Used other vertical machining centers for sale (102)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,818 h, controller manufacturer: SIEMENS, controller model: 810D, spindle motor power: 13,000 W, number of axes: 3, This 3-axis DMG DMC 635 V eco was manufactured in 2011. It features a vertical milling spindle with a tool holder SK 40, capable of speeds up to 8,000 min-¹. The machine offers a maximum drive power of 13 kW and a rapid traverse rate of 25 m/min. Ideal for complex machining tasks, consider the opportunity to buy this DMG DMC 635 V eco vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Torque: maximum spindle torque is 83 nm; nominal torque is 57 nm. • Feed drive: ac servo motors for x, y, z axes • Feed speed: up to 20000 mm/min • Rapid traverse: 25 m/min Bsdpox D D Hgjfx Agkswi • Tool tightening force: 10 kn Extra Information Machine still under power

Condition: good (used), Year of construction: 2008, Dugard Eagle 1500 Table: 1570 × 500 mm T-slot width: 18 mm Tool holder: BT40 Bwjdpfoypqzcjx Agkji Accessories: chip conveyor, spare belt Issue with tool clamping – clamping action is stiff.

Condition: new, Year of construction: 2026, functionality: fully functional, Working area in X – Y – Z mm: 4,200 – 1,600 – 100 (available on request up to 6,000 x 2,200mm) • Continuous working table • Lateral and rear reference stops • Gantry-type machine with double drive system Bedpfjyk Acnox Agkewi • Milling unit with 4-axis HSD electrospindle • Knife unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine • Control system: OSAI • Software • Easy programming • File import • Remote control panel/console • Teleservice and video-diagnosis: real-time solution • Automatic guide lubrication • Lateral protective covers for group protection • Machine documentation: user and maintenance manual, software manual, spare parts catalog, wiring diagram, EC declaration of conformity.

Condition: ready for operation (used), Year of construction: 2005, total height: 3,080 mm, table width: 3,275 mm, overall weight: 7,600 kg, product length (max.): 2,000 mm, This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details. • Axis Travels: • X Axis: 600 mm • Y Axis: 425 mm + CUA stroke 75 mm • Z Axis: 450 mm • A Axis Rotation: 360° • B Axis Rotation: −20° / +110° Bwedpjynhy Hjfx Agkei • Distance between table and spindle nose: 65 – 515 mm • Table Diameter: Ø 350 mm • Maximum Workpiece Weight: 200 kg • Table Turning Speed: 30 – 1500 rpm • Tool Magazine Capacity: 50 tools • Maximum Tool Diameter (with adjacent tools): Ø 90 mm • Maximum Tool Diameter (without adjacent tools): Ø 125 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 8 kg • Rapid Traverse X–Y–Z: 45000 mm/min

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, This 5-axis HERMLE C30U + RS Automation was manufactured in 2006, offering advanced capabilities for precision machining. Ideal for complex geometries, this vertical machining centre represents a significant asset for enhancing your production efficiency. Consider the opportunity to buy this HERMLE C30U vertical machining centre. Contact us for more information. Additional equipment • Tool Magazine: Additional magazine ZM157 • Tool Breakage/Measurement: BLUM tool breakage/measurement • Measuring Probe: Heidenhain • Event Messenger: Available • Electrical Heat Compensation: Provided • External Blowing Air: Provided / Oil Mist Extraction: Provided / Chip Trolley: 450 liters • Rotating Transparent Window: Available • Additional Accessories: Manual control module, flange for extraction 1, bed flushing, sealing air for scales, machine license TCS-Soflex Machine Benefits Technical Machine Benefits • Nc swivel rotary table: diameter 280 mm • Table axis: a-axis off-center / table specification: 6-way rotary feedthrough Bsdpox D Ew Hofx Agkjwi • Spindle hours: approximately 50000 hours • Internal coolant supply: 80 / filter: paper belt filter / conveyor: scraper belt conveyor / automatic cabin door: yes • Polycarbonate safety glass: windows / frequency: 50 hz • Rs automation Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2006, number of axes: 3, This 3-axis HAAS VF-8 vertical machining center was manufactured in 2006. It operates on a voltage of 360-480, with a phase 3 and frequency of 50/60 Hz. The full load capacity is 20 AMPS, with a largest load of 35 AMPS. Consider the opportunity to buy this HAAS VF-8 vertical machining center. Contact us for more information. • Voltage: 360–480 V Bsdpfx Agex D Ep Aekswi • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 20 A • Largest load current: 35 AInternal cooling 21 barSpiral chip conveyorProgrammable coolant nozzleNew gearbox and spindle installedIn June and July 2024, the following components were renewed:GearboxVector drive, spindle driveDecember 2024: Double arm tool arm

Condition: ready for operation (used), Year of construction: 2001, operating hours: 14,336 h, controller manufacturer: HAAS, controller model: n/a, total height: 1,473 mm, table load: 1,350 kg, number of axes: 3, This 3-axis HAAS VCE 550 was manufactured in 2001. It features a work spindle with a maximum speed of 7500 rpm, expandable to 10,000 rpm with an optional dual drive. The working area includes dimensions of 508 x 406 x 508 mm, and the table can support up to 1350 kg. Consider the opportunity to buy this HAAS VCE 550 vertical machining centre. Contact us for more information about this machine. • Clamping surface: 660 x 356 mm • T-slot width: 14 mm Bwjdpfx Agox D Eg Ujkji • T-slot spacing: 125 mm • Tool change operations: 321250 timesMachine still under power Additional equipment • Note: 4th axis is available but defective; power unit for AC servo motor for HRT160 must be replaced. Dimensions Machine Depth 2357 mm Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2007, controller manufacturer: SIEMENS, controller model: 840D Control, number of axes: 4, This 4-axis DECKEL DMC 835 V was manufactured in 2007. It features an NC dividing head EA 410, manual tailstock, and a TS 640 measuring probe. Additional highlights include a coolant/air blast switch, flushing gun for chip removal, and an electronic handwheel. This machine is complete with accessories. If you are looking to get high-quality milling capabilities consider the DECKEL DMC 835 V machine we have for sale. Contact us for more information. Additional equipment • NC dividing head EA 410 • TS 640 measuring probe • Coolant/air blast switch • Flushing gun for chip removal • Electronic handwheel – Operating mode 4 Machine Benefits Technical Machine Benefits • Manual tailstock Bodex D Iu Uspfx Agkswi • Faceplate diameter: 160 • Three-jaw chuck diameter: 160 • Machine complete with accessories • On hour 17275 / spindle hours 5803 Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 1997, overall weight: 7,600 kg, This Eumach MC1050 PB was manufactured in 1997. A vertical machining centre with a voltage of 380V, cycle frequency of 50/60 Hz, and a capacity of 25 KVA. Weighing 7600 kg, consider the opportunity to buy this Eumach MC1050 PB vertical machining centre. Contact us for more information. • Voltage: 380V • Cycle: 50/60 Hz Bjdpfox D Ifaox Agkowi • Capacity: 25 KVA

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, controller model: Millplus V400, number of axes: 3, This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Control & Electrical • Control: Millplus V400 • Screen: Color, text in German/English • Operating Voltage: 400 V, 50 Hz • Control Voltage: 24 V • Drive: Digital with overload protectionSpindle & Tooling • Spindle: With quill • Maximum Spindle Speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool Holder: ISO 40 – DIN 69871 • Pull Stud: DIN 69872 Form A • Tool Changer: 24–25 tool positionsWorking Area & Movement Bwodpex D Naljfx Agkji • Longitudinal (X) Travel: 600 mm • Cross (Y) Travel: 525 mm • Vertical (Z) Travel: 500 mm • Rapid Traverse X/Y/Z: 18 m/min • Feed Rate: Up to 10,000 mm/min • NC Rotary Table: 3-axis on fixed tableCooling & Accessories • Coolant System Capacity: 150 L • Full Enclosure: Yes • Paint: Gray / Green (NCS)Documentation • 2 sets, GermanThe machine has a 4-axis C-axis (dividing head)

Condition: ready for operation (used), travel distance Z-axis: 600 mm, feed length X-axis: 900 mm, feed length Y-axis: 900 mm, controller manufacturer: Siemens Sinumerik 840D SL, total height: 3,415 mm, total length: 4,655 mm, total width: 5,890 mm, empty load weight: 16,500 kg, rotational speed of tool magazine (max.): 40,000 rpm, Type: XCEEDER 900/RT XCEEDER is een 5-assig geïnterpoleerd bewegend bewerkingscentrum voor hogesnelheidsfreesbewerkingen. Speciaal ontworpen voor toepassingen van complexe tandwielen en waaiers tot mallen, matrijzen en gereedschappen, voor projecten in de lucht- en ruimtevaart, automobielindustrie en energieopwekking. - Maximale werkstukdiameter: 900 mm - Maximale afstand tussen spindel en tafel: 700 mm - Hydraulische klemming op tafel - A-as: -30° / 110° - C-as: continu - max. koppel op de spindel: 18/16 Nm - Gereedschapswisselaar met 150 posities Opties die op deze machine worden gemonteerd: 1 - 40.000 tpm hogesnelheidsspindel 2 - tafel dia 700 mm met hydraulische klemming Gereedschapswisselaar met 3-150 posities 4 - spaantransportband 5 - koelsysteem met terugwinning 6 - Koelvloeistoftemperatuurregeling 7 - hoge drukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - chipverzamelbox 10 - Voorinstellingssysteem en gereedschapintegriteit: laser- en mechanische taster voor meetgereedschappen 11 - Renishaw-meetkop Veel van de voordelen van de XCEEDER komen voort uit de kern van zijn structuur. Van een opmerkelijke winstmakerij, via het gietijzeren portaal, van alle trillende eigenschappen van "Metalquartz", Bretons gepatenteerde materiaal. Dit materiaal biedt een thermische inertie en is een effectief bestanddeel tegen bewerkingen, wat resulteert in zeer nauwkeurige en onverwachte reacties op het bewerkingsproces. Table dimensions: dia 700 mm Max weight on the table: 1000 kg Bsdpfex Twa Iox Agkjwi Admission in spindle (ISO): HSK-E40 Power on the spindle: 45/40 kW Number of axes: 5 AXIS simultaneous Toolchanger: yes Number of toolholders: 150 positions

Condition: ready for operation (used), travel distance Z-axis: 510 mm, feed length X-axis: 850 mm, feed length Y-axis: 510 mm, nominal power (apparent): 15 kVA, controller manufacturer: Siemens 810, total height: 2,220 mm, total length: 2,480 mm, total width: 2,740 mm, empty load weight: 4,500 kg, rotational speed of tool magazine (max.): 8,000 rpm, additional equipment features: yes, afstand tussen spindel en tafel: 150 660 mm Siemens uitgerust met ShopMill Table dimensions: 1000 x 450 mm Depth of throat (uprights-spindlecenter): 550 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 7,5 kW Number of axes: 3 axes Toolchanger: yes Bsdpjwwbfiofx Agkjwi Number of toolholders: 20 positions

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Table dimensions: 1200 x 500 mm Bedpfexadmrox Agkswi Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 30 positions

Condition: used, Year of construction: 2016, The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options: Tool magazine for 30 tools Tool length measurement, tool breakage detection Factory-installed preparation for chip conveyor (left) Magazine (HSK) for 155 tools Air blower at the workpiece Signal light (end of machining: yellow) Additional: Work area lighting Coolant gun Air blower through the spindle 70 bar preparation, including interface for high-pressure system Automatic opening/closing of the operator door Mazak Monitoring System B RMP 60 (only/H/V) Collision monitoring by Brankamp 2 Renishaw TS27R tool presetting devices NC rotary table Holding device for vertical use of the NC rotary table Table center partition for pendulum machining 3D model of the work area in STEP format 5-axis milling technology Knoll compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l/min) 1) High-pressure cooling 70 bar, 7 pressure stages Chip conveyor, hinged belt design Additional M-codes: 1 set = 2 M-codes Preparation for dual extraction system (mechanical nozzle) 0.198 mm Transformer for the European market 1 set of manuals in electronic form on CD 1 set of adjustment tools Foundation set (anchor bolts + plates) MAZAK standard paint Work area lighting Additional items: AirFresh FMN V12 extraction system (installed on both sides and coupled with a door sensor) Holding device for vertical operation of the rotary table 2 x Renishaw TS27R integrated tool presetting devices Spare parts: Y-axis motor, tool magazine Linear axis shifter motor Rotary axis shifter motor Cylinder for swivel unit width: 3500 mm length: 820 mm X-axis travel range: 3000 mm Y-axis travel range: 800 mm Traversal range Z-axis: 720 mm min. distance spindle nose to table top: 140 mm max. distance from spindle nose to table top: 860 mm max. table load: 2500 kgf B-axis: ± 110 degrees Working spindle taper: HSK63 Max speed: 18,000 RPM Min. Drehzahl: 35 min-1 Rated power: ( 100 % continuous operation) 33,0 kW Emergency travel speed X-Y & Z axis: 50 m/min Working table width: 3500 mm Worktable length: 820 mm Width of T-slots: 18 mm Number of T-slots: 7 Distance of T-slots: 100 mm Table height from the floor: 870 mm Tool changer number of tool places (Standard): 30 Number of tool stations (optional): 48 Tool selection method: shortest path tool shank: Steep cone 40 With occupied side positions: 80 mm With available spaces: 130 mm max. tool weight: 8kgf Total weight of all magazine tools: 150 kgf max. tool length: 350 mm Tool change time: (Span-to-Span) 4.7 s Connected load: 400 V / 50/60 Hz Air pressure: 5 – 9 bar Air volume: 260 l/min Tank capacity: 500 l Bedpfxox Idwie Agkewi Dimensions (Height x Length x Width): 3376 x 5480 x 4051 mm Weight approx: 16300 kg colour: Gray / Black

Condition: used, Year of construction: 2009, functionality: limited functionality, machine/vehicle number: B-8023, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th Axis # Rapid traverse speed: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock features: # Spindle distance: 200 mm # Maximum distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal cooling), Tool Holder (Size 40) # Speed range (standard): 100/8,000 rpm, Max torque: 85 Nm at 330 rpm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: Sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. Tool change time (fastest): 3 s. Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Bodoxxi Skopfx Agkswi Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # 4th axis: Nikken CNC180 FA (2012) # Broken tool detection system: Blum Novotechnik # Chip extractor # Lubrication system # Electrical panel cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine condition: OPERATIONAL — with 1 spindle / 2nd spindle defective — can be repaired.

Condition: repair required (used), Year of construction: 2010, functionality: not functional, machine/vehicle number: B-8029, Technical Characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Table surface to floor height: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 4th axis # Rapid traverse rate: X, Y, Z – 30 m/min # Travel: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock Capabilities: # Spindle distance: 200 mm # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with through-spindle coolant), Tool holder: Size 40 # Speed range (standard): 100–8000 rpm, Maximum torque / at 330 rpm: 85 Nm, 7.5 kW Automatic Tool Changer: # Number of tools: 20, Selection system: Sequential / random, # Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, # Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 6 s. # Tool change time: 3 s. Electrical connection: # Supply voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: Bwedpfxexxiy Ij Agksi # CNC control: GE Fanuc Series 31i MODEL A # Chip extractor # Lubrication system # Cooling system # Electrical panel # Spindle cooling system: HARBOR Model: HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine Condition: NOT WORKING # Tool changer: 1 unit broken – needs replacement (not repairable) # Spindles: broken – need replacement (not repairable) # Hydraulic unit: broken – needs replacement or repair

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: B-8024, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 2 twin horizontal spindles + 4th axis Bodexxi Ewopfx Agkjwi # Rapid traverse rates: X, Y, Z – 30 m/min # Travel paths: Longitudinal (X-axis) 600 mm, Transverse (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Headstock: # Spindle distance: 200 mm # Max. distance from spindle center to table: 650 mm # Spindle interface: ISO 7388 (with internal coolant), Tool holder size: 40 # Speed range (standard): 100 – 8000 rpm, Maximum torque at 330 rpm: 85 Nm, 7.5 kW Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm, Max. tool length: 250 mm, Max. tool weight: 6.5 kg, Tool change time: 3 seconds Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 30 kVA Dimensions: # Required floor space: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4200 kg Equipment included: # CNC control – GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Cooling system # Electrical cabinet # Spindle chiller: HARBOR Model: HBO-750PTSB2 # Documentation: Digital and hard copy available Machine condition: NOT OPERATIONAL # Y axis motor defective – requires replacement (not repairable) # 2 tool changer units defective – require replacement (not repairable) # Spindles defective – require replacement (not repairable) # Hydraulic unit defective – needs replacement or repair

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 1830108, Technical specifications: # Machining workspace: X 300 mm; Y 650 mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A-axis), 360° indexable dividing head (resolution 0.001°) # Number of pallets: 2; Maximum table load: 400 kg # Maximum clamping/part size: Ø 575 x 830 mm; maximum weight: 360 kg # Rapid traverse rate: X/Y/Z 75/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Number of spindles: 2 / spindle spacing: 300 mm # Spindle speed: 1–10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tools / chip-to-chip time approx. 2.5 s # Tool max. Ø75 mm / length max. 275 mm / max. weight 7.5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 70 kVA / 125A Dimensions: # Installation footprint: approx. 3.9 x 3.2 x 3.1 m # Weight: approx. 10,500 kg Scope of supply: # CNC control: Fanuc 30i-Model A # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling unit # High-pressure oil filtration system max. 40 bar: Knoll AE 1060 Bwjdpfx Agexw Ukvekji # Cooling system for spindle, guides, and switch cabinet # 2 oil lubrication units # Part present sensing (P/Y): with low-pressure air sensors # Broken tool detection: Blum Novotec Laser Light Probe # Tool support detection system in working spindle Machine condition: NOT OPERATIONAL # Magazine chain broken — REQUIRES REPLACEMENT

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: B-8044, Technical characteristics: Bwjdpexw Tqzsfx Agkji # Machining workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (maximum load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / Width of T-slots: 18 mm # Axis configuration: 3 LINEAR AXES (X, Y, Z) + 4th axis # Rapid traverse: X, Y, Z - 30 m/min # Travel: Longitudinal (X-axis): 600 mm, Cross (Y-axis): 400 mm, Vertical (Z-axis): 510 mm Headstock specifications: # Maximum distance spindle to table: 650 mm # Spindle taper: ISO 7388 (with internal cooling), Tool holder: Size 40 # Spindle speed range (standard): 100/14,000 rpm, Max. torque: 63.7/89.4 Nm at 330 rpm Automatic tool changer: # Number of tools: 20 # Tool selection system: sequential/random # Max. tool diameter (adjacent): 85 mm, Max. tool diameter (non-adjacent): 135 mm # Max. tool length: 300 mm # Max. tool weight: 6.5 kg # Tool change time: 6 seconds (standard), 3 seconds (fast) Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment included: # CNC Control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Emulsion paper filtration system: Filber S.L. Model FTH5/10 – 200 l/min # Electrical cabinet cooling system # Spindle cooling system: HARBOR Model HBO-750PTSB2 # Documentation: Electronic and hard copy available Machine status: IN OPERATION

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Bwodpfx Aexwmvksgkei Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling Bwodpfxsx Nr Tuj Agkji • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), Year of construction: 2016, total height: 3,600 mm, overall weight: 21,500 kg, spindle speed (max.): 24,000 rpm, product length (max.): 4,814 mm, number of axes: 5, This 5-axis RÖDERS RXU 1001 DSH was manufactured in 2016. It features a machining range of 800 mm × 855 mm × 500 mm and a maximum workpiece weight of 800 kg. The machine is equipped with a milling spindle that operates at 24,000 rpm and includes a tool changer for 24 tools. If you are looking to get high-quality machining capabilities, consider the RÖDERS RXU 1001 DSH vertical machining centre we have for sale. Contact us for further details. • Machining range: 800 mm × 855 mm × 500 mm • Swivelling range (A-axis): ±115° • Rotation range (C-axis): almost unlimited • Table size: 400 mm round or 400 mm square, 600 mm round with two flattened sides • Max. workpiece weight: 800 kg • Feed rate: 0–60,000 mm/min • Milling spindle (standard): 67 Nm (S1), HSK A63, max. tool diameter 35 mm • Tool changer (standard): 24 tools (rotary – can be loaded during machining) • Tool changer (optional, integrated): 40+ tools (chain changer – can be loaded during machining) • Integrated measuring laser • Chip disposal (standard): 2 screws into chip box behind the machine Bedsymnvfopfx Agkjwi Additional equipment • Optional chip conveyor

Condition: ready for operation (used), Year of construction: 2008, This STAMA MC526 was manufactured in 2008. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information. Bedpfxjx S Skxj Agkowi Additional information • 40-tool magazine • NC swivel table (4th axis) • Chip conveyor • Belt filter system • Internal coolant supply via spindle • High pressure capability • Renishaw probe • Extraction system

Condition: good (used), Year of construction: 2004, Parts shown by hand not come. Bwsdpfx Agsylykxjkji

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,284 h, overall weight: 2,200 kg, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis FANUC ROBODRILL α-D14MiB5 was manufactured in 2020. It features a spindle speed of 10,000 rpm and a 100 mm column extension. The machine includes a rotary table DDR260iB and a Renishaw OMP40 3D spindle probe for enhanced precision. If you are looking to get high-quality machining capabilities, consider the FANUC ROBODRILL α-D14MiB5 vertical machining centre we have for sale. Contact us for further details. • Big Plus spindle interface • 100 mm column extension • Machine roof • Electrical requirements: 3-phase, 10 kVA, 200–220 V AC, 50/60 Hz, SCCR 2.5 kA Additional equipment • Rotary table FANUC DDR260iB with face plate • Special setup: DDR 4th axis horizontal • Lang Quick-Point round plate 96 adapted for FANUC DDR/DTT • Renishaw OMP40 3D spindle probe with OMI-2T receiver • Häberle coolant tank HK250 (250 l capacity) • External coolant pump 220 l/min with flow monitoring • Manual band filter Bwsdoylw Hdepfx Agkji • Chip tray with perforated plate • Commissioning of Häberle machine and coolant system included