Used Hollow Spindle Lathe for sale (14,961)

Condition: excellent (used), Year of construction: 2013, operating hours: 1,719 h, functionality: fully functional, feed length X-axis: 470 mm, feed length Z-axis: 2,040 mm, feed rate X-axis: 5 m/min, feed rate Z-axis: 10 m/min, turning diameter over cross slide: 650 mm, turning diameter: 1,030 mm, spindle bore: 375 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 5 rpm, overall weight: 23,000 kg, Okuma CNC Oil Country Hollow Spindle Lathe Codpfx Asxzgkieddehf Model: LOC 650 Control: Okuma OSP P300L Year: 2013 Max Swing Over Bed: 1030mm Max Turning Dia: 650mm Spindle Bore: 375mm Spindle Speeds: 5-500 RPM Double Air Chucks 850mm Dia 12 Station Upper Turret Swarf Conveyor Coolant System

Condition: good (used), Year of construction: 1977, spindle bore: 360 mm, turning length: 2,000 mm, Oil Country Lathe Ø 970 x 2000 mm Chedpfxoxf E Rce Addjf Double Hydraulic chuck Double chuck front and rear with 360 bore API Threading Cutter attachment Safety cover dfor front and rear chuck Conical turning carriage Multi fix tool system DBC Turning Length: 2000mm Swing over bed Ø: 970mm Swing over cross slide Ø:500mm Spindle bore: 360mm Spindle power: 22kW Stroke pinole: 360mm Spindle taper: 6Mk Speeds / ranges: 28-500Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 2000mm/min. Length: 5500mm Width: 1900mm Height: 1900mm Weight: 10600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: Lehmann electrol 5035, turning diameter over cross slide: 914 mm, turning diameter: 914 mm, center height: 647 mm, turning diameter over top slide: 914 mm, spindle bore: 409 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, turning diameter over bed slide: 1,295 mm, overall weight: 18,636 kg, swing diameter over cross slide: 914 mm, total height: 2,100 mm, total length: 5,500 mm, total width: 2,320 mm, air pressure: 7 bar, distance between centers: 2,844 mm, 16 1/8" Lehmann Hollow spindle Oil country Manual Lathe machine 5035 with attachments Semi-automatic threading system ,Taper Attachment,front & rear Chucks 36” 4-jaw, 16 ¼ hole Chsdpfxetp T Aze Addof Swing Over Bed Ways 51” - Swing Over Cross Slide 36” - Distance Between Centers 112” - Motor 75 HP 500 RPM Model: Lehmann electrol 5035 Serial No: 501616-010 input voltage : 3 phase -380 - 460 V Manufacturer : Lehmann -USA Manufacturing date : 1982 Weight: 41,000 lbs.

Condition: good (used), travel distance X-axis: 798 mm, travel distance Z-axis: 358 mm, Chip conveyor  SMW Front and Rear chuck 700 mm  Double revolver 6+8 positions Big Bore 360 mm Tailstock with power quill Tooling package included with inserts and jaws Max. turning Ø:665mm X-Axis: 798mm Z-Axis: 358mm Csdpfx Ajwxb Ersddohf Spindle bore: 360mm Speedrange: 500Rpm Spindle power: 45kW Pinole taper: 6Mk Stroke pinole: 230mm Quill Ø: 150mm Length: 8100mm Width: 275mm Height: 2100mm Weight: 13000kg

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t Chsdpfx Aox A R Sgeddof

Condition: ready for operation (used), functionality: fully functional, Machine has drilling / threading unit fitted on Chodpfx Asxz R Ileddof It is included barfeeder.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Weiler Praktikant GSD Precision Lead and Feed Screw Lathe with 3-Axis Heidenhain ND 780 Digital Readout, As-New Condition, Year of Manufacture: 2017 Technical Data: - Year of manufacture: 2017, Machine No. MK10 - Center height: 160 mm - Swing over bed: 320 mm - Swing over cross slide: 190 mm - Distance between centers: 650 mm - Spindle speeds: 16 steps, from 48 to 2500 rpm - Spindle bore: 43 mm - Short taper spindle nose: DIN 55027 size 5 with bayonet lock Codpfx Ajx Aiycsddshf - Tailstock: Morse Taper 3 - Longitudinal feeds: from 0.02 to 0.63 mm/rev - Cross feeds: from 0.006 to 0.2 mm/rev - Thread cutting: metric, inch, module, and diametral pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 1,050 kg - Spindle brake - Dimensions: approx. 1.72 m length, 1.7 m height, 0.89 m depth Accessories and Features: - Heidenhain ND780 digital readout - New collet chuck set, NEW collets from 3 to 26 mm - Schunk 160 mm 3-jaw chuck with 1 set of reversible jaws (wedge bar system) - Multifix size A with 3 tool holders - 1 bed stop - Splash guard - Coolant system - Machine lamp - Operating manual, spare parts diagram Safety Features: - Lockable main switch - Emergency-stop push button - Electrically monitored chuck guard - Automatic disengagement of the respective handwheel when feed is engaged About the Machine: Offered is a Weiler Praktikant GSD Precision Lead and Feed Screw Lathe with a 3-axis digital readout ND780. Year of manufacture: 2017, in as-new condition with original paint finish. The machine is, of course, fully functional and is supplied with a new set of collets. Previously used in a government facility and only rarely operated. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Condition: good (used), WEILER Commodor B Lathe Year of manufacture: 1987 with HEIDENHAIN 3-axis digital readout Centre height: 190 mm Centre distance: 950 mm Swing diameter over cross slide: 190 mm Spindle bore: 56 mm Spindle speeds: 25–2,000 rpm Number of speed steps: 18 Motor power: 2/4 kW Longitudinal feeds: 0.022–0.8 mm/rev Cross feeds: 0.011–0.4 mm/rev Number of feeds: 200 Metric thread pitches: 0.3–10 mm Weight: approx. 1,500 kg Dimensions: 2,350 x 1,000 x 1,450 mm Technical data subject to change! This machine is ideal for users who require a large spindle bore. Accessories/Equipment: - HEIDENHAIN 3-axis digital readout - Independently adjustable faceplate - Electrically interlocked chuck guard - Multifix toolpost size "B" - Machine lamp Chedpfexz Rc Nsx Addsf - Coolant system - Rear chip guard - 2 emergency stop buttons - Bed stop - Additional accessories as available (drill chuck, rotating centres, tool holder cassettes, etc.) Available from March 2026 from vocational training centre Condition: good to very good

Condition: good (used), Year of construction: 1970, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 68 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 9 rpm, power: 11 kW (14.96 HP), Tailstock holder MK5 Chuck Steel holder Chsdpfx Ador Ikq Todjf Weight 3500kg Loading and delivery is no problem

Condition: excellent (used), Year of construction: 1995, Digital display Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Chsdpewhrg Sefx Addjf Tailstock

Condition: good (used), Year of construction: 1980, Center height: 130 mm Swing over bed: 260 mm Swing over cross slide: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 Size 5 Drehdurchmesser über Support: 140 mm (repeated, omitted for English) Spindle speed range: 35.5 - 3150 rpm Feed range, longitudinal: 0.04 – 0.4 mm/rev Feed range, cross: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 - 36 pitch Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2140 x 850 x 1400 mm Weight: 1100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change toolpost system “Multifix” Size B • Coolant system with chip guard • Chuck guard • Hardened bedways Chsdpfx Adoxz Rfkedsf • Lighting • Bed stop • Emergency stop switch New brake linings and gearbox newly mounted Delivery time: approx. 2-3 weeks Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm Codopq R Rdepfx Addjhf - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW Cjdpfx Adoxziuwodohf The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: excellent (used), Weiler Ergodor lathe Max. Turning diameter over bed: approx. 320 mm Max. Turning diameter over support: approx. 160 mm Max. Turning length: approx. 470 mm Bar passage: approx. 36 mm Spindle: Speed range: approx. 30 - 3550 rpm Spindle nose: A 2 - 5 Drive power: approx. 3.0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.020 - 2.0 mm/rev Csdpfx Asq Ixxyjddjhf Suitable for threads: - metric 0.20 - 12 mm Inch 80 - 2 Gg/ Diametral - Pitch thread 160 - 5.5 Dp Module 0.1 - 4

Condition: excellent (used), EMCO Precision Lathe EMCOMAT 17 D Including 3-axis EMCO digital readout Year of manufacture: 2007 with CE mark 2 units available! Centre distance: 700 mm Centre height: 170 mm Swing over bed: Ø 340 mm Swing over cross slide: Ø 190 mm Bed width: 260 mm Longitudinal slide travel: 600 mm Cross slide travel: 220 mm Compound slide travel: 110 mm Compound slide length: 410 mm Compound slide width: 150 mm Bed slide guide length: 380 mm Tool section: 20 x 20 mm Distance spindle centre – compound slide: 34 mm Compound slide (support) swivel range: 60 / 120° Main spindle: Spindle mount: DIN 55029 (Camlock) Spindle bore: Ø 50 mm Internal taper to DIN 7178 1:22 Spindle diameter at front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40 - 3,000 rpm Infinitely variable speed adjustment Mechanical speed ranges: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Chsdpfx Adsxx S R Aedef Feed: 20 (28) longitudinal feeds Z: 0.045–0.787 mm/rev 20 (28) cross feeds X: 0.023–0.406 mm/rev Threads: 20 (28) metric threads (basic equipment): 0.4 – 7.0 mm Tailstock: Quill diameter: Ø 50 mm Quill internal taper: MT 3 Quill stroke: 120 mm Lateral offset: ±13 mm Permissible workpiece weight (between centers, unsupported): 50 kg, supported with tailstock: 150 kg Weight: 755 kg Dimensions: 1650 x 1060 x 1635 mm The EMCOMAT 17 D is a precision lathe suitable for all areas of mechanical engineering and training purposes. Equipment: - EMCO 3-axis digital display with color screen - Potentiometer - Emergency stop button - Digital speed display on control panel next to digital readout - 3-jaw chuck - MULTIFIX tool post, size B - Electrically interlocked chuck guard - Quick-action collet chuck - MICROJET coolant spray unit - Chip guard rear panel - Machine lamp - Machine feet - Bed stop Condition: Very good, from training facility Available from March 2026

Condition: excellent (used), Year of construction: 2006, Centre height: 160 mm Centre distance: 650 mm Spindle speed: 2,500 min-1 Multifix Tailstock Chodpew Sn Irjfx Addef Accessories

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.4450mm Width/depth (product): approx.1150mm Height (product): approx.1650mm Weight (net): approx.3000kg Working ranges: Center height: 280mm Center width: 2910mm Circumferential diameter over machine bed: 560mm Circumferential diameter in the bed bridge: 790mm Swing diameter over cross slide: 355mm Turning length in the bed bridge: 170mm Bed width: 350mm Speed range: Number of speed ranges: 12 Speed range: 25 - 1600min¯¹ Electrical data: Csdpfjq Ukc Rox Addjhf Drive motor power: 7.5kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar passage diameter: 80mm Steel holder mounting height: max.25mm Spindle cone: MK 7 Tailstock: Tailstock holder: MK 5 Tailstock quill stroke: 180mm Tailstock quill diameter: 75mm Pitch: Pitch metric: 0.2 - 14mm/rev Number of leads metric: 47 Pitch inch: 112 - 2Gg/1" Number of pitches inch: 60 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches: 34 Travel distance: Top slide travel: 130mm Travel of face slide: 316mm Bed slide travel: 2710mm Feed rate: Feed range longitudinal: 0.059 - 1.646mm/rev Number of longitudinal feeds: 35 Feed range flat: 0.020 - 0.573mm/rev Number of feeds flat: 35 Electrical connection: Total connected load: 8.5kW

Condition: ready for operation (used), functionality: fully functional, Centre distance: 750 mm Swing over bed: 430 mm Spindle bore: 42 mm 24 speeds: 14 – 1400 rpm Drive power: 5.5 HP Cjdpsx Dm Sxefx Addshf Weight approx.: 2 t Accessories: steadies, Multifix, Forkardt chuck Condition: The machine runs well; the longitudinal guide is no longer in good condition. The machine is low-priced and only suitable for simple tasks.

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout Chodjxyh Ndopfx Addof - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: good (used), Year of construction: 1996, Weiler lathe Type Condor B Center height 165 mm Center width 750 mm Rotation over bed 330 mm Rotation over cross slide 185 mm Spindle head DIN 55027 size 5 Spindle bore 40 mm Inner taper main spindle MK 5 Connected load 3 kw Speed 22-2800 rpm Tailstock MK 3 Cjdpfx Adevbwd Rodohf Weight 1040 kg 3 jaw lathe chuck 4 jaw lathe chuck Multifix B Rotating center punch

Condition: good (used), WEILER Precision Lathe MADADOR with HEIDENHAIN 3-Axis Digital Readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Centre distance: 500 mm Swing diameter over cross slide: 160 mm Spindle nose: DIN 55022 size 5 Spindle bore: 36 mm Spindle speeds: 30 – 3,000 rpm Motor power: approx. 3.0 kW Tailstock quill: MK 3 Quill travel: 90 mm Weight: approx. 620 kg Dimensions: 1420 x 700 x 1200 mm Technical data not binding! Robust lead and feed screw lathe for workshops and advanced DIY users Condition: good Equipment: - 3-axis precision digital readout HEIDENHAIN Cedpfxexx S Hdj Addehf - Lever-operated quick-collet chuck system - Electrically interlocked chuck guard - Multifix tool post size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard/rear splash guard - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slide Safety features: - Electrically interlocked chuck guard - Emergency stop button - Brake motor Available from March 2026

Condition: new, Year of construction: 2025, For current prices and delivery times, please contact us. Dimensions and weights: Length (product): approx.3265mm Width/depth (product): approx.1065mm Height (product): approx.1550mm Weight (net): approx.1965kg Working ranges: Center height: 230mm Center width: 2060mm Circumferential diameter over machine bed: 460mm Circumferential diameter in the bed bridge: 690mm Swing diameter over cross slide: 270mm Turning length in the bed bridge: 240mm Bed width: 300mm Speed range: Number of speed ranges: 12 Speed range: 25 - 2000min¯¹ Electrical data: Power drive motor5.5kW Supply voltage400V Mains frequency50Hz Cooling lubricant system Cooling lubricant system Coolant pump output: 125W Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar passage diameter: 58mm Steel holder max. mounting height: 25mm Spindle cone: MK 6 Tailstock: Tailstock holder: MK 4 Tailstock quill stroke: 130mm Tailstock quill diameter: 60mm Pitch: Pitch metric:0.1 - 14mm/rev Number of leads metric: 41 Pitch inch: 112 - 2Gg/1" Number of pitches inch:41 Pitch Diametral Pitch: 4 - 112DPI Number of pitches Diametral Pitch: 50 Module thread pitch: 0.1 - 7mm/rev Number of module thread pitches:34 Travel distance: Top slide travel: 125mm Travel of face slide: 285mm Bed slide travel: 1805mm Cedpfjq Ukbpsx Addehf Feed rate: Feed range longitudinal: 0.031 - 1.7mm/rev Number of longitudinal feeds: 42 Feed range flat: 0.014 - 0.784mm/rev Number of feeds flat: 42 Electrical connection: Total connected load: 5.8kW

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1760mm Width/depth (product): approx.745mm Height (product): approx.1320mm Weight (net): approx.469kg Max. height (product): approx.1590 (DPA)mm Working ranges: Center height: 165mm Center width: 1000mm Rotation diameter over machine bed: 330mm Swing diameter over cross slide: 216mm Bed width: 190mm Speed range: Number of speed ranges: 9 steps Speed range: 65 - 2000min¯¹ Electrical data: Drive motor power: 1.5kW Supply voltage: 400V Mains frequency: 50Hz Spindle: Spindle holder: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: Diameter 38mm Steel holder max. mounting height: 16mm Chjdpfxeq T R Aae Addjf Spindle cone: MK 5 Tailstock: Tailstock holder:MK 3 Tailstock quill stroke: 100mm Tailstock quill diameter: 38mm Pitch: Pitch metric: 0.4 - 10mm/rev Number of leads metric: 29 Pitch inch: 56 - 4Gg/1" Travel distance: Top slide travel: 90mm Travel of face slide: 168mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.02 - 0.4mm/rev Number of longitudinal feeds: 24 Feed range flat: 0.01 - 0.2mm/rev Number of feeds flat: 32

Condition: new, Year of construction: 2024, For delivery times and current prices, please contact us directly. Dimensions and weights: Length (product): approx.1935mm Width/depth (product): approx.780mm Height (product): approx.1740mm Weight (net): approx.765kg Working ranges: Center height: 200mm Center width: 1000mm Rotation diameter over machine bed: 400mm Swing diameter over cross slide: 250mm Speed range: Number of speed ranges: 8 Speed range: 70 - 2000min¯¹ Electrical data: Drive motor power: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Cooling lubricant system: Cooling lubricant system Coolant pump power: 100W Spindle: Steel holder: SWH 3-E Spindle holder: Camlock DIN ISO 702-2 No.5 Spindle bore/bar passage diameter: 53mm Spindle cone: MK 6 Tailstock: Tailstock mount:MK 4 Tailstock quill stroke: 110mm Pitch: Pitch metric: 0.4 - 7mm/rev Number of leads metric: 32 Pitch inch: 56 - 4Gg/1" Number of pitches inch: 31 Travel distance: Top slide travel: 98mm Travel distance face carriage: 185mm Bed slide travel: 850mm Feed rate: Feed range longitudinal:0.014 - 0.38mm/rev Cjdpfeq T R Dmjx Addohf Number of longitudinal feeds: 26 Feed range flat: 0.052 - 1.392mm/rev Number of feeds flat: 32 Tool clamping: Tool holder Holder size: 16mm Electrical connection: Total connected load: 3.0kW

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Condition: New machine Center height: 200 mm Center width: 1,000 mm Spindle speed: 70 - 2,000 rpm (8 steps) Chsdpfx Adsq Ui Tdjdef Equipped as standard with - 3-axis digital readout DPA 21 - Machine base - 200 mm three-jaw chuck - LED machine light - Reducing sleeve MK 4/MK 6 - Fixed center point MK 4 - Steady rest, fixed - Steady rest, moving - Quick-change steel holder Basic body E - Torsion steel holder ED - Chuck protection cover, electrically fused - Oil filling - Operating tool - Operating instructions