, operating hours: 5,750 h, condition: used, functionality: fully functional, overall weight: 3,800 kg, total length: 7,650 mm, total width: 2,180 mm, total height: 3,000 mm, milling spindle speed (max.): 20,000 rpm, number of spindles: 1, type of cooling: water, machine/vehicle number: 1220099569, operating hours of spindle: 5,720 h, number of slots in tool magazine: 12, number of axes: 5, Elumatec SBZ 122/75, a 5-axis machining center for aluminum profiles. Due to a change in production to a tube laser system, we are selling our fully functional Elumatec SBZ 122/75. Service was performed by Elumatec in March 2026 (see attached maintenance report), and we have not used the machine since then. Interested parties are welcome to view and test the machine at any time. Special equipment (see also the attached invoice): - Length measurement on both sides - 2 additional, automatically positionable material clamps - 1 additional material stop on the right side, allowing for the processing of oversized lengths - Control cabinet cooling Technical data (see also the attached brochure): - X-axis travel: 4176mm - Y-axis travel: 1040mm - Z-axis travel: 540mm - A-axis swivel angle: -120° to +120° freely programmable - C-axis swivel angle: -220° to +220° freely programmable - Max. machining length without end-face machining: 3851mm - Max. machining length with end-face machining: 3525mm - Tool changer with 12 positions - Saw blade diameter: 180mm - 6 material clamps - Tool holder: HSKF63 - Spindle power: 7kW / 20000 rpm, water-cooled - 2-layer machining - Minimum quantity lubrication Blodpozz Tbhjfx Albjp - Central lubrication This very fast and agile machine with a 5-axis head leaves nothing to be desired. The machine is available immediately. Space requirements can be found in the layout in the appendix. You can also find the transport instructions in the appendix; please contact us if you have any questions. Dismantling, loading and transport should preferably be organized by the buyer due to the subsequent reassembly. Various auxiliary tools can be made available upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief; however, no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy or similar. Subject to prior sale.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 1510051228, Fully functional CNC machine from 2010. Viewing is possible to see the machine in operation. The buyer is fully responsible for dismantling and transporting the machine to their location. More information: 5-axis profile machining center Blsdpjz Aki Eefx Albjp Designed for flexible and efficient aluminum machining Autonomous clamping positioning Maximum working length: 7000 mm; 12 pneumatic clamps, also operable via a 2-station setup (2 x 3500 mm) Tool magazine with capacity for 20 tools, a 500 mm saw blade, and an angle head.

Year of construction: 2018, operating hours: 3,380 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040950, 4-assige CNC-profielbewerkingsmachine: - Bouwjaar 2018 - Draaiuren 3.380 uur Blsdsz Eqpnopfx Albop - Windows 10 operating system - Werklengte 7,6m - Lengtemeetsysteem profielen - Barcodescanner - Toolset Machine is werkend te zien, demontage door koper. Per direct beschikbaar.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 1510051180, Fully functional CNC machine from 2008. Viewing is possible to see the machine in operation. The buyer is entirely responsible for dismantling and transporting the machine to their location. Bedez Akh Uspfx Albelp More information: 5-axis profiling machining center Designed for flexible and efficient aluminum machining Autonomous clamping positioning Maximum working length: 2 stations of 7000 mm; 10 pneumatic clamps per workstation Tool magazine with a capacity for 20 tools, a 500 mm saw blade, and an angle head.

Condition: used, Year of construction: 2015, operating hours: 19,517 h, functionality: fully functional, machine/vehicle number: 1220099199, Elumatec SBZ 122/64 CNC machining centre for aluminium and PVC profiles. Made in Germany, 12/2015. Fully functional, currently in production. Inspection under power on site or via live video. Spindle: 22,000 rpm Power: 21 kW, 400 V, 50/60 Hz Air: 7 bar Bsdpfoz Ruzgex Albslp Machine hours: approx. 19,500 h Spindle hours: approx. 4,390 h Pneumatic clamps, safety light barriers

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, total length: 4,500 mm, overall weight: 1,500 kg, Fully refurbished Elumatec DG 142 twin-head saw with E550. New blades have been installed, and all bearings and wear parts have been replaced. All pneumatic hoses and pneumatic system components have been replaced. The machine comes with a fixed dust extraction unit, 1.5-meter rollers on the moving head, and a sliding profile holder. Blodoz Smc Tepfx Albop Additional options for the machine include: a short-measure stop, a printer, adjustable mitre angles from 45 to 90 degrees, and E111 on both heads.

Year of construction: 2007, condition: used, functionality: fully functional, Complete set of machines for the production of PVC joinery – sold ONLY AS A WHOLE. The set includes the following machines: - CLEANING MACHINE Elumatec EV 834/01 (8340120611 - 11/2007) - MILLING MACHINE Elumatec GF 171/00 (1710821408 - 08/2008) Bsdpfxezxdf Es Albelp - MACHINE FOR CUTTING GLASS HOLDERS PERTICI BS771 (05V150 - 2005) - WELDING MACHINE Elumatec ZS 720/00 (7200020800 - 12/2004) All machines are in good condition and fully functional. An industrial vacuum cleaner for PVC chips is also included as a bonus with these machines.

Year of construction: 2010, operating hours: 11,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12222321222, Equipment: type plate available, Elumatec SBZ122/33 profile machining center, year 2010 Technical data: Working area: X - 3850 mm, Y - 350 mm, Z - 280 mm Electrospindle 10 kW - max. 20,000 rpm (overhauled in 2023) (RF-HSK-F63 125/125x430 24/6.5) Tool holder HSK-63 F Tool changer Work table with 4 clamps with automatic positioning Pneumatic clamping operation Photoelectric safety barrier Operator handheld terminal Control panel workstation USB connection Operating software: Windows 7 system Production software: EluSoft, EluCAM Numerical control: Ferrocontrol Protective fencing with doors (laser safety barrier) Automatic and central lubrication of linear guides Weight: 1,940 kg Total connected load: approx. 14 kW Machine dimensions: 4,670 x 2,000 x 2,540 mm Required space: 5,165 x 3,000 x 2,540 mm Bljdpew Rv A Ujfx Albop Machine used for aluminum profile processing. Serviced and ready for operation.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1045331039, Elumatec DG 104 Twee-kopszaagmachine Blsdpfxoz Eqxvs Albsp - bouwjaar 2006 - in goed werkende staat De machine kan ter plaatse in werking worden getoond; demontage is voor rekening van de koper. Machine beschikbaar begin december 2026.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg Bjdpozxc Rmofx Albjlp For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1613030303, Saw blade diameter 280 mm Saw blade speed 3,200 rpm Bsdpfxez S Nayj Albjlp Power supply 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg Accuracy is achieved by cutting from below Wide pivoting range of up to 0° to the right and up to 45° to the left The special pivoting mechanism with integrated turn table enables working from the front at any angle position The workpiece stop is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles Manual material clamping unit (vertical) Machine is ready for operation, saw blade was sharpened

Condition: used, Year of construction: 2006, functionality: fully functional, saw blade diameter: 380 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,550 mm, saw blade speed: 2,800 rpm, overall weight: 280 kg, For sale is an elumatec SA 73/35 sawing machine, manufactured in June 2006. Bsdsz D Ahmopfx Albslp The machine is suitable for the automatic cutting of aluminum.