Condition: excellent (used), Year of construction: 2005, Here we offer a very well maintained constantly serviced injection molding machine complete maintenance by manufacturer until current Cgjlnoh Dp R Eo Eh Eyjt Injection molding machine Krauss-Maffei KM 65-160 C2 Injection molding machine: Manufacturer / Type: Krauss-Maffei KM65 160 C2 Serial No.: 61007063 Year of manufacture: 2005 Control system: MC4 complete annual maintenance by the manufacturer clamping unit: clamping force: 650kN /65 tons tie bar distance: 405 x 405mm mold installation height min.: 250mm platen distance max.: 750mm Clamping platens standard: 610 x 610mm ejector stroke: 150mm core pull: 1 x pcs. Injection unit Injection unit size / cylinder ø: 160 / cylinder ø25mm and cylinder ø18mm Shot weight max (ø25): 47g/PS Injection flow: 63cm³/sec Spec. injection pressure: max. 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & weights: Weight with control cabinet: 3.8 t Length: 3800mm Width (machine only): 1050mm Height: 1890mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine is available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: good (used), Year of construction: 2004, ENGEL DUO 4550/700 – Technical Specification General Information: Machine designation: DUO 4550/700 Controll : CC100 Clamping Unit: Clamping force: 7000 kN Opening force (with pressure pads): 510 kN Opening stroke: 1350 mm Minimum mould height: 450 mm Maximum mould height: 1350 mm Colnsv U Dn Ns Eh Eyjgt Daylight (platens open): 2700 mm Platen dimensions (H × V): 1460 × 1360 mm Tie bar distance (H × V): 1030 × 930 mm Max. mould weight: 9000 kg Ejector stroke: 300 mm Ejector force: 90 kN Ejector strokes (Euromap 6): 8 Dry cycle time (Euromap 6): 7.0 seconds Injection Unit: Screw diameter: 90 mm L/D ratio (barrier): 24 Plasticizing rate: 2488 cm³/s Shot volume: 2860 cm³ Shot weight (theoretical): 2600 g Injection flow rate: 533 cm³/s Injection pressure: 1910 bar Specific injection pressure: 2100 bar Nozzle length: 185 mm Nozzle contact force: 65 kN Heater capacity (zone 7): 62 kW Pump drive power: 75 kW Oil capacity: 1000 liters Weight: Net weight of clamping unit: 22 tons Net weight of injection unit: 10 tons Cores: 2+2 Linear Robot Engel ERC

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 455 mm, displacement volume: 320 cm³, injection pressure: 1,590 bar, injection weight: 291 g, mold height (min.): 180 mm, ejector force: 3,300 N, ejector stroke: 140 mm, opening stroke: 420 mm, total length: 5,410 mm, total width: 1,450 mm, total height: 2,005 mm, overall weight: 5,200 kg, heating capacity: 9.75 kW (13.26 HP), number of injections: 1, power: 18.5 kW (25.15 HP), input frequency: 50 Hz, input voltage: 380 V, input current: 61 A, Equipment: documentation/manual, Used injection machine in good condition, ready for use. Celn Eowcyvkeh Eyjgt Without peripheral equipment.

Condition: repair required (used), Year of construction: 2021, machine/vehicle number: HA0339, Equipment: - 1 chiller - 1 P100XS temperature control unit - 1 injection mold test rod Cgjln Eh Ejwhazqoyet

Condition: reconditioned (used), clamping force: 500 kN, screw diameter: 38 mm, injection pressure: 1,341 bar, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Csln Ehewfp Hkj Eyegt

Year of construction: 2001, Condition: excellent (used), Hydraulick engine DMT 250 Cgsljwfg Sdjn Eh Eyst Danhrss Year of manufacture 2001

Condition: excellent (used), Year of construction: 2011, operating hours: 56,000 h, Sell Injection machine Arburg 570-2000-800 2011 year In very good technical and visual condition very quiet operation no oil leaks Control selogic Bimetallic injection system Fi 45 1 x air Celn Eh Eeukirbsyogt 2 x hydraulic core robot output

Condition: good (used), Year of construction: 2008, Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Coleu Rq Aion Eh Eyogt Selogica CF card reader machine tested English language Type: Horizontal Drive: Hydraulic Machine hours: 53000

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4450000410, clamping force: 500 kN, screw diameter: 32 mm, column diameter: 45 mm, displacement volume: 95 cm³, injection pressure: 1,076 bar, injection weight: 69 g, mold height (min.): 250 mm, overall weight: 2,430 kg, power: 16.8 kW (22.84 HP), Equipment: documentation/manual, Dr.Boy LSR (silicone) injection molding machine, built in 2024, is being sold unused due to project cancellation. Equipment Evacuation Cjln Eov R Ia Ish Eyegt Interface for brush control Interface for handling device (EUROMAP 67)

Condition: good (used), Year of construction: 1998, clamping force: 110 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 158 cm³, injection pressure: 2,429 bar, injection weight: 142 g, plate length: 770 mm, plate width: 745 mm, total length: 4,300 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 5,800 kg, Core pull 1 without robot Cslowgi Tyen Eh Eyjgt

Condition: reconditioned (used), clamping force: 220 kN, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, overall weight: 820 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Cslewfpxten Eh Eyogt Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: ready for operation (used), Year of construction: 2001, General Data Machine weight 16000 kg Cjlnowbwz Ij Eh Eyegt Clamping Unit Clamping force 3200 kN Additional Equipment International Dimension: 3200H-1636 This FERROMATIK K-TEC 320 S was manufactured in 2001. A robust hydraulic injection moulding machine, it's ideal for precision plastic processing. Consider the opportunity to buy this FERROMATIK K-TEC 320 S hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 800kN, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 580mm/590mm, opening stroke: 450mm, min. mold installation height: 250mm, max. mold weight: 650kg, ejector stroke: 125mm, ejector force: 45kN. Screw diameter: 35mm, shot weight: 168g, dosing volume: 185cm³, injection pressure: 1800bar, plasticizing capacity: 15g/s. Control system: NC5, robot interface: Euromap 67, machine weight: approx. 4100kg, machine dimensions X/Y/Z: 4100mm/1400mm/1900mm, operating hours: approx. 73500h. Documentation available. On-site inspection is possible. Cslnswgczke Eh Eysgt

Condition: excellent (used), Year of construction: 2009, SUMITOMO SE350HD-C1600 (2009) Clamping force: 350 t Screw diameter: 63 mm Shot weight: 853 g Distance between tie bars V: 710 mm Distance between tie bars H: 760 mm Plate dimensions: 1070x1020 mm Shot volume: 888 cm3 Type: Horizontal Drive: Electric Only 40.000 hours Cjln Eh Esvygmlsysgt 2 core pullers

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, Functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Cgoln Ehsu E Id Te Eyot Förderband Schutzzaun

Condition: reconditioned (used), Functionality: fully functional, clamping force: 805 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Cjlnjwfpqcj Eh Eysgt Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 3,688 h, General Data Measurements width 1160 mm Measurements depth 5146 mm Measurements height 2365 mm Machine weight 9800 kg Injection Unit Screw diameter 60 mm Shot weight 644 g Stroke volume 678 cm³ Clamping Unit Clamping force 250 T Opening stroke 580 mm Max open daylight 1130 mm Mould height min 250 mm Mould height max 550 mm Additional Equipment Core Pull: 2 Air Circuit: 1 This Victor VS-250 hydraulic injection moulding machine was manufactured in 2000. It is ideal for precision plastic processing tasks. Contact us for more information about this machine. Application Types Injection Moulding Celn Eewg H Uzjh Eyjgt

Year of construction: 2008, Condition: ready for operation (used), Clamping force: 1600kN, opening stroke: 500mm, mold installation height min./max.: 275mm/585mm, max. platen distance: 1085mm, platen dimensions X/Y: 770mm/770mm, tie bar dimensions X/Y: 520mm/520mm, ejector stroke: 160mm. Screw diameter: 40mm, screw stroke: 203mm, injection weight: 160g. Documentation available. On-site inspection is possible. Celn Eh Eewgczweyegt

Year of construction: 2015, Condition: excellent (used), Windsor Plug X Press Technologies Cgoln Ehouzhchj Eyet Year :2015 Serial nr.: 019 Oil tank capacity: 400L the part no of the screw is 03424130. Ø = 55 mm, total length = 1610 mm SS PxP-881 D55 20D 4,5D a

Condition: ready for operation (used), Year of construction: 2003, operating hours: 8,666 h, General Data Measurements width 1180 Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mmm Shot weight 451 g Stroke volume 475 cm³ Clamping Unit Clamping force 180 T Cgslswg Iaron Eh Eyst This Victor VS180 was manufactured in 2003. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2000, Condition: ready for operation (used), Clamping force: 500kN, platen dimensions X/Y: 540mm/540mm, tie bar spacing: 355mm/355mm, opening stroke: 400mm, min. mold installation height: 210mm, clearance: 610mm, ejector stroke: 125mm. Screw diameter: 30mm, L-D ratio: 20, stroke volume: 144.3cm³, injection weight: 128g, injection pressure: 1890bar. Machine dimensions X/Y/Z: approx. 3650mm/1150mm/1800mm, weight: approx. 2500kg, control: NC4, operating hours: approx. 41100h. Documentation available. On-site inspection is possible. Cjlewgczdsn Eh Eyogt

Condition: ready for operation (used), Year of construction: 1999, operating hours: 4,937 h, General Data Measurements width 1180 Measurements depth 4343 Measurements height 2190 Machine weight 6400 Injection Unit Screw diameter 55 mm Shot weight 451 g Stroke volume 475 cm³ Clamping Unit Clamping force 180 T Max open daylight 970 mm Distance between bars 510 x 510 mm Mould height min 200 mm Cgeln Eewg Ia Eoh Eyot Mould height max 500 mm This Victor VS180 was manufactured in 1999. A hydraulic injection moulding machine, it offers robust performance for various plastic processing applications. Consider the opportunity to buy this Victor VS180 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 500kN, tie bar distance X/Y: 370mm/370mm, platen dimensions X/Y: 540mm/530mm, opening stroke: 400mm, min. mold height: 135mm, clearance: 535mm, ejector stroke: 125mm. Screw diameter: 30mm, injection volume: missing (please add), injection pressure: 1890bar, core pulls: 2. Machine dimensions X/Y/Z: approx. 3600mm/1200mm/1800mm, weight: approx. 2500kg, operating hours: 80300h. Documentation available. On-site inspection is possible. Cslnjwgczqo Eh Eyegt

Condition: ready for operation (used), Year of construction: 2003, operating hours: 7,507 h, General Data Measurements width 1135 Measurements depth 3354 Measurements height 2080 Machine weight 4100 Injection Unit Screw diameter 40 mm Shot weight 155 g Stroke volume 163 cm³ Clamping Unit Clamping force 80 T Max open daylight 670 mm Distance between bars 360 x 360 mm Cgoln Eewg H U Uoh Eyot Mould height min 150 mm Mould height max 350 mm This Victor VS80 hydraulic injection moulding machine was manufactured in 2003. It is a robust and reliable choice for your production needs. Contact us for more information. Application Types Injection Moulding

Year of construction: 2014, operating hours: 59,121 h, Condition: ready for operation (used), Injection Unit Screw diameter 135 mm Stroke volume 8158 ccm Clamping Unit Opening stroke 1508 Mould height min 500 Mould height max 1008 Ejector stroke 300 Additional Equipment Robot V40 Access Platform Temperature Control Units (2 pieces each) Conveyor Belt Suction and Dosing Station by Koch Coln Eh Eowbla Esyogt This Engel Duo 11050/800 hydraulic injection moulding machine was manufactured in 2014. Consider the opportunity to buy this Engel Duo 11050/800 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding