Used Powder equipment for sale (74)

Condition: good (used), Year of construction: 1990, functionality: fully functional, The complete conveyor technology is supplied by CSF. The control system for all plant components, including visualization, all control cabinets, all frequency converters, as well as many other components, were completely renewed over the past 5-7 years. The plant was decommissioned in Q1 2025 but can be restarted at any time if required. All plant components are on standby and can be immediately put into operation and demonstrated to any interested party. The plant is equipped with one manual and two automatic booths. Through all booths, parts with overall dimensions of up to 7000x2300x800 mm can be coated. A full description can be provided upon request. Price on request! Knjdow Ek Ntepfx Aaboc

Condition: used, functionality: fully functional, Conveyor systems for powder coating line. Total length approximately 75m. The system has been neatly dismantled. Video available of it in operating condition. 380V With frequency inverter. *Note: this listing is for the conveyor system only. Knodpfx Aaoxaz Erebec

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat glass and laminating line for flat glass or other materials Glass size max.: Length 3600mm x width 2600mm. Knsdpfxstwn Ipe Aabsc 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Glass Lift Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with glass Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station with Glass Lift Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the glass washing machine

Condition: used, Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 300120-03-DE, total length: 4,170 mm, total height: 2,318 mm, total width: 2,374 mm, power: 54 kW (73.42 HP), inner dimension length: 3,200 mm, inner dimension width: 2,000 mm, inner dimension height: 1,920 mm, energy consumption: 54 kWh, Powder coating system with the following components: - Oven Ksdpfx Ajw Tcpajabsnc - Extraction - Wagner gun - Paints

Condition: used, Year of construction: 2014, functionality: fully functional, workpiece height (max.): 1,500 mm, workpiece length (max.): 7,000 mm, Linija za elektrostatsko plastificiranje aluminijumskih profila – skoro nova, potpuno ispravna i spremna za preuzimanje Prodaje se kompletna automatska linija marke NYS Equipments Co., Ltd., vrlo malo korišćena i u odličnom tehničkom stanju, koja se i trenutno nalazi u komercijalnoj proizvodnji. Linija je idealna za obradu aluminijumskih profila maksimalnih dimenzija 7.000 x 300 x 1.500 mm (DxŠxV) i kapacitetom do 15 nosača/h. Osnovne tehničke karakteristike: ✅ Proces: automatsko elektrostatsko nanošenje praha sa 16 automatskih i 4 ručna pištolja (Corona tip) ✅ Peć za polimerizaciju: gasno grejanje (RIELLO) kapaciteta 700.000 kcal/h, PID kontrola temperature sa preciznošću ±2 °C, unutrašnje dimenzije 11,1 x 7,8 x 2,59 m ✅ Sušara: gasno grejanje kapaciteta 200.000 kcal/h, unutrašnje dimenzije 8,0 x 1,5 x 2,3 m ✅ Transportni sistem: dupli lanac, razmak između nosača 2.250 mm, pogonski motor 3,75 kW, automatska kontrola brzine (0–6 m/min), sistem automatskog podmazivanja ✅ Reciklažni sistem praha: ciklon + after-filter sa automatskim vibracionim sitom, kapacitet ventilatora do 19.263 m3/h, filtracija 24 filtera (long fiber), automatsko čišćenje reverznim vazdušnim mlazom ✅ Kontrola: PLC sa touch-screen komandnim panelom, kompletan nadzor i kontrola procesa (kretanje transportera, temperatura peći, reciklaža) Pogodnosti: – Linija spremna za preuzimanje „viđeno–kupljeno” (it is, as is, where it is) – Mogućnost probe i obuke osoblja pre preuzimanja – Demontaža i transport nisu uključeni u cenu, mogu biti organizovani na licu mesta Cena: 100.000 € ENGLISH: Powder Coating Line for Aluminum Profiles – Almost New, Fully Operational and Ready for Sale We are offering a complete automatic powder coating line by NYS Equipments Co., Ltd., very lightly used, fully operational, and currently in commercial production. This line is ideal for coating aluminum profiles up to 7,000 x 300 x 1,500 mm (L x W x H), with a production capacity of up to 15 jigs/hour. Key Technical Features: ✅ Process: Automatic electrostatic powder coating with 16 automatic and 4 manual corona-type guns ✅ Curing Oven: Gas-fired heating (RIELLO), 700,000 kcal/h capacity, internal dimensions 11.1 x 7.8 x 2.59 m, PID temperature control with ±2 °C precision ✅ Drying Oven: Gas heating (200,000 kcal/h), internal dimensions 8.0 x 1.5 x 2.3 m ✅ Conveyor System: Dual chain design with adjustable jigs (2,250 mm spacing), automatic lubrication, and drive motor of 3.75 kW with adjustable speed (0–6 m/min) ✅ Powder Recovery System: Cyclone and after-filter recovery system with automatic vibrating sieve and 24 long-fiber filters. Fan flow rate up to 19,263 m3/h, automatic reverse air cleaning ✅ Control System: PLC with touch-screen interface, fully automated monitoring and control of spraying, curing, and recovery. Additional Advantages: – Currently in commercial operation, available for inspection and staff training – Sale is “as is, where it is” Ksdpfx Ajwvaaisabsnc – Disassembly and transportation are not included, but can be organized on-site Price: €100,000

Condition: new, Year of construction: 2024, Povder sieve Model SV-200 Knedpfxobwh S Se Aaboc Screen type stand Mesh 149 µ External dimensions 700 x700 x1200mm 220-240V voltage Power Consumption 40W Performance ~ 20kg/5min Frequency of 50Hz Tank with fluidisation

Condition: new, Year of construction: 2024, Basic info: • Intuitive 7" touchscreen display on the rotating applicator head, with convenient position lock • Up to 20 user programs • 3 automatic programs: flat, hard-to-reach surfaces, repainting • Handle and foot for easy transport in the paint shop • Gun rest handle prevents the gun from falling off the applicator • Powder cable holder prevents damage and optimizes powder flow to the gun • Accessories drawer - nozzles and spare parts • Attractive, modern design • Quick color change with collection directly from the box Knodpfxeflpi No Aabec • Automatic cleaning function - gun blow-off • Remote control of paint amount and program changes from the handle level • A complete set of hoses included; 6m - antistatic hose • Stand with vibrator and suction unit with fluidization Additional info: • Powder consumption up to 200g/min • Air consumption up to 200L/min 6 Bar • Air quality / water vapor - less than 1.3g/nm 3 • Air quality / oil - less than 0.1mg/nm3 • ATEX compliance 2mJ

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system with workpiece size L6500mm, W1500mm, H2200mm New price approx. €800 000. Kedpfx Aevdlfzeabjnc

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Kjdpfx Aoggyigsabjnc Advantages: - Easy to Use - Quick Color Change - Easy assembly and disassembly - Cleaner environment

Year of construction: 2020, condition: new, Pneumatic connection 1 " • Controls 7 "color touch panel • Paint tank capacity 6-7 kg • Air consumption during painting 15Nm3 / h • Air consumption for cleaning 350Nm3 / h • Hopper paint level sensor Yes • Ultrasonic screener Yes • Powder injectors up to 12 pcs Description • RP-01 pump for topping up the paint with fresh paint from cardboard • Two modes of operation, paint recovery with mixing or total waste • Sealed fluidization paint hopper • Automatic program for cleaning the tank and injectors with compressed air • Hopper powder level sensor assembly • Automatic refilling of the tray with paint from cardboard • Paint level sensor in refill box • An audible alarm alerts the operator when there is low paint in the box • The center is connected with the cabin control via ModBus protocol • Programmable powder suction valve to keep the powder center clean Ksdpefz Dkgofx Aabenc

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 Ratings ✈️ Free shipping : 25 days delivery ✈️⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✅MC 9 ►Number of filters: 9 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 4500 m3/h ►Electric motor power: 3 KW / hour ⭐Offer Price €6,000 EXCL.SHIPPING*⭐ ✅MC 17 ►Number of filters: 17 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 6500 m3/h ►Electric motor power: 5.5 KW / hour ⭐Offer Price €6,850 EXCL.SHIPPING*⭐ ✅MC 26 ►Number of filters: 26 Kedjggx E Djpfx Aabenc ►Filter dimensions: 2500 * diameter 160mm ►Suction power: 8500 m3/h ►Electric motor power: 7.5 KW / hour ⭐Offer Price €9,000 EXCL. SHIPPING*⭐ ❗❗❗Apply dozens of colors in your cabin.❗❗❗ ► Would you like to reuse the sprayed paint ❓ In this case, in filtered booths, you need to use different filters for each color. If you use a monocyclone you save on filter costs and can easily reuse the sprayed paint. ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocyclone. This way you don't have to resort to different filters when using dozens of different colors. ✳️Why a monocyclone ❓ ✨1 - According to the opinion and advice of environmental controllers, it is the better choice. Because a monocyclone does not need a connection for a trigger. ☘️ ✨2 - A monocyclone ensures occupational safety.⚠️ In the event of a filter breakdown in filter cabins, the ventilation ducts can be blocked with powder paint. This blockage can cause a fire. Mono cyclones avoid this possibility. ✨3 - Green Technology. ♻️ Drilling your filters into filter booths creates a situation where paint is sprayed into your paint shop. Your workshop gets dirty and paint particles fly into the air you breathe. The mono cyclone reduces the pollution in the paint shop and provides a better ecological environment for the health of the employees and for the environment. ✨4 - Provides quick color change⌛ This saves time and paint, as the booth can be cleaned quickly. ✨5 - Economical☀️ The mono cyclone bag filters do not require color changes. It offers reusability with its washable feature. ✍️✍️Order the right mono cyclone for your current cabin now. ⚡️⚡️⚡️Our mono cyclones have their own control panels. They are supplied with 2 suction funnels, suction hoses and connecting clamps for connection to your existing filter cabin. ‍⚕️‍⚕️‍⚕️ ►►You can easily mount your mono cyclone with 2 holes on the back wall of your filter cabin. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Kedpfx Aefz I Rxeabonc Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ €1750 EX. VAT (transport costs on request) ►►Buy It Now◄◄ This product is only sold outside Europe. ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ✨Sprays all powders with ease, coats complex geometries with outstanding efficiency and quality, and gets it done in the toughest of environments. This paint gun set is designed with stronger and more stable structure. ✨Works with any powder: Today you are faced with the challenge of spraying a wide variety of paints and chemicals. PROTON CLASSIC gives you the power and control you need to get the best possible finish from any powder. ✨Optimal ergonomics: The lightweight, ergonomically designed gun offers better balance and feel in hand, allowing you to position it comfortably for better coverage and faster coating. ✨Regardless of the conditions: No matter where you are, you will be new to the Coat PROTON CLASSIC perfectly. Whether in the heat or cold, PROTON CLASSIC delivers under dry or damp conditions excellent functionality and performance for any required coating environment. ✨These devices can take a beating... Industrial pistol design from a single source, Die-cast pump and carriage in steel construction ensure unparalleled toughness and durability in each withstand the coating environment. All equipment is new, not used. Do you want a special configuration ❗ Call us now❗ ✅WE OFFER SPECIAL SOLUTIONS, NOT JUST STANDARD SIZES.✅ ✅WE DESIGN, PRODUCE AND INSTALL SPECIALLY FOR YOU.✅ ☀️ 2 YEAR WARRANTY ☀️ *This product is only sold outside Europe. Knedpsc Utdrjfx Aaboc

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Kodof Aad Nspfx Aabonc Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️ 25 day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! PLUS VAT. & SHIPPING ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder booth – BOOTHLINE1200 - FL ✔️ Internal dimensions: 1130 mm L * 1250 mm W * 1450 mm H ✔️ 2 Flanged polyester filter ✔️ Ø325*1000mm filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable hanging device. ✔️ 1 PC 2.2 KW suction fan - 4500 m3/h ✔️Cab construction The powder booth is designed for manual application of the powder coating in an electrostatic field. The spray booth is made of powder-coated galvanized sheet iron. The interior and exterior of the cabin construction is coated with electrostatic powder paint [RAL 7024 MX - RAL 7047]. All parts of the powder booth are easily assembled with bolted connections and, if desired, easily disassembled. ✔️Suction system It is a system that prevents powder paint from leaking out of the booth and causing pollution when painting in the booth. The extraction system has been specially designed for each booth to ensure excellent extraction. Kjdpfx Ajdhi Aaoabenc Thanks to the suction system, the personnel applying powder coating are not affected by the paint. ✔️Filtration system The dust particles in the air extracted by the suction fans are held in the cab by fleece filters for long-lasting filtration, and filtered air is discharged from the exhaust stack. The filters separate the powder from the air by passing the powder/air mixture through the outside of the filter through a filter layer that keeps the dust and permeates the air. As filtration continues, dust accumulates outside the filter, increasing dust holding efficiency. The filter size is 330x1000, the surface is 9-10 m2. ✔️Powder recovery The powder paint applied in the booth is collected in the paint powder compartment at the bottom of the booth and can be reused manually. As an option, an automatic paint screen can be installed instead of the booth compartment. This screen collects the paint with the vibration motor from the booth and transfers it directly to the spray gun. ✔️Conveyor or suspension It can be integrated with bar transfer conveyor systems. In the models with eyelets, the product can be guided into the cabin with a suspension. Standard models feature a 360 degree rotating and articulating hanger. The price shown is for the smallest standard version. All devices/machines are new, not used. Do you want a special configuration ❗ Call us now❗

Year of construction: 2020, condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Ksdpjfz Nakjfx Aabonc Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Condition: new, ⭐⭐⭐⭐⭐ Rated 5.0 – Technology that inspires! ⚡ Top service – Fast delivery – First-class support! ⚡ ✈️ Delivery in just 45 days guaranteed! ✈️ ✅✅✅ Energy efficiency class A+++ – sustainable & economical ✅✅✅ 🤖 PCR-MA – 1800 Single-axis automatic powder coating robot – compact, precise, reliable! Scope of delivery: 2 robot arms + 1 touchscreen control unit Kjdedhi Uxepfx Aabjnc ⚙️ Technology that does the work for you: 🟢 Robot control via 7-inch touchscreen PLC – intuitive operation 🟢 Position measurement via encoder for high accuracy 🟢 Product-specific memory function – perfect for series production 🟢 Ideal for simple, linear motion sequences 🟢 2 powerful robot arms for consistent, automatic coating 🟢 Encoder-controlled position measurement for precise motion sequences 🟢 Separate setting of working ranges and speeds (in cm and Hz) 🟢 Live monitoring of range, speed, and position on the display 💡 Ideal for series production with changing geometries! 🔁 Do you need more axes? 🚀 In addition to our single-axis model, we also offer: 🔹 2-axis robots 🔹 3-axis robots 🔹 6-axis robots for complex geometries & maximum flexibility 📩 Inquire now about prices and our current catalog! 💸 Maintain your liquidity – we make it possible! ✳️ Flexible financing options: leasing, hire purchase, warranty programs 📞 Contact us today – we'll provide you with personalized, project-specific advice! ✨ Buy directly from the manufacturer – no middlemen involved! ✔️ 40 years of experience in surface coating ✔️ Made by PROTON Maschinenbau GmbH ✔️ Customized solutions available upon request 🌱 Sustainable technology with a future ☘️ Environmentally friendly design ☘️ Energy-efficient operation ☘️ Compatible with green energy 🎯 Inquire now or order directly – secure your automation advantage with PROTON!

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). Kjdoflmdwopfx Aabjnc - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! Kedsdy E A Sjpfx Aabenc 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup 🔄 High-Efficiency Recycling Technology Only 4% material loss Maximized powder reuse Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning Knodpfx Aaefz Dttoboc • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Condition: new, Year of construction: 2025, functionality: fully functional, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Price includes shipping within Germany – No additional shipping costs! ✈️ Fast delivery: Only 4 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Want to expand your business and enter the world of professional powder coating? Mini-PB-MAT is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨THE UNBEATABLE OFFER – ONLY UNTIL THE END OF APRIL!✨ Instead of €25,500, now only €16,765 PLUS VAT. Ksdpfx Asv Rb E Dsabjnc Take advantage of this limited-time offer before it's too late! * With an additional shipping fee of €750, we can ship throughout Europe. For other countries worldwide, please inquire about the shipping price difference. * Brand new, professional industrial product PROTON QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use! ✅ 100% European manufacturing – Not made from Chinese goods, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! ✅ All spare parts included – Long-term use with no hidden additional costs! ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder furnace + powder booth + powder gun Complete starter kit - MiniPB-MAT ⭐ Powder furnace with electric heating ✔️ Internal dimensions: 1000 mm L * 1000 mm W * 1000 mm H ✔️ Electric heating output: 12 kW/h ✔️ Fan: 1,500 m3/h 80 mm SS ✔️ Recirculation fan output: 0.75 [kW/h] ✔️ Total 14 kW/h +- %10 ✔️ Digital heat control with continuously adjustable temperature up to 220°C ✔️ Sandwich panels: Interior: 1.2 mm galvanized steel, exterior: 1.2 mm powder-coated steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 ⭐ Powder booth ✔️ Interior dimensions: 1200 mm L * 1200 mm W * 1450 mm - 2220 mm H ✔️ 1 polyester filter ✔️ Filter dimensions: 325 x 725 mm. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder recovery container: 30 liters ✔️ 360-degree rotating and movable suspension system ✔️ 1 x 1.5 kW extraction fan - 2500 m3/h ✔️ Control panel: 1 ✔️ Lighting ⭐ Powder coating gun - STRONG ELITE MULTICOLOR Effortlessly coat with all powder colors, coat complex geometries with outstanding efficiency and quality, and do so in the most challenging environments. Inquire now - Prepare your business for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certifications for all our machines and ATEX certifications for the necessary machines.☀️ Options (for ovens, spray booths) are available for an additional charge. All equipment/machines are new and unused.

Condition: new, ⭐⭐⭐⭐⭐ ✈️ 15-day delivery ✈️ Shipping möglich✈️ ✅✅✅Energy class A+++✅✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ➖➖➖➖➖ *plus VAT, plus shipping ►►Immediate purchase◄◄ ➖➖➖➖➖ ✳️Behalten Protect your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-purchase, warranty or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰FASTEST delivery time❗ ⌛⏰►►► Device features ► Touch operating elementsIndustry 4.0 ► Digital operating instructions in 4 languages ► Possibility to save 100 different operating parameters Wi-Fi connection and remote access ► 32-bit Cortex 18 ARM microprocessor 600 Mhz128 RAM ► 7'TFT touch screen 17.17 M colors Ksdpfxstpxpfs Aabenc Ergonomic body design ► Robust, explosion-proof fume cupboard structure ► Nozzle types for different coating styles ► Injection-molded cascade structure with increased tightness IP 6x ► 420 gr. Easy to use due to its light weight ⚡️⚡️⚡️Es is ATEX certified.⚡️⚡️⚡️ ➖➖➖➖➖ ☘️Umweltfreundlich☘️⚡️Grüne Energie⚡️☘️ ☀️ 2 YEAR WARRANTY ☀️ ☀️Wir have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ✅Twinline-MA Automatic Powder Coating Booth - Perfect Coating, Fast Color Change✅ The Twinline-MA powder coating booth from Proton Maschinenbau was developed for automatic and manual application in an electrostatic field and impresses with its efficiency, user-friendliness, and outstanding coating results. Kodpfxeggyk Ee Aabsnc ✅Innovative design for quick cleaning: Thanks to the insulating PVC floor and the automatic floor cleaning system, dust accumulation is effectively prevented. The booth can be cleaned quickly and easily without entering – for maximum productivity with minimal effort. ✅Intelligent airflow for maximum efficiency: Fulair technology ensures targeted air extraction at the inlets and outlets. This prevents powder loss into the environment and guarantees ideal conditions in both manual and automatic coating areas. ✅Effective powder recovery: The monocyclone with a downstream filter system enables a high powder recovery rate. The filters are automatically cleaned using compressed air, significantly reducing maintenance requirements. ✅Robust and flexible construction: The booth construction is available in powder-coated steel, stainless steel, or entirely made of PVC. The solid construction with no moving parts ensures a long service life and low maintenance costs. ✅Fast integration, short installation time: Twinline-MA can be easily integrated into existing systems and minimizes downtime. All system components are optimally arranged and offer the operator easy access at all times – whether during operation, color changes, or maintenance work. With the Twinline-MA booth, you are investing in speed, quality, and reliability. Experience a modern powder coating system that sets standards! Inquire now – Make your company fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ ✈️ 15-day delivery ✈️ Shipping available ✈️ ✅✅✅Energy class A+++ ✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ►►Buy now◄◄ ✳️ Maintain your cash flow! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST DELIVERY TIME❗ ⌛⏰►►► The microprocessor-controlled motherboard and AOS (Automatic Optimization System), the innovative housing design, the easy-to-clean plastic container, the lightweight carrier, the 4-mode memory option, the RS485 Modbus communication, and the LED warning system for network errors provide users with an enhanced experience. The automatic optimization function ensures that operations are performed with optimal performance, while the robust structure and portability also stand out. The RS485 Modbus communication and the LED warning system increase system reliability through reliable data transmission and fast error detection. This integrated system, tailored to modern computing requirements, offers a solution that is both practical and powerful, ensuring compatibility with technology. ►Ergonomic body design ►Robust, explosion-proof trigger structure ►Nozzle types for various coating styles ►Injection-molded cascade structure with increased sealing IP 6x ►420 g. Easy to use due to its light weight ⚡️⚡️⚡️It is ATEX certified.⚡️⚡️⚡️ ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ☀️ 2-YEAR WARRANTY ☀️ Knedofvqgkopfx Aabsc ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ PROFESSIONAL POWDER COATING HAS NEVER BEEN SO EASY! Mini-PB-MAT 4 is the perfect solution for beginners! This powerful system enables efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! * Your net price for businesses: €26,830.00 * Powder booth filter included. * Brand new professional industrial product PROTON QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use! ✅ 100% European manufacturing – Not made in China, but the highest quality according to European standards! ✅ Modular & expandable – Additional options for more performance and flexibility! Take advantage of this limited offer before it's too late! ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Powder furnace + powder booth + powder gun + transport cart for curing furnace Complete starter kit - ⭐ MiniPB-MAT4 ⭐ ⭐ Powder furnace with electric heating - MATOVENB-151830 ✔️ Internal dimensions: 3000 mm L * 1500 mm W * 1800 mm H ✔️ Electric heating capacity: 42 kW/h ✔️ Fan: 3,000 m3/h 80mm SS ✔️ Recirculation fan power: 1.5 [kW/h] ✔️ Total 45 kW/h +- 10% ✔️ Digital heat control: Continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.2 mm galvanized steel, outside: 1.2 mm powder-coated steel ✔️ Curing temperature, curing time, and exhaust fan function are adjustable ✔️ A beep sounds at the end of the curing time ✔️ Insulated door with special locking systems ✔️ Insulation: 150 mm (50 mm rock wool and 100 mm fiberglass) ✔️ Control panel: 1 *Our powder coating ovens are suitable for a ceiling rail system. If you would like to use this option, please contact our sales department. The housing shape of the ovens with ceiling rail differs slightly from the standard version. The ovens can be operated with either a floor-mounted trolley or a ceiling rail system. ⭐ Powder Booth - MATBOOTH.FT-04 ✔️ Interior dimensions: 2600 mm L * 1800 mm D * 1450 mm - 2220 mm H ✔️ 4 polyester filters ✔️ Filter dimensions: Ø325 * 725 mm ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder recovery container: 30 LT ✔️ 360-degree rotating and movable suspension system ✔️ 1 x 3 kW Extractor Fan – 3500 m3/h ✔️ Control Panel: 1 ✔️ Lighting Knedpfowc Ep Asx Aaboc ⭐ Powder Coating Gun – STRONG ELITE MULTICOLOR Effortlessly coat with all powder colors, coat complex geometries with outstanding efficiency and quality, and do so in the most challenging environments. Inquire now – Make your business fit for the future! ⭐ Follow us for new campaigns ⭐ ☀️ 2-YEAR WARRANTY ☀️