Condition: good (used), Year of construction: 2015, Traverses X Y Z: 1524 x 596 x 584mm, Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, Fjbjunaaws Hdk Eqspg ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, 127mm Quill Travel, Interlocked guards, Power Drawbar, low Volt light.

Condition: refurbished (used), Year of construction: 2004, operating hours: 5,000 h, Functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: Siemens, controller model: 840D, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel X / Y / Z: 450 / 270 / 310 mm Drilling capacity in St 60: 16 mm (indexable insert drill) Thread cutting Milling capacity in St 60: M12, 60 cm³/min Speed range: 20 - 15,000 rpm Control: SIEMENS 840D Spindle power at 100%/25% ED: 2.2 / 7.2 kW Torque: 23 Nm Rapid traverse X,Y / Z: 40 / 60 m/min Workpiece changing device: 0 / 180° Clamping surface: 2 x 550 x 300 mm Thread and fitting hole grid: M16 x Ø 15H7 x 50 mm Load weight: max. 200 kg per side Weight difference: max. 50 kg between both sides Workpiece changeover time: approx. 2.0 s Tool places: 24 pieces Tool taper: HSK A 40 DIN 69893 Tool diameter: max. 50 mm Tool diameter with free adjacent positions: max. 100 mm Tool length: max. 160 mm Tool weight: max. 1.2 kg Tool change time: 0.8 s (depending on control system) Chip-to-chip time: approx. 2.2 s (depending on control) MACHINE DETAILS Operating voltage: 400 / 230 V, 50 Hz/N/PE Compressed air: 6 bar ±1 bar Ambient temperature: max. 40° EQUIPMENT Fpsb Hdot R R A Isk Eqsg - Moving column machine with workpiece changing device Guides with long-term grease lubrication - Digital main drive with spindle with sealing air supply - Tool clamping monitoring - Automatic tool changer with robust, fully encapsulated pick-up chain magazine, with mechanical collision protection as well as, Cone cleaning via blast air - Look Ahead with dynamic pilot control, Bellshape acceleration ramp, software limit switch, access authorization via key switch for tool corrections, NC program changes and machine parameters - CHIRON Powersafe software package for the targeted switch-off of installed consumers - Definable time for variable "warm-up" program - Thermocontrol - Thermodrive - Operating hours and piece counter on screen - 230 V socket - Socket for portable mini handwheel - Splash guard cover - Switch cabinet cooler - Oil-free maintenance unit - Installation elements - Flushing gun - Extraction connection Extraction Ø 150 - Machine preparation for IKZ - CHIRON tool life monitoring - Chip conveyor (scraper belt) - Fixture flushing - 4th + 5th NC axis, ready to plug in - Documentation Floor vehicle on site / electrician for dismantling can be provided by the seller for an additional charge.

Year of construction: 2014, Condition: excellent (used), Machine travel (X-axis) 1020mm, (y axis) 540mm (z axis) 510mm X Axis Rapid Traverse 36 m/min Y Axis Rapid Traverse 36 m/min Z Axis Rapid Traverse 30 m/min Fpsb Hdk Eolz Nxhjqjg Max. Spindle Speed 12000 r/min Max. Spindle Power 18.5 kW Max. Spindle Torque 353.2 N·m Table Length 12000 mm Table Width 540 mm Max. Table Weight 800 kg No. of tool station 30 Machine Length 2412mm, Width 3110mm and Height 3143mm Weight 6500kg Spindle nose: MAS BT 40 Feed range 1 - 15000 mm/min Fanuc Doosan I Series control RenishawTouch Probe 4th axis ready

Condition: good (used), Year of construction: 2013, Functionality: fully functional, TECHNICAL DETAILS Fpsb Hjtuwkbsdk Eqeg Control: Heidenhain TNC 620 Speed: 4,000 rpm Weight: approx. 12,000 kg Max. Table load: 2,000 kg Travel X: 1,600 mm Travel Y: 750 mm Travel Z: 900 mm Clamping surface: 1,800 x 700 mm MACHINE DETAILS Gear spindle: 2-stage Spindle power: approx. 38 kW Tool holder: SK 50 Spindle: manually swiveling Tool magazine: 24-fold EQUIPMENT Chip conveyor with coolant system Electronic handwheel

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece height (max.): 520 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Control system: Siemens 840D X-axis: max. 720 mm Y-axis: max. 600 mm Z-axis: max. 500 mm Distance spindle nose - table: 150 - 650 mm Diameter of the table clamping surface: Ø 600 mm Max. Table load: 500 kg Clamping grooves (number x width x pitch): 5 x 18 H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Max. Workpiece size: Ø 700 x 520 mm Machine accuracy (VDI / DGQ 3441) Positioning accuracy: ±0.005 mm / 300 mm Repeat accuracy: 0.005 mm Resolution of the axes: 0.001 mm Linear axis position measuring system: Heidenhain rotary encoder Position measuring system rotary axes: Heidenhain direct encoder Main spindle Type: AC motor direct drive Speed range: 20 - 15,000 rpm Torque (25% ED): max. 34 kW / 180 Nm Spindle cone: SK 40 DIN 69871 Spindle probe: Renishaw OMP 40 Tool changer Capacity: 60 tools Max. Tool diameter: 76 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool breakage detection/measurement: Renishaw NC4 "Split Laser" laser Axis drives X, Y, Z axes: Siemens AC motors B, C axes: AC motors Siemens Travel speed Rapid traverse X, Y, Z: max. 36 m/min B-axis speed: max. 25 rpm C-axis speed: max. 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system I (external) Tank capacity: 240 l Operating pressure (external): 0.9 bar Coolant system II (IKZ) Pressure: 42 bar (paper belt filter) MACHINE DETAILS Operating pressure: 6 bar Width with scraper belt chip conveyor: 3,384 mm Width without scraper belt chip conveyor: 2,407 mm Depth: 3,490 mm Max. height: 2,864 mm Control panel swivel radius: 1,380 mm Fpsbju Tq Hqj Hdk Eqjg Transport dimensions (L x W x H): 4,685 × 2,588 × 2,864 mm Installation dimensions (L x W x H): 4,963 x 4,665 x 3,005 mm Weight: 10,500 kg Total connected load: 35 kVA EQUIPMENT - Linear roller guides in all axes - Automatic machine switch-off (M30 Power Off) - Digital axis and spindle drives - Scraper belt chip conveyor (discharge height: 800 mm) - Chip trolley - External coolant supply - Flushing and air gun - Spindle blow-out system - Full protective cladding (without cabin roof) - Data interfaces (USB 1.1 + Fast Ethernet) - Set-up elements, adjustment screws and work area lighting - Operating instructions, circuit diagram and programming software (CD-ROM) - Operating tool - Air cooling inside/outside - Automatic side doors - AOF extraction duct

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,183 h, Functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller model: OSP-P300M-R, workpiece weight (max.): 900 kg, number of slots in tool magazine: 32, Geometry was measured with a thousandth of a clock. TECHNICAL DETAILS Control unit: OSP-P300M-R X-axis: 1,050 mm Y-axis: 560 mm Z-axis: 460 mm Speed: 12,000 rpm Distance table to spindle nose: 150 - 610 mm Rapid traverse X / Y / Z: 49 / 40 / 32 m/min Table size: 1,300 x 560 mm Table load: 900 kg Tool holder: BT-40 Tool magazine: 32 tool positions Tool diameter: 90 mm Fpob Hdeuhwfcek Eqeg Tool diameter with free secondary positions: 120 mm Tool length: 300 mm Tool weight: 8 kg MACHINE DETAILS Machine dimensions: 2,564 / 3,194 / 2,746 mm Weight: 8,300 kg Cutting time: 5,182 h Spindle running time: 5,953 h Switch-on time: 23,718 h EQUIPMENT - High pressure pump, 15 bar - Chip conveyor

Condition: good (used), Year of construction: 2016, Traverses X Y Z 1626 x 813 x 762mm, Table size 1626 x 711mm, Table load 4,000 lbs, Spindle nose to table 102-864mm, Spindle speed 12,000 rpm, 40 Hp motor, Fpeb Hou Hzcxsdk Eqog 24 atc, Haas control, coolant, swarf auger,

Year of construction: 2004, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28860011684, TECHNICAL DETAILS X axis: 1000 mm Y-axis: 600 mm Z-axis: 600 mm Control: SIEMENS SINUMERIK 810 D POWERLINE Fob Hdkspvlbne Eqepg rotational speed: 10.000 rpm tool places: 24 tool holder: SK 40 MACHINE DETAILS on request EQUIPMENT IKZ 15 bar, 800L tank Chipping machine Flushing gun X-Y-Z AxBs measuring system

Condition: used, Year of construction: 2018, operating hours: 8,300 h, Vertical machining center, Haas brand, model VF-2, year 2.018. Maximum spindle speed: 8,000 RPM, X axis travel: 762 mm, Y axis: 406 mm, Z axis: 508 mm, tool magazine for 20 units, worktable dimensions: 914 x 356 mm, maximum weight on worktable: 1,361 kg. Fpsb Hdevkw I Ijk Eqeg

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, 3 axis CNC machine with 4th and 5th axis for manual tilting. Heidenhain control. Fully functional. Can be inspected under power. Fpsb Hju Tvgisdk Eqeg

Condition: excellent (used), Year of construction: 2012, operating hours: 4,000 h, Functionality: fully functional, machine/vehicle number: 12009, Machine has processed 90 % of aluminum workpieces. A RENISHAW measuring system has been retrofitted and the tool cabinet with BT40 holders and the LISTA drawer cabinet with contents are included in the price. TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 650 mm Z-axis travel: 600 mm Spindle speed: 8,000 rpm, infinitely variable Torque: 285 Nm Control: FANUC Series 18i-MB Table width: 650 mm Table length: 1,100 mm Table load: 900 kg Distance from table center to spindle nose: 725 mm Number of slots in the tool magazine: 32 Tool holder: 40 mm Tool length: 250 mm Tool diameter: 80 mm Rapid traverse X-axis: 24,000 mm/min Rapid traverse Y-axis: 24,000 mm/min Rapid traverse Z-axis: 20,000 mm/min MACHINE DETAILS Feb Hdk Eetr A Ereqopg Total weight: 7,000 kg Spindle operating hours: 4,000 h Coolant supply: 20 bar Input voltage: 400 V EQUIPMENT - Documentation/Manual - Chip conveyor

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: H-V12319, travel distance X-axis: 660 mm, travel distance Y-axis: 356 mm, travel distance Z-axis: 456 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control system: ULTIMAX 4 Feb Hdeuiytxek Eqopg X travel: 660 mm Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 - 10,000 rpm Table dimensions: 762 x 356 mm Tool changer: 20-fold Spindle holder: SK40 Rapid traverse X/Y/Z: 28 m/min MACHINE DETAILS Drive power: 11 kW Space requirement (L x W x H): 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z; 1050 x 570 x 510mm, Table size 1300 x 570mm, min-max height spindle to table 150-660mm, spindle speed 12,000rpm, 30 station ATC spindle taper BT40, Fsbeu T Iybs Hdk Eqepg spindle power 18.5 kW, Fanuc control, coolant, swarf conveyor and probe.

Condition: ready for operation (used), Functionality: limited functionality, To be sold in a package: Fjb Hdkjt Takao Eqspg HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but not put into operation. Freight basis: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately

Condition: like new (used), Year of construction: 2019, operating hours: 4,867 h, CNC machining center, Haas brand, model UMC-750SS, 5 axis, year 2.019. Maximum spindle speed: 15.000 RPM, X axis travel: 762 mm, Y axis: 508 mm, Z axis: 508 mm. Equipped with wifi, USB, WIPS system, drill through spindle (300 PSI pump), side mounted and high speed tool magazine, with capacity for 40 units, automatic coolant refill, auxiliary coolant filter, chain chip extractor, programmable coolant nozzle, electric cabinet cooling... Fpob Hsvkw Dcedk Eqjg

Condition: ready for operation (used), Hilma hydraulic vice Machine vice Jaw width: 200mm Clamping width: 0-340mm Clamping force: approx. 80-100 kN ( could only be measured up to 60 kN. ) 3 clamping ranges adjustable via socket pins. Space requirement: 700mm x 300mm x 170mm ( L x W x H ) You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Fpob Hdou It Ntsk Eqeg Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 10,580 h, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,600 kg, TECHNICAL DETAILS Manufacturer: TOYODA Type: FV 1365 Year of manufacture: 2009 Control: Heidenhain iTNC 630 Machine weight: approx. 7,600 kg Travels X-axis: 1,300 mm Y-axis: 650 mm Z-axis: 600 mm Febju Hkl Aj Hdk Eqepg Spindle Speed range: 12,000 1/min Tool holder: HSK A63 Coolant supply Internal coolant supply: 20 bar Tool magazine Number of tools: 40 places Space requirement Dimensions (L x W x H): 4,738 x 2,990 x 2,940 mm

Condition: used, Year of construction: 2007, Manufacturer HURCO Fpebjtpczxs Hdk Eqsg Type VMX 50 year of construction 2007 Control ULTIMAX Machine weight approx. 10 t. Tool holder SK40 x-path 1,270 mm y-path 660 mm z-path 610 mm Speed range 10,000 1/min Table size 1,500 x 660 mm Number of tools in the magazine 40 Pl

Condition: excellent (used), Year of construction: 2002, operating hours: 19,883 h, Functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, rotational speed (max.): 12,000 rpm, pivoting range: 103 °, swivel angle B-axis (min.): 12 °, swivel angle B-axis (max.): -91 °, HIGHLIGHTS > Installation of a new spindle in March 2022 > General overhaul of NC attachment table in March 2022 > General overhaul of the tool magazine in June 2023 TECHNICAL DETAILS Control: CNC contouring control, incl. 15" TFT color flat screen HEIDENHAIN TNC 430 X-axis: 880 mm Y-axis: 630 mm Z-axis: 630 mm NC swivel milling head: B-axis Tilting range: 103° (-91/+12°) Drive power (40/100% ED): 15/10 KW Speed range: 12,000 rpm Table clamping surface: 1,250 x 700 mm NC top table: Lid 18/L01 (can be used for horizontal and vertical machining) Clamping surface: Ø 700 mm Height: 280 mm Tool holder (DIN 69871): SK40 Switch-on time: 62,431 h Program run time: 19,883 h EQUIPMENT - Closed work area with revolving door, electrically protected, incl. machine light - NC swivel milling head (B-axis) - Automatic tool changer (pick-up) ATC 32 - 3D measuring probe Heidenhain TS 642 - Operating mode 4 (extended manual intervention) - Direct path measuring systems (resolution 0.001°) - Electronic handwheel - Production package, consisting of 600 l tank, rotating viewing window, chip flushing in the work area work area - IKZ internal coolant supply through the spindle 40 bar form AD - Spiral chip conveyor with chip ejector - External coolant nozzles switchable from water to blast air - Enclosure cooler Fsb Hdkjt Tbvke Eqepg - Set-up elements (3 wedge shoes, height-adjustable) - Documentation

Year of construction: 2001, Condition: excellent (used), DOM: 2001 X - 548.6 mm, Y - 408.9 mm, Z - 459.7 mm Power - 5.6 kW RPM - 15000 rpm ATC - 30 Table - 599.4 mm x 378.5 mm Taper - BT40 Fpjbsgx Aafe Hdk Eqsg Control - CNC (Yasnac J300) Machine weight: 4 tons Machine Dimensions: 7' x 8' x 9'

Condition: good (used), Year of construction: 1999, Functionality: fully functional, travel distance X-axis: 1,200 mm, controller manufacturer: Heidenhain TNC 426, rotational speed (max.): 16,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, TECHNICAL DETAILS X-axis: 1,200 mm Y-axis: 900 mm Z-axis: 500 mm Speed range: 16,000 rpm Control: Heidenhain TNC 426 MACHINE DETAILS Tool holder: SK 40 Tool places: 30 Fpjb Hdstzlpksk Eqeg Table size: 1,400 x 900 mm Space requirement (LxWxH): 4.5 x 5.5 m Machine weight: 12,000 kg EQUIPMENT Chip conveyor Internal cooling (IKZ) Coolant system Coolant tank 300 L

Condition: good (used), Year of construction: 1997, Travel 1000 x 750 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 30-fold, milling spindle SK 40 12.000 rpm, Fpebjhty E Io Hdk Eqeg incl. IKZ system and spool feeder, glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested !

Condition: used, Year of construction: 2002, operating hours: 69,840 h, Functionality: fully functional, machine/vehicle number: 204-77, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 300 mm, feed length Y-axis: 250 mm, feed length Z-axis: 250 mm, nominal power (apparent): 10 kVA, torque: 23 Nm, controller manufacturer: FANUC, controller model: 21i-M, table width: 300 mm, table length: 550 mm, table load: 100 kg, overall weight: 2,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 420 mm, number of spindles: 1, number of slots in tool magazine: 12, tool mount: 32 mm, tool length: 160 mm, tool diameter: 63 mm, tool weight: 700 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, CHIRON Vertical CNC machining center FZ 08 W YEAR 2002 Fob Hdk Ejurb Azsqspg Ready for use, partly overhauled, installation and IBM can be offered. Drilling capacity D 16mm Thread cutting M12 Milling capacity 30cm/min CNC type: Fanuc 21iM 2 pallets 0/180 Spindle revolutions: 10500 12 HSK32 tools Coolant system with chip container Tank capacity 100 liters Pump capacity 60 liters/min at 1 bar Automatic loading door

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 115195, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 8,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS CNC control: OSP-E100M X-travel: 762 mm Y-travel: 460 mm Z-travel: 460 mm Fob Hdevambpjk Eqepg A-axis travel: +110° B-axis travel: +40° Table dimensions: 1,000 x 460 mm Table type: Nikken rotary table, model 5AX-120 Spindle Spindle speed: max. 8,000 rpm Tool holder: BT40 Number of tools: 32 MACHINE DETAILS Coolant supply (pressure): 15 bar Machine dimensions (W x D x H): 2,750 x 1,900 x 2,700 mm Weight: 6 tons Connected load: 23 kVA

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested ! Fsb Hdji El Iaok Eqspg