Used Vertical Internal Grinder for sale (16,829)

Condition: used, Vertical grinder Baudin machine sold without startup Guedsh Ab Scjpfx Ah Dok

Condition: ready for operation (used), total height: 1,800 mm, total length: 2,700 mm, total width: 2,400 mm, magnetische tafel: Ø 800 mm Deze modellen zijn zeer geschikt voor goedkope, economische verwerking van cirkelvormige werkstukken via oppervlakte- en stapslijpbewerkingen. Er is geen tijdverlies door vertraging, versnelling en omkering zoals bij conventioneel heen en weer slijpen. De slijpschijf blijft in contact met het werkstuk tijdens het slijpproces. Enkele werkstukken kunnen centraal op de tafel worden geplaatst, terwijl meerdere werkstukken centraal op de tafel kunnen worden geplaatst om het gebruik van de tafelruimte te ondergrond. Gjdpfxox Eng Aj Ah Djuk

Condition: used, Year of construction: 2005, Type Honanlage Control Nagel In our opinion, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Gsdpfx Asxwdxioh Deuk Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg Gedpfx Ahexr Aw Te Deuk

Condition: used, Used Fabrication Technology approximately 5,957 litre total capacity 316 stainless steel vertical reactor. Unit measures approximately 2,150mm tan to tan x 1,600mm diameter. Unit has welded dished top and bottom heads. Internal rated 3 bar/full vacuum design pressure at 5 to 37 deg.c. External stainless steel limpet coil jacket rated 6 bar/full vacuum design pressure at 5 to 37 deg.c. Unit has top entry stainless steel agitator with Lighnin model LS220 drive. Unit is mounted on side supports. Gedoxvqkijpfx Ah Djuk Dimensions: 2,150mm tan to tan x 1,600mm diameter

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m Gsdpfx Ahow Rv Tao Douk There is a movable table that moves lengthwise and crosswise. *

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - center height : 102 [mm] Guodpfx Ahoxylwfs Dok - Max. part length : 230 [mm] - X/Z stroke : 450 / 200 [mm] - Rapid traverses rates (X/Z) : 12000 [mm/min] SPINDLE SUPPORT - Number of spindles : 1 - Spindle speeds : 42.000 [rpm] - Power : 3 [kW] PART-HOLDER HEADSTOCK - Speed : 1500 [rpm] - Power : 1.4 [kW] - Spindle passage : 28.6 [mm] - Type of cone : A2.4/CM5 - B axis adjustment angle (manual) : +/- 2 [°] - C axis indexing precision : 0.0001 [°] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 34 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS - Number of hours under power : 1022 [h] EQUIPMENT - CNC : Fanuc 0i-TFP - Software StuderSIM - Coolant tank - Coolant through spindle - Oil mist extractor - Diamond grinding device - Workpiece probe

Condition: good (used), Year of construction: 1980, Vertical Internal Thread Cutting Machine Hagen & Goebel Model HG 124 N Machine No. 4063 Year of manufacture: approx. 1980 Thread cutting capacity in steel: M3 to M12 x 1.5 Thread cutting capacity in light metal: M3 to M28 x 1.5 Gusdpfx Aoxq Tlfoh Djk Throat depth: 250 mm Quill stroke: 80 mm Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volt, 50 Hz - 6 speed settings via belt change (3 speeds via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 TPI thread pitch - Table height adjustment with rack and pinion via handwheel on the round column - Spindle mounting with taper Ø 14.8 to 16 mm Required space (L x W x H): 900 x 500 x 1800 mm Weight: 260 kg

Condition: used, Year of construction: 1959, pulling force - max. 10 t max. ram stroke 1300 mm voltage 380 V weight 1400 kg Guedpfsvh Nd Ajx Ah Dsk Broaching machine RAUSCH RS10/1300 Year of construction: 1959 Stroke: 1,800 mm Tractive force: 10 tonnes

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN Gsdpfx Ahexr Aw Hs Deuk - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Guodpfot Dwb Dex Ah Dek Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm Gujdpfx Aou Ngybjh Djk - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Used panel of a NAGEL MSU2 Gusdov Twgijpfx Ah Dok No warranty

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t Guodpfx Ahjw Dugaj Djk dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. Gjdpfjt Hwupex Ah Deuk We have a selection of honing machines available. Please let us know what you need.

Year of construction: 1999, condition: used, pulling force - max. 6,0 t max. ram stroke 1250 mm Gujdjd Il A Nspfx Ah Dsk dimensions of the machine ca. 1,20 x 1,20 x 3,25 m

Condition: used, Internal grinder VOUMARD 5S Gjdpfx Aheu Hac De Deuk

Condition: used, honing diameter 99999 mm stroke 99999 mm Guedpfsv Tqqhsx Ah Dok throat 99999 mm Used Treiber from a Nagel MSU2 control No warranty

Condition: used, Technical details: Gujdpfx Ahowx Shko Dok honing diameter: 4-31 mm stroke: 350 mm throat: 250 mm

Condition: used, Year of construction: 1984, honing diameter 12 mm Godot Hwvtjpfx Ah Douk stroke 40 mm throat mm total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. m 3 spindle honing machine with in process measuring

Condition: used, TECHNICAL DETAILS - Grinding diameter : 3 / 80 [mm] - Grinding depth : 80 [mm] - Max. part length : 250 [mm] - Max. part diameter : 240 [mm] - Centers height : 130 [mm] - Part-holder headstock swiveling : -5 / +60 [°] - Bar clearance : 25 [mm] Godpfjuhbmkjx Ah Dsuk - Metric shaft nose internal taper : 40 - Part-holder spindle speed with continuous adjustment : 350 / 1.200 [Rpm] - Strokes X/Z : 50 / 300 [mm] - Installed power : 17 [kW] - Dimensions (LxDxH) : 200 x 180 x 160 [cm] - Machine weight : 2.200 [kg] EQUIPMENT - Automatic downfeed - 1 VOUMARD M45DR internal spindle : 45.000 [Rpm] - Automatic parts loader - Hydraulic wheel dresser - 3 jaws chuck - Coolant tank * with coolant through part center

Condition: used, honing diameter 99999 mm stroke 99999 mm Gjdpfx Ahjv Tqque Dsuk throat 99999 mm Used without warranty

Condition: used, Year of construction: 1998, honing diameter 90 mm Gsdpfxot Hw T Ss Ah Douk stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - max. grinding length: 500 [mm] - max. grinding diameter: 3000 [mm] EQUIPMENT - 1 grinding spindle 12000 [t/mm] - retractable wheel dressing device Godpfx Ahsu Hac Ro Douk - coolant tank with pump and paper filtration

Condition: used, Year of construction: 2000, honing diameter 45 mm stroke 1000 mm 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12,3mm Guodpfx Ajxddq Esh Dek -13,3mm -21,1mm