Condition: refurbished (used), Year of construction: 2009, Equipment: documentation/manual, Sumitomo Demag IntElect 160/520-1000 NC 5 Year of manufacture: 2009 Control / Programming: NC 5 Screw: 50 mm Injection volume: 442 cc / 393 g Clamping force 1600 kN Tiebar spacing 520 mm x 520 mm Celnjwd Afks Hbhajgt Mold height min 275 mm – 585 mm Plate spacing max. 1080 mm Mold opening stroke 495 mm Ejector stroke 120 mm Core pull 2x Plug ejector plate safeguarding Equipment: 2-circuit core pull in series with mold movement (1x fixed platen + 1x movable platen) Ejector parallel to mold movement Clamping force controlled Freely programmable inputs and outputs (4 inputs/4 outputs) (for 5/2-way pneumatic valve) Switch-on/shutdown program (with spraying) Interface for Handling, Euromap 67 (50-pin) Interface for mold protection (ejector plate protection) Integrated hot runner control, 2 zones Mold protection Intruding Plug combination for electrical connection, Change journal, PDE control, graphic MWE1 + MWE2 graphic

Condition: excellent (used), Year of construction: 2015, ZHAFIR ZE 1900/430 (2015) ZERES, low hours Clamping force: 190 t Screw diameter: 40 mm Shot weight: 194 g Distance between tie bars V: 520 mm Distance between tie bars H: 570 mm Min mould height: 200mm Max mould height: 550 mm Coln Hbhovx Uhbjasgt Shot volume: 213 cm3 Type: Horizontal Drive: Hybrid

Condition: excellent (used), Year of construction: 2015, Wittmann Batenfeld SmartPower 110/525 Cgsln Howgxt Njbhaet Unilog B6 Control

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Model: KM 800/6100 MC Year of Manufacture: 2001 Clamping Force: 800 tons Control System: MC4 Machine Description: White-yellow, hydraulic locking mechanism Installed Power: 254 kW Mold Opening Stroke: Max. 2000 mm Mold Height: Min. 600 mm Distance Between Tie Bars: 1120 mm (horizontal) x 1000 mm (vertical) Platen Size: 1600 mm x 1510 mm Cjlorw A Uksn Hbhajgt Screw Diameter: 105 mm, Type HPS-M Injection Pressure: Max. 1469 bar, with a maximum shot weight of 3743 g (PS) Robot Interface: Equipped with a Wittmann robot Core Pulls: Freely programmable, 2 Hot Runner Control: 8 zones Cooling System: Stäubli cooling battery connection Screw Drive Unit: Hydraulic Gravimetric Mixer This machine has been well maintained and is ready for immediate use. The machine is sold as seen, with no warranty. Prospective buyers are encouraged to inspect the machine in person.

Condition: excellent (used), Year of construction: 2006, Technical Specifications Year of manufacture: 2006 Clamping side Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Max. installation height: 1300 mm Max. distance between platens: 2300 mm Opening stroke/max. installation height: 1000 mm Ejector stroke: 300 mm 1st injection side Celnewdxd Ae Hbhaogt Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc Technical Specifications Clamping side Clamping force: 8000 kN Maximum clamping platen: 1520 mm Clearance between tie bars: 1170 mm Min. installation height: 700 mm Installation height Max.: 1300 mm Max. platen spacing: 2300 mm Max. opening stroke/installation height: 1000 mm Ejector stroke: 300 mm 1st injection side Screw diameter: 105 mm Displacement: 4160 cc 2nd injection side Screw diameter: 90 mm Displacement: 3050 cc

Year of construction: 2007, Condition: ready for operation (used), This Arburg Allrounder 820 S 4000-1300/350 was manufactured in 2007. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing. Contact us for more information about this machine. Application Types Injection Moulding Cjln Hbsv T D R Iehasgt

Condition: ready for operation (used), Year of construction: 2001, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 8000 - distance between columns (h x v): mm 1120 x 1000 - distance of mold opening max: mm 1400 - mold installation height min/max: mm 600/1100 - opening stroke of the clamping platen: mm 2000 - Ejector stroke: mm 250 - Ejector force: kN 226 ( Backward: 59 ) SCREW UNIT - Screw diameter: mm 95 - Ratio Ls/D: 23 - Injection pressure: bar 1795 - Injection volume: cm3 3367 - Injection size for PS: g 3064 - Injection capacity: cm3/s 690 - Closing force of the nozzle: kN 166 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 61 WEIGHT AND DIMENSIONS - net weight: t 45 - dimensions of the machine (L x W x H): m 10,4 x 2,86 x 2,39 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Possible control updates to extend the lifetime of the plant - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away! Cgjlnjnh Rwgo Hbhaet

Condition: used, Year of construction: 2008, 8 units available (year 2007-2008) only as a package for sale. Arburg 320C 500-100 (2008) Cgeln Hjvtzqrsbhaot Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language

Condition: excellent (used), Year of construction: 2005, operating hours: 82,985 h, clamping force: 250 kN, screw diameter: 18 mm, injection pressure: 2,500 bar, injection weight: 20 g, Arburg 270U-250-70 (221) Description General information Product Code: (221) Availability: In Stock Year of production: 2005 Brand: Arburg Technical data Shot Weight: 20 g Clamping Force: 250 kN Condition: Used Screw dia: 18 mm Injection pressure: 2500 bar Tie bar distance: 270 x 270 mm Platen size: 380 x 380 mm Mould height min.: 200 mm Type of controls: Selogica Language: German Cgolnovu Tlks Hbhajt Power:10,7 kW Workinghours: 82.985 h Weight: 2100 kg Dimensions: 3m x 1,1 m Hopper: No Core pull: Yes Euromap: Yes

Condition: used, Year of construction: 2020, operating hours: 5,400 h, clamping force: 400 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, Freight basis: ex-site Delivery time: by arrangement Payment terms: 100% before taking delivery of the machine, net Cgelsv S H Rhjn Hbhast

Condition: excellent (used), Year of construction: 2007, operating hours: 59,000 h, Technical Specifications Year of manufacture: 2007 Clamping side Clamping force: 13,000 kN Opening stroke/max. installation height: 2,300 mm Max. distance between clamping platens: 4,000 mm Min./max. mold installation height: 1,000 - 1,700 mm Max. clamping platen height: 1,910 mm Min. mold size: 1,020 x 820 mm Clearance between tie bars: 1,500 mm Nozzle radius: R40 mm Mold weight: 29,000 kg Ejector stroke: 350 mm 1st injection side Screw diameter: 120 mm Displacement: 6,786 cc 2nd injection side Screw diameter: 105 mm Displacement: 5,195 cc NC5 control system Core pulls AWS/DS: 1/1 Cgolnjwdw E Se Hbhaot

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 22200 kg Clamping Unit Clamping force 3000 kN Distance between bars 1090 mm Mould height min 550 Cjlnov T D Nws Hbhaegt Additional Equipment ERC 33/2-F (Year: 2008) Only 1K, second unit was dismantled and scrapped by Engel Machine is tie-bar-less Handling was dismantled after the last production run and should be reassembled and commissioned by Engel or an expert When the clamping cylinder is fully retracted, the mold area between the two clamping platens is approx. 1,400 mm Dimensions of the measuring surface: a: 4.35 m b: 2.00 m c: 3.28 m / Dimensions of the right-hand cover parallelepiped: Length: 6.70 m Width: 2.00 m Height: 2.28 m Measuring distance: 1.00 m Oil temperature: 40,00 °C /Injection pressure: 21.00 bar/Holding pressure: 86.00 bar/Screw stroke: 130.00 mm/Opening stroke: 497.00 mm/V1, V2, V3: 100.00 %/Ejector P: - bar/Cooling time: 10.00 s/Cycle time: 24.82 s/Shot weight: 264.64 g/Material: HDPE/Injection mould Fa. / Injection mould: 0,00/Drive power: 37 KW This Engel Victory 2050H500V/300 Combi was manufactured in 2008. A hydraulic injection moulding machine, it represents a solid choice for those looking to enhance their production capabilities with a reliable and efficient model. Contact us for more information. Application Types Injection Moulding

Condition: reconditioned (used), Year of construction: 2002, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) Cgelonh Rnujn Hbhajt - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: excellent (used), Year of construction: 2014, Arburg 570A 2000-1300 ALLDRIVE (2014) electric Clamping force: 200 t Screw diameter: 60 mm Shot weight: 620 g Distance between tie bars V: 570 mm Csln Hbovydypohasgt Distance between tie bars H: 570 mm Shot volume: 678 cm3 Type: Horizontal Drive: Electric

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN Cgjln Hewftr Dobhaet weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: used, Year of construction: 2020, operating hours: 1,600 h, clamping force: 400 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,650 bar, overall weight: 24,500 kg, terms of delivery: EXW (ex Works) delivery time: on request Cgjlnev S H Rbs Hbhast terms of payment: 100% prior to delivery

Year of construction: 2015, Condition: ready for operation (used), General Data Machine weight 8500 kg This Engel Victory 330H/200V/120 Combi was manufactured in 2015. A hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this Engel Victory 330H/200V/120 Combi hydraulic injection moulding machine. Contact us for more information. Application Types Cgjlov T D N Don Hbhast Injection Moulding

Condition: excellent (used), Year of construction: 2010, Arburg 1500T - 1600-400 (rotary) Cgeln Hsv Nag Dobhaet Table diameter: 1500 mm Clamping force: 160T Mould height min. mm : 400 mm Screw dia: 40 mm Shot weight : 184g/PS

Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Cgslsv S H N Ron Hbhajt

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 4000 kg Clamping Unit Clamping force 1300 kN This Arburg Allrounder 420C 1300-350 was manufactured in 1996. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420C 1300-350 hydraulic injection moulding machine. Contact us for more information. Coln Hev T D Rbobhasgt Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2017, Clamping force: 100 t / increased to 125 ton Screw diameter: 32 mm Shot volume: 103 cm3 Csln Hsv I Ukhsbhajgt Type: Horizontal Drive: Hydraulic Machine is electric immediately available

Year of construction: 1999, operating hours: 1,16,061 h, Condition: ready for operation (used), This Arburg Allrounder 420 C 1000-250 was manufactured in 1999. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 420 C 1000-250 hydraulic injection moulding machine. Contact us for further details regarding this machine. Cslnjv T D Rhe Hbhaogt Application Types Injection Moulding

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Cgolevl Skgon Hbhast Injection pressure: 2500 bar Working hours: 38.035 h

Condition: ready for operation (used), Year of construction: 2007, operating hours: 64,344 h, Injection Unit Stroke volume 16 ccm Clamping Unit Clamping force 400 kN Opening stroke 350 mm Distance between bars 270 mm Mould height min 200 mm Additional Equipment Oil Cooling: Programmable oil temperature regulation with heat exchanger. Injection Control: 3-stage injection regulation (30-290 mm/s). Nozzle Control Block: T2 type for 270-570 CG series. Clamping Unit: WKZ-Schließeinheit 270 CS (base configuration). Minimum installation height: 200 mm. Control System: CPU: Pentium III with USB interface. / I/O Cards: Digital (L-ARB 790) and analog (L-ARB 798) modules. /Temperature Control: 12-channel programmable card (L-ARB 777). S-Systemdiskette CS/S/A/U (Version 03.060-00.000). Direct Graphics Interface (Version 04.060-00.000). Coolant Distribution: Regulated coolant circuits with manual valves and measuring pipes. / Additional connections for free inlet/outlet. Coln Hbhsv T D Rzoaegt Injection Unit Stroke volume 16 ccm Clamping Unit Clamping force 400 kN Opening stroke 350 mm Distance between bars 270 mm Mould height min 200 mm Additional Equipment Oil Cooling: Programmable oil temperature regulation with heat exchanger. Injection Control: 3-stage injection regulation (30-290 mm/s). Nozzle Control Block: T2 type for 270-570 CG series. Clamping Unit: WKZ-Schließeinheit 270 CS (base configuration). Minimum installation height: 200 mm. Control System: CPU: Pentium III with USB interface. / I/O Cards: Digital (L-ARB 790) and analog (L-ARB 798) modules. /Temperature Control: 12-channel programmable card (L-ARB 777). S-Systemdiskette CS/S/A/U (Version 03.060-00.000). Direct Graphics Interface (Version 04.060-00.000). Coolant Distribution: Regulated coolant circuits with manual valves and measuring pipes. / Additional connections for free inlet/outlet. This Arburg Allrounder 270 C 400-70 was manufactured in 2007. A hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this Arburg Allrounder 270 C 400-70 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2006, Main Drive Main motor power 55KW Stroke 600mm Cgsln Houpm R Ssbhaet Injection Unit Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes Main Drive Main motor power 55KW Stroke 600mm Injection Unit Screw diameter 65 mm Shot weight 1132g Injection pressure 2315 bar Clamping Unit Clamping force 270 ton Opening stroke 600 mm Distance between bars 620 x 620 mm Ejector stroke 200 mm Additional Equipment Core Valves: 2 Air Valves: 4 EU 12 for Robot Connection: Yes This Battenfeld TM 270 / 2800 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 620 x 620 mm and an opening stroke of 600 mm. Equipped with 2 core valves, 4 air valves, and an EU 12 interface for robot connection. A solid choice for enhancing production capabilities. Contact us for more information. Application Types Injection Moulding