Used Manufacturing Facility for sale (40,732)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: Ksdpfx Akezt Nbzs Uenb - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Year of construction: 1985, condition: used, functionality: fully functional, For sale: Auto Diesels / Dorman 12STCA diesel generator, approximately 730 kVA A powerful industrial diesel generator with a British Dorman 12STCA V12 diesel engine is for sale. This is a heavy-duty industrial generator set designed for electricity generation in industrial facilities, factories, construction sites, as a backup power source, or in other locations where high electrical power is required. Key specifications: Manufacturer/Assembler: Auto Diesels Engine: Dorman 12STCA Engine Type: V12 Diesel Speed: 1500 rpm Frequency: 50 Hz Generator: AC, 3-phase Voltage: Approximately 400/415 V Generator Power: Approximately 730 kVA Engine Power: Approximately 500 kW class Engine Serial No.: 12132/0785/005 Engine Manufacturer: Dorman Diesels, Stafford, England Kodpjz Du D Tjfx Ak Uonb Generator Manufacturer: Auto Diesels, Uxbridge, Middlesex, U.K. Operating Mode: S1 Ambient temperature according to generator plate: 40 °C The Dorman 12STCA was used in high-power industrial generators; documented 12STCA units in the 800–1000 kVA class are available on the market, so this unit belongs to the same heavy-duty industrial category. Package includes: Auto Diesels / Dorman 12STCA generator Dorman 12STCA V12 diesel engine Generator head / alternator Fuel tank Exhaust system Muffler Engine and generator control/starting equipment Main generator frame / platform Auxiliary equipment related to the generator The fuel tank and muffler are included in the package.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 203-654, controller model: Siemens S7-200, number of chambers: 1, usable tank capacity: 4,000 l, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be arranged by the buyer! The collection basin was renewed in 2022! TECHNICAL DETAILS Number of chambers: 1 Chamber volume: 4,000 l Cleaning agent: Surfaclean 936 or Surfaclean 980 Concentration: 5% Ultrasonic power: 2 × 2,000 W Ultrasonic frequency: 25 kHz Ksdpfx Ajzx S E Hsk Ujnb MACHINE DETAILS Control type: Siemens S7-200 Connected load: 75 kW Heating power: 57.5 kW Dimensions of the washing system: 1,900 × 2,800 × 1,700 / 3,300 mm with lifting device Dimensions of the collection basin: 3,600 × 3,300 × 400 mm Control voltage: 24 V DC EQUIPMENT Lifting device Lift truck with washing baskets Newly manufactured collection basin Ultrasonic cleaning Tools and fixtures Operating manual Wiring diagrams Maintenance history, partially available Note: The ultrasonic washing function was working during the last use. The lifting function for moving the container with the washing material did not function properly. The temperature control of the washing liquid did not function properly. The oil separation of the washing liquid did not function properly.

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A Ksdpfozzd Dmsx Ak Ujnb New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 395.900.219.1159, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, table length: 800 mm, overall weight: 4,150 kg, GF AgieCharmilles FORM E 600 – Die-Sinking EDM Year of manufacture: 2019 Operating hours: approx. 900 h The machine is in excellent, fully functional condition. It has been used only for a very limited number of test and trial operations and has never been used for continuous serial production. Technical specifications: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 800 x 600 mm Maximum workpiece size: 1,000 x 700 x 400 mm Maximum workpiece weight: 1,000 kg Positioning resolution: 0.1 μm Best surface finish: Ra 0.2 μm Generator current: 140 A Dielectric tank capacity: 650 l Integrated C-axis Maximum electrode weight on C-axis: 25 kg Maximum C-axis rotation speed: 80 rpm AC FORM HMI with 19" touchscreen ISPG (Intelligent Speed Power Generator) Glass scales on X/Y axes EROWA ITS-50 automatic chuck Electrode changer Fire protection system 6 integrated filter cartridges Power supply: 3 x 400 V, 50/60 Hz Compressed air: 6–8 bar LAN connection: 10/100 Mbit/s Machine dimensions / weight: Machine height: 2,700 mm Machine weight: approx. 4,150 kg The machine is currently located at our facility in Kocaeli, Turkey and is available for inspection. Additional photos, videos, and further information are available upon request. Knjdpszyn E Eofx Ak Usb

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: D510447, Year of construction: 2004, operating hours: 4,505 h, load capacity: 3,000 kg, lifting height: 3,540 mm, construction height: 2,800 mm, fork length: 1,140 mm, overall weight: 3,020 kg, TECHNICAL DETAILS Lifting capacity: 3,000 kg Lifting height: 3,540 mm Fork length: 1,140 mm Minimum fork width: 210 mm Maximum fork width: 1,160 mm Number of wheels: 3 Kedpfxozza S Te Ak Usnb MACHINE DETAILS Mast type: Duplex Fuel type: Diesel Engine manufacturer: Kubota Operating hours: 4,505 h Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,460 x 2,800 mm Unladen weight: 3,020 kg EQUIPMENT Side shift Partial cabin Pneumatic tires Work lights Documentation Operator's manual CE marking

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Knedjz Az Uvspfx Ak Ujb Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,850 mm, Manufacturer: FPT Year: 2007 CNC Control: HEIDENHAIN Axis Travels Ksdezznupepfx Ak Usnb X-axis: 7,000 mm Y-axis: 1,210 mm Z-axis: 1,850 mm Milling Head / Rotary Axes A-axis: 270° B-axis: -180° / +180° C-axis: 360° The machine is currently installed at our factory in Istanbul, Türkiye and is in working condition. The machine can be inspected under power at our facility. Further technical information, photos and videos can be provided upon request.

Condition: reconditioned (used), functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 CLH TB510 PROFESSIONAL FLOOR SCRUBBERS - 2300m²/h TECHNICAL DATA: Model: Scrubmaster B45 CLH TB510 Manufacturer: Hako Type: Compact scrubber Country of manufacture: Germany Series: Professional Condition: NEW Wheel drive: Yes Charger: Built-in Power supply type: Battery Battery type: Sonnenschein GF12105 V (12V 105Ah) Water tank type: AntiBac Number of brushes in the set (pcs): 1 Brush working width (mm): 510 Squeegee working width (mm): 860 Water tank: clean / dirty (l): 42 / 42 Theoretical surface coverage (m²/h): 2300 Weight ready for use (kg): 230 HAKO SCRUBMASTER B45 CL TB510 EQUIPMENT ANTIBAC TANK 380mm floor nozzle (spraying and collecting) 150cm tube with spray gun 5m suction tube for manual collecting nozzle 510mm medium-hard disc brush 860mm curved squeegee Oil-resistant squeegee rubbers 2x Sonnenschein 12V 105Ah batteries Built-in charger ADDITIONAL FEATURES IN THE CLH VERSION The AntiBac tank used in Hako machines is made of a material with antibacterial properties. This reduces the growth of bacteria and fungi inside the machine, improving hygiene and reducing unpleasant odors. This solution is particularly useful in areas with high sanitary requirements, such as hospitals and food processing plants, and also helps maintain the tank in better condition for longer. The device is equipped with a manual spray and collection nozzle, enabling wet cleaning of hard-to-reach areas in corners and nooks. The 5m hose provides high flexibility and comfortable mobility. This is an ideal solution for work in production facilities with narrow, hard-to-reach areas beyond the main aisle. The spray gun built into the suction tube allows for easy dispensing of cleaning solution from the machine's tank, which is then collected by the device's built-in suction turbine. Knedpfsy E Rvaex Ak Ujb

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) Knsdpfx Akezzn I Ae Uob 1 x Latz stretch wrapper The lines include various roller conveyors. The machines will be dismantled in week 38. TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Roller conveyors Latz stretch wrapper

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F20326Y00151, Year of construction: 2021, operating hours: 8,186 h, load capacity: 1,400 kg, lifting height: 4,810 mm, free lift: 1,630 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, No minimum price – guaranteed sale to the highest bidder! Note: The sale does not include a charger. TECHNICAL DETAILS Lifting height: 4,810 mm Free lift: 1,630 mm Lifting capacity: 1,400 kg Fork length: 1,190 mm Fork width: 560 mm MACHINE DETAILS Mast type: Triplex Drive: Electric Battery manufacturer / type: Kion / BTR-0023V-VL41M-SFP-002M Battery year of manufacture: 2024 Kedpfezza Ubjx Ak Uenb Battery voltage: 24 V Battery capacity: 410 Ah Battery tray length: 720 mm Battery tray width: 205 mm Battery tray height: 620 mm Operating hours: 8,186 h Dimensions & Weight Dimensions (L x W x H): 2,200 x 800 x 2,060 mm Overhead height: 2,065 mm Unladen weight: 1,500 kg EQUIPMENT Documentation available CE marking

Condition: excellent (used), Year of construction: 2021, Engel Victory 2460/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Injection Molding Machine / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2021 Injection unit: Screw diameter: 70 mm Shot weight: approx. 1,100 g Injection pressure: 2,000 bar Dosing volume: 1,212 cc Clamping unit: Clamping force: 260 t Tie bar distance: 0x0 mm Platen size: 1,100 x 1,000 mm Kjdjzy Itcopfx Ak Usnb Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – Touchscreen Additional equipment: Production line with Engel Viper 20 robot Machine in perfect technical condition Tie-barless hybrid machine: energy-efficient and very quiet Operating hours: approx. 10,000 in automatic mode Air valves x 5 Hydraulic core pull x 2 on the moving platen side Hydraulic core pull x 2 on the fixed platen side Injection unit is wear-resistant and corrosion-resistant Main drive of the machine: servo motor with inverter – energy saving Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Engel Viper 20 Robot Year of manufacture: 2021 6-axis robot: all 6 axes driven by electric servo motors: X, Y, Z, B, C Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 7.35 x 2.06 x 2.37 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center Kjdpoyzh Ulofx Ak Ujnb - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Condition: used, Year of construction: 2018, High-performance, fully automatic combination folding machine (AFC-744S) from the quality Japanese manufacturer Horizon International, Inc., bundled with the high-volume PFU-74D pallet feeder. The system is in excellent technical condition and is ideally suited for print shops and post-press facilities requiring maximum precision in B1 format with minimal setup times. Technical specifications of the main components: 1. Horizon AFC-744S Folding Machine (Cross Folder) - Sheet size range: Max. 738 x 1,100 mm (B1 format) | Min. 210 x 297 mm - Paper weights: 35 – 220 gsm - Max. production speed: Up to 40,000 cycles/hour (or 230 m/min belt speed) - Power requirements: 380/400/415V AC, 3-phase (f), 50/60 Hz, 2.8 A Kedpfoz Az D Tex Ak Usnb 2. Horizon PFU-74D Pallet Feeder - Model: PFU-74D (Pallet Pile Feeder) - Function: Automated sheet feeding directly from the pallet for non-stop production and maximum efficiency in large-format processing. - Benefit: Drastic reduction in physical strain on the operator and minimized downtime during stack changes. Highlights & Features: - Intelligent automation (Touch & Work): Fully automatic adjustment of fold plates and sheet guides via the central, intuitive color touchscreen display. No specialized technical expertise required for setup. - High flexibility: Rapid changeovers and recall of pre-programmed standard fold patterns, plus available memory slots for custom repeat jobs. - Outstanding folding quality: Precisely guided combinations of knife and buckle folding for flawless results, even with challenging paper stocks. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X352N00989, operating hours: 2,488 h, load capacity: 4,500 kg, lifting height: 6,925 mm, fuel type: diesel, mast type: triplex, construction height: 2,940 mm, fork length: 1,150 mm, TECHNICAL DETAILS Lifting height: 6,925 mm Knsdpfxozza T De Ak Uob Free lift: 2,330 mm Load capacity: 4,500 kg Fork length: 1,150 mm Fork carriage width min.: 240 mm Fork carriage width max.: 1,350 mm Number of wheels: 4 MACHINE DETAILS Mast type: Triplex Drive type: Diesel Engine manufacturer: Perkins Operating hours: 2,488 h Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,450 x 2,940 mm Unladen weight: 7,150 kg EQUIPMENT Semi-cab Work lights 3rd and 4th hydraulic valve for fork carriage Documentation available CE marking

Condition: used, functionality: fully functional, control type: manual, degree of automation: manual, actuation type: manual, sheet thickness (max.): 1 mm, Manual guillotine shear JÖRG 4111 with a robust, heavy-duty workshop construction. Designed for precise manual cutting of sheet metal. This machine is suitable for metalworking workshops, maintenance departments, small-series production, and vocational training facilities. Technical specifications: • Manufacturer: JÖRG • Model: 4111 • Machine type: manual mechanical guillotine shear • Maximum cutting length: 1,020 mm • Maximum cutting capacity in mild steel: 1.0 mm • Maximum cutting capacity in aluminum: approximately 2.0 mm • Manual operation – no electrical connection required • Robust, stable workshop construction • Compact design • New cutting blades installed The machine is used and shows normal signs of previous industrial use. Overall visual condition is good. Kjdpfx Akez Dqywe Ujnb A simple, reliable, and economical machine for straight cutting of sheet steel, aluminum, and other thin sheet materials. Internal reference: 48979-113 The machine is located in Latvia and is available immediately. Loading assistance is available. Transport within the Baltic States and to other European countries can be arranged upon request. The machine is sold as shown in the photographs. Inspection is possible by prior appointment.

Condition: new, functionality: fully functional, Year of construction: 2026, color: other, overall weight: 2,500 kg, loading space width: 300 mm, loading space length: 600 mm, Equipment: air conditioning, bathroom, cooling unit, hot water, lighting, shower, Hello, we are a manufacturer of: Pavilions Offices Apartments Sanitary facilities Food service facilities Made with the best polyurethane PIR insulation, 120 mm thick. We focus on very good insulation. We always have standard 6x3 containers in stock for use as offices. Floor: 120 mm thick polyurethane composite panel with a thermal transmittance of 0.18 W/m2K, plus an OSB panel and PVC flooring. Walls: Polyurethane composite panel, 100 mm or 120 mm thick, with a thermal transmittance of 0.22 W/m2K or 0.18 W/m2K. RAL 7016 anthracite. Roof: Polyurethane composite panel, 100 mm thick, with a thermal transmittance of 0.22 W/m2K. External and internal finishing in RAL 7016, but a wide range of decorative options are available. Window, dimensions 980 x 2000 – 1 piece. Opening window 900x1900 - 1 piece. Kjdez Drm Espfx Ak Usnb Aluminum glazed entrance door - 1 piece; dimensions 1100x2100. Electrical system: 2 lamps, 2 double sockets, 1 double switch, fuse box. Lead time: 2-5 weeks, depending on the specifications. IT IS POSSIBLE TO CREATE A CUSTOM DESIGN FOR WINDOW AND DOOR ARRANGEMENTS FOR AN ADDITIONAL FEE. AIR CONDITIONING BATHROOM Kitchen Wood interior Heating and many other options. Price for standard 6x3 unit. OTHER DESIGNS AND DIMENSIONS AVAILABLE. The quickest way to contact us is via WhatsApp or email. We always arrange transportation for our customers.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,803 h, load capacity: 3,000 kg, lifting height: 4,850 mm, free lift: 2,160 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 3,200 mm, motor manufacturer: ELECTRIC, gearing type: hydrostat, battery capacity: 625 Ah, remaining battery capacity: 85 %, battery voltage: 62 V, battery weight: 1,200 kg, fork carriage width: 3,350 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 405 X 220 X 305, rear tire type: cushion tires (black), rear tire size: 27 X 10 - 12, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,450 mm, total length: 2,400 mm, total width: 2,620 mm, color: red, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C3000ET | ELECTRIC | DUPLEX 4850 MM | 3350 MM WIDE FORK POSITIONER | FREE LIFT | FULL CAB | READY TO WORK ## ✅ FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a forklift that starts generating value from day one, rather than creating unexpected maintenance costs, this machine is the perfect choice. We are offering a fully inspected and work-ready Combilift C3000ET multidirectional sideloader. The truck has undergone a comprehensive technical inspection, complete servicing, and extensive operational testing. It is ready for immediate use in manufacturing facilities, warehouses, steel service centres, timber yards, and logistics operations. --- # ⭐ Key Features ✅ Fully serviced before sale 🛡️ Warranty included 🆕 Brand new super elastic tires 🔧 Excellent mechanical and cosmetic condition 🚀 Ready for immediate operation with no additional investment required 🎥 Live online video demonstration available 🚛 Worldwide delivery directly to your facility --- # 📋 Technical Specifications Manufacturer: Combilift Model: C3000ET Year of Manufacture: 2015 Load Capacity: 3000 kg Power: Electric Operating Hours: 8803 h Mast Type: Duplex Lift Height: 4850 mm Wide Fork Positioner: 3350 mm Fork Length: 1200 mm Free Lift: Yes Cab: Fully enclosed and heated Truck Weight: 6800 kg ### 📐 Dimensions • Height: 2450 mm • Length: 2400 mm • Width: 2620 mm • Overall Mast Height: 3200 mm ### 🛞 Tires Front: 405 × 220 × 305 Rear: 27 × 10 - 12 Condition: ✅ 100% Brand New --- # ⚙️ Equipment ✔️ 3350 mm Wide Fork Positioner ✔️ Fully Enclosed Heated Cab ✔️ Free Lift ✔️ Working Lights --- Knsdpfx Akjz Dwwpj Uob # 🏭 Ideal Applications 🌲 Timber and Wood Processing Industry 🏗️ Steel Mills and Steel Service Centres 🔩 Structural Steel Fabrication 📦 Handling Pipes, Profiles and Long Loads 🏢 Indoor and Outdoor Material Handling --- # 🤝 Why Choose FT LOGISTICS When you purchase from FT LOGISTICS, you are buying from a company specialising exclusively in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every machine undergoes a complete technical inspection, professional servicing, and performance testing before delivery. We maintain an inventory of more than 100 machines available for immediate delivery and supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # ✔️ We Provide 🔧 Full Pre-Delivery Service 🛡️ Warranty 👨‍🔧 Professional Technical Support 💳 Leasing and Financing Solutions 🚛 Worldwide Transport Arrangements 📄 Export Documentation and Customs Clearance 🤝 Comprehensive After-Sales Support --- # 🌍 Trusted Worldwide Hundreds of customers across Europe and international markets trust our machines and continue to return for future purchases. We can arrange: 🎥 Live Online Machine Demonstration 📷 Additional High-Resolution Photographs 🎬 Detailed Walk-Around Videos 🚛 Personalized Worldwide Transport Quotations --- # 🏢 FT LOGISTICS ## 🚜 Ready-to-Work Forklifts Delivered Worldwide 🌍 Quality. Reliability. Experience.

Condition: used, Year of construction: 2022, machine/vehicle number: LC653, Used Micro can CL10 filling line 4000 Cans per hourTechnical Specifications & Performance DataThis complete automatic canning line is a compact, engineered for efficient beverage production in aluminum cans. Manufactured by Micro Can, it integrates key bottling equipment into a cohesive, space-efficient unit suitable for industrial packaging environments. As a second hand, used bottling line, it offers proven reliability and excellent value for expanding or optimizing production.Line type: Complete automatic canning lineManufacturer: Micro CanMain module: Micro Can CL10 filler/seamerRated output: 4,000 cans per hourContainers: Aluminum cansFormats: Standard 0.33ml and 0.44mlFilling type: gravityAdvanced Automation & Control SystemsThe line is designed for streamlined operation with integrated control and coordinated infeed/outfeed logic between the depalletizer, filler/seamer, and labeling machine. Quick setup and simple recipe changes support efficient format adjustments. Operator-friendly controls, interlocked guards, and emergency stops provide safe, intuitive handling during routine operation and maintenance. The configuration minimizes interface risks and ensures stable synchronization across the complete packaging process.Production Line Integration CapabilitiesOptimized for inline operation, this second hand canning line connects upstream depalletizing to downstream labeling with harmonized conveyor handling. It is suitable for beverage production expansions, pilot facilities, or as a dedicated canning cell within a larger packaging plant. Designed for aluminum cans, it can be interfaced with upstream processing and downstream secondary packaging equipment as needed.Machine TypeManufacturer/ModelYearDepalletizerFilling MonoblockMicro Can CL10Labeling MachineWrap-around labellerMachine Condition & Maintenance HistoryThe line is offered as a complete, ready-to-operate unit. As a used bottling line, it has been configured for immediate deployment in industrial packaging environments, subject to standard site preparation and utilities. Overall condition is consistent with a professionally integrated second hand canning line built for dependable daily operation.Operational Performance & VersatilityWith a rated output of 4,000 cans per hour, the Micro Can CL10 filler/seamer delivers stable filling and precise seaming performance. The wrap-around labeling machine supports continuous production with consistent label application, and the depal... Knodpfxozkhtqo Ak Ujb

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: A06D, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: A06D, year of manufacture: 2006, maximum air pressure: 8.5 bar; MFR: 568 L/min; good condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Ksdpfx Aksz Dh Ulj Usnb Constructed of stainless steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Air Inlet Connection: 1/2" NPT Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price 5.190 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. Knodpszz Thbsfx Ak Ueb The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: used, Technical details: Kedpszgaiisfx Ak Uonb bore capacity in steel (diameter): 2-20 mm throat: 210 mm bore stroke: 100 mm Distance spindle/table max.: 450 mm range of revolution per miute: I : 450-1800 + II: 900-3550 / 4step U/min spindle taper MT: 2 table surface area: 340x280 mm total power requirement: 1,1 kW machine weight ab.: 165 kg transport dimensions LxWxH: 0,6 x 0,5 x 1,28 m Robust industrial drilling machine manufactured in the former East Germany by the "Fritz Heckert" Machine Tool Combine. Equipped with a 1.1 kW motor, 380 V three-phase power supply, and a machine weight of approximately 165 kg. Precision machine suitable for drilling, countersinking, and light reaming operations. Solid cast-iron construction, ideal for toolmaking, workshops, maintenance departments, and training facilities. *

Condition: new, functionality: fully functional, Year of construction: 2026, color: other, overall weight: 2,500 kg, loading space width: 300 mm, loading space length: 600 mm, Equipment: air conditioning, bathroom, cooling unit, hot water, lighting, shower, Hello, we are a manufacturer of: Pavilions Offices Apartments Sanitary facilities Food service facilities Made with the best polyurethane PIR insulation, 120 mm thick. We focus on very good insulation. We always have standard 6x3 containers in stock for use as offices. Floor: 120 mm thick polyurethane composite panel with a thermal transmittance of 0.18 W/m2K, plus an OSB panel and PVC flooring. Walls: Polyurethane composite panel, 100 mm or 120 mm thick, with a thermal transmittance of 0.22 W/m2K or 0.18 W/m2K. RAL 7016 anthracite. Roof: Polyurethane composite panel, 100 mm thick, with a thermal transmittance of 0.22 W/m2K. External and internal finishing in RAL 7016, but a wide range of decorative options are available. Window, dimensions 980 x 2000 – 1 piece. Opening window 900x1900 - 1 piece. Aluminum glazed entrance door - 1 piece; dimensions 1100x2100. Electrical system: 2 lamps, 2 double sockets, 1 double switch, fuse box. Lead time: 2-5 weeks, depending on the specifications. IT IS POSSIBLE TO CREATE A CUSTOM DESIGN FOR WINDOW AND DOOR ARRANGEMENTS FOR AN ADDITIONAL FEE. AIR CONDITIONING BATHROOM Kitchen Kodpfx Akez Drlhs Ujnb Wood interior Heating and many other options. Price for standard 6x3 unit. OTHER DESIGNS AND DIMENSIONS AVAILABLE. The quickest way to contact us is via WhatsApp or email. We always arrange transportation for our customers.

Condition: used, A fully operational metal processing company is for sale, complete with all production equipment, a customer base, and ongoing orders. This is more than just a sale of equipment – it’s the transfer of a thriving business with a current workforce of 6 employees. Production is uninterrupted; the company fulfills existing orders, operates on a subcontracting basis, and has secured future contracts through won tenders. The company boasts a modern equipment park, mostly from 2024-2026, allowing it to perform the entire main cycle of sheet metal processing: laser cutting of sheets and tubes, bending, laser and conventional welding, grinding, and other metal processing operations. Production Facilities The premises are rented under favorable terms: Production space: approximately 400 + 600 m² An additional second floor is available, offering approximately 800 m² for further expansion Overhead cranes are installed in the premises Low rental cost Main Production Equipment 2026 HN-6020 Sheet Metal Laser Cutting Machine Laser power: 12 kW Working format: 6000 × 1500 mm Metal thickness to be cut: up to 10 mm 2025 Hongnili Tube Laser Cutting Machine Raycus laser source Laser power: 3 kW Tube length: up to 6 m Wall thickness to be cut: up to 10 mm Kedsz A Rwaepfx Ak Uenb 2025 LEMANS B320/4 Bending Press Equipped with bending press tooling 2024 Hongniu HN-3000W Laser Welding Machine Power: 3000 W Other Production Equipment Automatic grinding machines for parts after laser cutting Bevel grinding machine Band saw Welding machines Various production tools and auxiliary equipment A significant stock of sheet metal is available in the warehouse Transportation and Handling Equipment Electric Jungheinrich forklift Diesel Linde forklift Volkswagen Crafter cargo van Included with the company: The entire operational company is for sale, including production equipment, an existing customer base, ongoing projects and orders, won tenders, subcontracting activities, a team of 6 employees, metal stock, transportation, and other equipment and tools necessary for production. This is an opportunity to take over an already functioning metal processing company and continue production immediately, without the need to build a production base and assemble equipment from scratch. We will provide more information about the company, equipment, and sale conditions upon request. The company and the operational production can be viewed in advance by appointment. I have not specifically mentioned the company name, location, and sale price here – it is quite logical in this type of advertisement to reveal some information only to a serious buyer. Once we have the exact names/models of the laser manufacturers and the parameters of the LEMANS press, we can further refine the technical details.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 1,590 mm, total height: 2,130 mm, total width: 1,610 mm, type of input current: AC, input voltage: 230 V, input current: 30 A, travel speed (max.): 6,000 mm/min, space requirement length: 2,000 mm, space requirement height: 2,500 mm, space requirement width: 3,800 mm, Array – Your Solution for Industrial 3D Printing Production Array is a scalable platform for additive manufacturing, designed for the production of end-use polymer parts directly on your shop floor. Featuring integrated robotics, intelligent software, and high-performance FFF printing, Array reduces labor costs, increases productivity, and delivers series-quality components—on-site and exactly when you need them. Your benefits: Efficient & Cost-saving: Automated processes reduce personnel costs Kedpfx Ajxl Ry Aek Uenb Fast & Flexible: High throughput for your production Industrial Quality: End products in series quality, available immediately Act now: Discover our pre-owned Array systems—inspected, reliable, and offered at attractive prices. ✅ Request your quote now ✅ Immediately available—fast delivery