Condition: good (used), Pre-pressing with foot pedal, program slots, cutting width 550 mm, cutting depth 570 mm, maximum stack height 95 mm. Max cutting width 550 mm Max stack height 95 mm (92 mm with clamp plate cover) Cutting table depth 570 mm Minimum cut 32 mm (60 mm with clamp plate cover) Fjlq Iewcw R Ssk Uyjpg Operating voltage 230V / 50Hz Dimensions 960 x 1400 x 1370 mm Weight 350 kg

Condition: ready for operation (used), Functionality: fully functional, 1 x CP Bourg BCMEx - CP Bourg BSR - CP BMEx - CP Bourg Squarefold - CP Bourg BSF 26 C.P. Bourg Inline Booklet Maker - BMEx for Nuvera Face trimming comes standard with the BMEx. Saddle, corner and top stitching is also supported. Operators can select top, edge corner, or saddle stitches (one, two or four stitches) from a simple menu on the BMEx control panel; choose a topstitch bypasshastening other finishing functions; make fine adjustments to stitch positions, fold positions, or trim distance in increments of 1/10 mm "on the fly" as the job is running. Up to 50 sheets (80 gsm) can be stapled. The BMEx can stack up to 50 booklets depending on the number of sheets per booklet. The conveyor can be unloaded Ready to go this Friday - ideal for Xerox streamlined booklet making both on- or off-line E.g. for: • Xerox iGen family • Xerox Nuvera family • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Inspection welcome Tested and working – under service all years and very well maintained. Fpjlq Iewf Ryxek Uyjg Only B2B sales Inspection welcome northern Germany

Condition: used, Year of construction: 2006, MBO Combination Folding Machine K 700/6 SKTL year 2006 Configuration: - round pile feeder R 700 - NAVIGATOR control - 6 folding buckles - 2 crossfold units - noise reduction hoods - vacuum pump - without delivery Special equipment: - additional buckle plate after 1st cross fold Technical specifications: mechanical speed: 10 - 210 m/min Folq Ik Uoi En I Aeyspg size range max.: 68 x 120 cm size range min.: 17 x 20 cm

Condition: used, Perfect Fry PFA 720/1 Electric Fully Automatic Ventless Fryer, Capacity 11 Litre, Oil Drain Tap, Fire Suppression System (Integral), Can Cook Up to 1.3kg Per Cycle, Self Venting, Replacable Hepa-Style Air Filtration. S/No. 021622PK Location: This lot is located in Birmingham, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fpelq Ikewhwdij Uyjg

Condition: used, Functionality: limited functionality, DUPLO DC 646 for cutting, creasing, and perforating Plan for a complete overhaul (or possibly for parts) Sold as is with various cassettes Equipment in limited use Felq Ik Uswgddaoyspg

Condition: good (used), Banding machine TP-601 D1 Folq Ik Ujv Rrmxeyopg The machine is operational, ready for production. Producer: M.J Maillis Sander Simple controls. An indispensable device on expeditions, for packing heavy parcels, e.g. with leaflets or catalogues. A strip of PP tape strengthens the packaging and additionally creates a handle that allows us to easily grab and transport the package. Adjustable tension force. Goal size 850x600mm Strap width 10mm Power supply 230V Weight 200kg

Year of construction: 2006, Condition: good (used), machine/vehicle number: 051, Mechanical Speed : 40 Cycles/Min Fjlqjhrx U To Ik Uyopg Max. Size : 390 x 670 mm Min. Size : 140 x 205 mm

Condition: ready for operation (used), Functionality: fully functional, 1 x Watkiss Nearline Powersquare 224 - booklet making for Xerox digital printers Ready to go this Friday - ideal for Xerox streamlined booklet making both on- or off-line Counters: Folq Ik Ujwf Rxujyspg 1.Books: 1,109,917 2. Sheets: 8,905,801 3. Stitches: 2,735,224 E.g. for: • Xerox iGen family • Xerox Nuvera family • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Inspection welcome Tested and working – under service all years and very well maintained. Only B2B sales Inspection welcome northern Germany With manual in English.

Condition: used, Year of construction: 2003, HEIDELBERG Stitching Unit HM 400 Fpslqeqpwcgs Ik Uysg year 2003 Standard equipment: - without stitching heads Technical specifications: compatibel with: HEIDELBERG ST 400 saddle stitcher

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, We are selling several hotmelt stations from Huangsang. This system is almost as good as new and was only used briefly for a project. Data: Model: HS808A Capacity: 10 l Operating voltage: 220 V Power: 2300 W Temperature: 200 °C Weight: 61 kg Year of manufacture April 2020 _____ Model: HS808A Capacity: 10 l Operating voltage: 220 V Power: 2300 W Temperature: 200 °C Weight: 61 kg Fpolqerzauzj Ik Uyeg Year of manufacture September 2020 _____ Model: HS2199 Capacity: 10 l Operating voltage: 220 V Power: approx. 4000 W Temperature: 200 °C Weight: approx. 125 kg Year of manufacture 2020 More detailed information on request. Please contact us!

Condition: good (used), Year of construction: 2007, working width: 566 mm, Horizon AFC-566FKT with 6 buckle +1 knife crossfolder + 2 buckel folder under the knife The machien was checked by our Horizon service department Fpelq Ik Uotxzr Rjyog The machine is used, every function working well. Optionally we can renew the folding rollers.

Condition: good (used), Ideal 8324 folding machine Japanese production machine. The condition of the machine is very good, like new. Efficient folding machine designed for A4 format. Equipped with a convenient knob to set the type of folding. Fpslq Ik Uev Rrimsyeg folding speed: up to 7,000 sheets per hour minimum paper weight: 65 g/m2 maximum paper weight: 130 g/m2 minimum paper size: A6 maximum paper size: A4 Other parameters: ways of folding paper: standard letter (in 2), in a „Z” (in 3), single (in 2), parallel double (in 4) digital counter: Yes auto power off after job done: Yes automatic shutdown when lid is opened: Yes optical and audible paper jam indication: Yes

Condition: good (used), Year of construction: 1986, machine/vehicle number: 86109548, infeed width: 430 mm, Mobile, self-controlled 16-pin control connector with adapter cable for 16/24 control connectors Height adjustable Fpjlq Iewc T Sljk Uysg Rotatable 180 degrees

Condition: good (used), Year of construction: 1995, We request your binding offer. Delivery terms: ex works – EXW (North Rhine-Westphalia) Payment terms: Payment before collection Fpelq Ik Uewgadpsyeg Accessories are not guaranteed. The following applies: "Item sold as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 2003, HEIDELBERG Trimmer TR 400 year 2003 Standard equipment: - without knives Technical specifications: compatibel with: HEIDELBERG ST 400 saddle stitcher Fpslq Isqqxttjk Uyog

Condition: used, Year of construction: 2005, Perfect binding line Kolbus KM 473 Year: 2005 Consisting of Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 - ATC thickness control - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element - Transfer into the binder - Pump(s): Becker Aircenter Perfect binder Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station Folovuz Dheq Ik Uyopg - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Solema Description: - Transport system, length (approx): 45 - Escape delivery Conveyor tower Solema Drying station 25 Year: 2005 Book saw Solema 20 Year: 1998 Description: - Right hand infeed - 1 saw blade - Belt delivery with turning conveyor Three knife trimmer Kolbus HD 142.P Year: 2005 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Rima XRS 130 Year: 2005 Description: - Compensating stacker - Delivery to the left and right Note: Solema book block feeder shown on the photos is not included in the price!

Condition: like new (used), Folding machine Sofrapli 505 ABN The machine is in very good technical and visual condition. The device has 2 pockets, pneumatic feeding, counter with the function of packing, total counting and folding speed indicator. Included with the machine are deflectors and brand new creasing rollers. 230V power supply. Ritschle compressor Extended electric delivery. Non-stop feeding with vacuum roller from below. A2 + format The weight of the processed paper – 40 – 240gsm Productivity, A4 / hour – up to 30,000 Fslq Isv Rrh Nsk Uyjpg

Condition: good (used), Year of construction: 2006, volume flow: 80 m³/h, Flow rate 80 m3/h Fjlswc T Rzeq Ik Uyjpg Compressed and suction air 0.60/0.70 4.8 kW

Condition: good (used), Year of construction: 1990, We request your binding offer. Fpjlewgadceq Ik Uyjg Delivery conditions: ex works – EXW (North Rhine-Westphalia) Payment conditions: Payment before collection Accessories are not guaranteed. The following applies: "Item sold as seen." The prospective buyer must verify the completeness of the item on site.

Condition: new, KOLBUS Milling Head for micro-notching 00414598 Configuration: - brush 00414574 Technical specifications: KOLBUS no.: 00414598 (milling head) KOLBUS no.: 00414574 (brush) MULLER MARTINI no.: R041.4574.5 (brush) compatible with: KOLBUS perfect binder KM 410, KM 411, KM 412, KM 413 Spare Part Number: 00414598 Fpelqswa I Suj Ik Uysg Quantity: 1

Condition: used, Year of construction: 2013, Perfect binding line Kolbus KM 200 + HD-HD 143 Year: 2013 - 2017 Consisting of Perfect binder Kolbus KM 200 Year: 2013 Description: - Book block feeder - ATC thickness control - End sheet tipping unit - 2 feeding stations - Hotmelt - Premelter - Transfer into the binder - Automatic setting - Co-Pilot with touch screen - Kolbus AFS 702.W, excl. license. (remote diagnostics) - Number of clamps: 26 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.B - Base for side glue system - Hotmelt side glue unit, interchangeable (nozzle) - Premelter for side glue unit - Gauzing station - Heating elements in curve - Rotary cover feeder - Scoring station: 4 - Pump(s) - Nipping and pressing station - Lay down device (to the left) Transport system Kolbus Year: 2017/2013 Description: - Transport system, length (approx): 35-40 mtr - Escape delivery Three knife trimmer Kolbus HD-HD 143 Year: 2017 Product counter: +/- 6 mio Description: - Automatic setting Felq Ik Uovc Duxeyspg - Co-Pilot with touchscreen - Right hand infeed - Cut counter - Knife pre-setting device - Sets of knives: 2 Book stacker Kolbus KL 501.D Year: 2017 Description: - Automatic setting - Compensating stacker - Delivery to the left and right

Condition: like new (used), Automatic feeder Mathias Bauerle Loader Fpjlq Iov Rrh Ask Uysg The device is in very good condition. Production Germany. Feeding on tranport belts. The possibility of adjusting the extension of the „tail” The adjustable height of the device allows the attachment of the feeder to each machine.

Condition: new, KOLBUS Strip Cutter 12475396 Configuration: - 30 knives 12475399 Technical specifications: KOLBUS no.: 12475396 (strip cutter) KOLBUS no.: 12475399 (knives) Felqowa I I No Ik Uyjpg MULLER MARTINI no.: R247.5396.5 (strip cutter) MULLER MARTINI no.: R247.5399.5 (knives) compatible with: KOLBUS perfect binder KM 600, KM 610, KM 411, KM 412 Spare Part Number: 12475396 Quantity: 1

Condition: used, KOLBUS Dust Rougher 12453324 Configuration: - 18 knives Technical specifications: KOLBUS no.: 12453324 MULLER MARTINI no.: R245.3324.5 compatible with: KOLBUS perfect binder KM 600, KM 610, KM 411, KM 412 Condition Details: Like new Spare Part Number: 12453324 Quantity: 1 Fpjlowa I Icoq Ik Uyog

Condition: used, Year of construction: 2007, MULLER MARTINI Stream Feeder UNIVERSAL 3738 year 2007 Stream feeders are used to automatically feed logs of previously bundled signatures to a gathering machine. Fslq Ik Uet Uzpyoyspg Standard equipment: - with extension (up to 6 pieces available) Technical specifications: compatibel with: MULLER MARTINI ZTM 1571, 3681, 3693, 3694, 3695