Used Manual Lathe for sale (19,623)

Condition: used, Year of construction: 2024, XYZ 1530VS x 730mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11388443 (2024) Location: These lots are located in Rhayader, Wales, UK. Duolhcezgfb Rodwvew

Condition: used, Year of construction: 2024, XYZ 1550VS x 1230mm Gap Bed Manual Lathe with DRO, Swing Over Bed 390mm, Swing in Gap 610mm, Spindle Speed 20-2500rpm, Spindle Bore 54mm, Tailstock. Serial No. 11308450 (2024) Delhjzgdz Ascdwvsuw Location: These lots are located in Rhayader, Wales, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, L + Z Lathe WEILER Model Praktikant 800R Machine No. 3309 Year of manufacture: 1984 Centers distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and cross Chuck mounting: Short taper DIN 55027 size 5, 4x M10 Tailstock taper: MT 3 Tailstock quill travel: 90 mm Spindle speed: 42 – 2000 rpm Drive power: 1 / 1.6 kW Djlhcdwjyg Rfijvouw Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gear steps - 3-jaw scroll chuck BILSING Ø 160 mm with 1 set of stepped jaws and 1 set of soft jaws - MULTIFIX quick-change toolpost size A with 3 exchangeable toolholders - Live center - Emergency stop - Folding chuck guard - Coolant system - Operating manual with electrical schematic - Very low operating hours Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 600 kg Very good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2581 Year of manufacture: 1984 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-step gearbox - 3-jaw scroll chuck AROWA Ø 200 mm (only one set of chuck jaws) - Multifix quick-change tool post, size B, with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop - Splash guard - Fixed steady rest Ø 160 mm - Machine lamp - Operating manual Delhcoyah Rvodwvsuw Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1500 kg In very good condition

Condition: used, L + Z Lathe WEILER Type Praktikant 800R Machine No. 3315 Year of manufacture: 1984 Center distance: 800 mm Swing over bed: 280 mm Swing over cross slide: 160 mm Center height over bed: 140 mm Duslhcdsyr R Dcowvow Center height over cross slide: 80 mm Spindle bore: 36 mm Feeds: longitudinal and face Chuck mount: short taper DIN 55027 size 5, 4x M10 Tailstock taper: MK 3 Quill travel: 90 mm Spindle speed: 42 - 2000 rpm Drive power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 8 gearbox steps - 3-jaw scroll chuck RÖHM ZS Ø 160 mm with 1 set of stepped jaws - MULTIFIX quick-change tool post size A with 3 tool holders - Emergency stop - Hinged chuck guard - Operating manual with electrical diagram Required space (L x W x H): 1900 x 700 x 1300 mm Weight: 560 kg Good condition

Condition: used, L + Z Lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine No. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Dujlhcdwoykca Hevew Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speed: 33 - 1500 rpm, 12 steps Chuck flange: short taper DIN 55027 size 6, 4x M12 Tailstock taper: MK 4 Motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle speed via 12 gearbox steps - EMCO 3-jaw scroll chuck Ø 200 mm with turning and boring jaws - Multifix size B quick-change tool post with 3 change cartridges - Automatic longitudinal and face feed - Coolant system - Spindle brake - Emergency stop - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Duelhcdey D E Riswvew Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Duslhcdjzkkayewvew Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders Djlhcezfguiodwvsuw D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: good (used), Different tool holders . As we informed, they are used on Biglia CNC lathe. Djlhcey Shyisdwvsuw

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. Duelhcsxdmgvsdwvew The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe Duslhcsxz Tfasdwvow - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing Dujlhjx I A Hcjcdwvew • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Total weight: 3,600 kg Operating hours (as of May 6, 2026) Duelhcszfiipedwvjw Operating hours: 9,243 h Machining time: 5,991 h EQUIPMENT Fully programmable B-axis Total of 9 axes Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Duslhcdjvk T S Ajwvow Speed: 1 - 58.4 rpm Drive power: 45 HP Tailstock

Condition: like new (used), Year of construction: 2024, operating hours: 30 h, functionality: fully functional, Brand: DN Solutions Model: Lynx 2100LC Type: CNC lathe Chuck Size: 10 inch Duslhcsy U Dpfsdwvsw Max Turning Diameter: Ø350 mm Max Turning Length: 537 mm Bar Capacity: Ø81 mm X/Z Axis Travel: 205 / 560 mm Rapid Traverse X/Z: 30 / 36 m/min Spindle Speed: 3,500 rpm Spindle Power: 18.5 / 15 kW Spindle Nose: A2-8 Turret: 12 station Tool Size: 25 × 25 mm Control Unit: FANUC i Series Tailstock: MT#4 Machine Weight: Approx. 3,450 kg

Condition: refurbished (used), Year of construction: 1977, turning diameter: 16,000 mm, faceplate diameter: 6,300 mm, year of last overhaul: 2026, Completely overhauled single-column vertical turning lathe, Blansko model SKSJ 1A, equipped with one vertical head for turning and milling operations. Technical specifications: Faceplate diameter: 6300 mm Maximum workpiece height: 4800 mm Max. turning diameter with column near the faceplate: 8000 mm Max. workpiece diameter: 14700 mm Max. workpiece diameter for internal turning: 16000 mm Infinitely variable faceplate rotation: 0.5 – 20 rpm Max. workpiece weight: 100 tons Milling spindle max. speed: 1500 rpm 2-speed gearbox with 15 kW Siemens motor Manual clamping, ISO 50 taper tool Delezi S Tlshcdwvouw Machine weight: approx. 220 tons The machine was completely overhauled in 2025 and supplied with the following brand-new components: - New electrical cabinet made with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 numerical control, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers with a 1/5 ratio - New ballscrews on 2 axes (vertical head and crossrail) - New scales on 2 axes, Heidenhain - The hydraulic and support systems made with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New lubrication system, DROPSA-Italy or similar For more information, please contact us.

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 850 mm, turning diameter: 400 mm, CNC lathe Victor Vturn A-26/85 YCM with Y-axis Year of manufacture: December 2023, installation: 2024 Only 350 cutting hours! Fanuc Oi-TF with Manual Guide Turning diameter: 400 mm Turning length: 850 mm Main spindle: 3500 rpm, 22 kW BMT65 turret, 12/24-position Tool drive: 6000 rpm Y-axis travel: +/- 55 mm C-axis Chuck: 250 mm, spindle bore: 76 mm Delhcezkk Spodwvjuw Coolant pressure: 6.5 bar Chip conveyor Tool measurement system Programmable tailstock

Condition: new, Year of construction: 2026, functionality: fully functional, Details Condition : New Control Unit : OSAI Linear Motion System : PMI Automatic Centering : PYNOMATIC SYSTEM SMC Spindle Motor : ELTE Spindle Motor 7,5 kW MAX. Part Width :1200 X 1000 mm | MAX Part Height 600 mm Engine Power : 24kW Z Axis Weight Balancing Systm: Ø50 Pneumatic Cylinder B Axis : Infinite Movement Duelhcdwszi Smrsvow C Axis : Axis Rotation Range ± 400 X Axis : Speed 40.000 mm/min Y-V Axis : Speed 40.000 mm/min Z Axis : Speed 40.000 mm/min Z Axis : OSAI 1.8 kW Servo Motor With Absolute Encoder and Brake X Axis : OSAI 1.3 kW Servo Motor With Absolute Encoder Y Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder V Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder A Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder C Axis : OSAI 1,3 kW Servo Motor With Absolute Encoder

Condition: used, Year of construction: 2008, turning length: 1,043 mm, turning diameter: 550 mm, spindle bore: 116 mm, spindle speed (max.): 2,000 rpm, CNC lathe, 2 axes, Doosan Puma 400B Year: 2008 Fanuc 21iTB with Manual Guide Max. turning diameter: 550mm Max. turning length: 1043mm Z-axis travel: -1100mm Chuck: 380mm Spindle bore: 116.5mm Max. spindle speed: 2000 rpm Duelhcezh Uq Dsdwvjw Spindle gearbox: low gear, high gear 10-tool turret Steady rest with SMW autoblock, diameter 30-245mm Measuring probe Tailstock Chip conveyor with tray and pump Documentation

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,600 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 950 kg, input current: 16 A, warranty duration: 12 months, input voltage: 400 V, GLASS CUTTING TABLE – MANUAL – BRAND NEW Model: SDRXL FULL Year of manufacture: 2026 – brand new Manufacturer: EXPOGLASS® (Poland) – for over 11 years we have been supplying glass cutting tables to workshops on 3 continents. Our background in flat glass processing has allowed us to design equipment with exceptional durability and functionality. Standard equipment: Manually extendable supports for vertical loading (with replaceable ash wood blocks), 4 swivel polyamide wheels Ø80 mm for heavy loads, 4 adjustable leveling feet, Worktop covered with highly durable black felt + ash wood edge strips, Two steel plates mounted underneath for easy unloading with a forklift, Lower beam filled with reinforced vibrated concrete for maximum stability, Duolhcjf Svtkjdwvow Pneumatic tilting with hydraulic speed controller, Longitudinal and cross breaking bars, pneumatically operated by foot pedals, Air cushion with integrated 2.2 kW high-pressure fan for easy handling of heavy glass sheets, Adjustable breaking bar height. Technical data: Weight: 950 kg Table size: 340 × 260 cm Height: 91 cm (adjustable ±2 cm) Power supply: 400 V, 50 Hz, 16 A plug (5 pin) Air connection: 7 bar, standard 7.2 NW fitting Documents & warranty: Declaration of conformity with EU Machinery Directive, CE marking, EU EMC declaration, Warranty: 12 months, Operating manual (Polish & English). Condition: brand new, ready for immediate use. Delivery: we organize worldwide transport (EU and beyond).

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRD 2L PU PP Manufacturing year 2025 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) Djlhcdwof Sqffjveuw - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 900 kg - top surface size: 340 cm x 240 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement Duslhcded Tamdswvsw - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: used, Year of construction: 2007, turning length: 1,000 mm, turning diameter: 600 mm, spindle bore: 115 mm, spindle speed (max.): 2,000 rpm, 2-axis CNC lathe Leadwell LTC-35C Year of manufacture 2007, Taiwan Fanuc OiTC control system Max spindle speed 2000 rpm Gearbox with low/high range Chuck size 380mm Spindle bore 115mm Max turning diameter 600mm Turning length 1000mm Z-axis travel 1100mm Djlhcdszh Iwqjwvouw Tailstock 12-tool turret Included with the machine: - Documentation - Chip conveyor - Chip tray with pump - Tool pallet

Condition: excellent (used), For sale is a Schimanek Type 70 manual bookbinding guillotine, manufactured in West Germany. This is a robust machine designed for the precise cutting of paper, cardboard, and other bookbinding materials. The device is equipped with a long cutting arm that provides high cutting force, an adjustable back gauge with a scale, and a stable worktable. The massive construction guarantees accuracy and long-term durability. Technical specifications: Manufacturer: Schimanek Model: Type 70 Serial number: 24256 Country of manufacture: West Germany Type: manual bookbinding guillotine Djlhceziwnhjdwvsuw Maximum cutting width: approx. 700 mm Adjustable back gauge with scale Manual material clamping Robust metal construction Condition: used Applications: paper cutting, cardboard cutting, corrugated board cutting, bookbinding work, printing houses, graphic design studios. The machine is sold in the condition shown in the pictures.