Used Continuous Furnace for sale (4,989)

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h Knodpfx Aaexpuahsboc connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m Ksdpfx Aaexfcdysbjnc - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Ksdpfsxdantsx Aabjnc

Condition: ready for operation (used), A small tunnel oven for pizza production is available. Heating capacity: 10kW, temperature range: 120°C-300°C, conveyor time: 90s-20min, conveyor belt dimensions X/Y: 460mm/1320mm, baking area X/Y: 460mm/610mm, production capacity for 26cm pizzas: approx. 70 pieces/h, machine dimensions X/Y/Z: approx. 1450mm/1000mm/450mm, weight: approx. 170kg. An on-site inspection is possible. Knsdoxapgqjpfx Aabjc

Year of construction: 2001, condition: used, machine/vehicle number: 12117, Continuous Furnace / Brazing Furnace Max. operating temperature: 1120°C Normal operating temperature: 1050°C Knjdpfxowku N Uo Aaboc Conveyor Belt: Useful width of conveyor belt: 250mm Useful height of conveyor belt: 150mm Heating Chamber: Heating Chamber Length: 1530mm Heating Chamber Width: 500mm Height: 500mm Installed Power, Gas: 33kW Number of Heating Zones: 3 Number of Control Zones: 3 Voltage: 3 x 400/230V Frequency: 50Hz You are welcome to visit us by appointment.

Condition: good (used), Year of construction: 2012, LENZEN ATT 800C CONTINUOUS TEMPERING FURNACE 300kg/h Capacity Knsdjw Ecy Dspfx Aabsc

Year of construction: 2019, condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm Knedpfod Sg Hhox Aabsc heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 8,000 mm, temperature: 1,200 °C, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Knedjvcdr Dopfx Aabjc

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Ksdpswkiipjfx Aabjnc

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7 Kodpoclupdefx Aabjnc

Year of construction: 2016, condition: new, heated length: 4000 mm conveyor belt width: 900 mm Kjdpjcdizfofx Aabjnc temperature: max. 950 ° C

Year of construction: 2012, condition: ready for operation (used), System type: - Pressing station with subsequent continuous furnace (curing) and sorting station - Year of manufacture: 2012 - Condition: Fully functional Process description: - Ceramic slabs are manually placed on a buffer belt - Transport of the slabs under the pressing station - Pressing under pressure and heat - Further transport of the slabs into the continuous furnace - Curing at constant temperature Knedpfjwbt N Ujx Aabsc Temperatures: - Pressing station: 120 °C - Continuous oven: 120 °C Oven length: 4m

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. Knedpfx Aeq Nyzbsabec 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: like new (used), Chanber size: 280x180x500mm upper 280x130x450mm lower Knjdpfod Sm Diox Aabec Max temperature: 700 C °

Condition: new, Year of construction: 2025, functionality: fully functional, Your advantages at a glance Kodpewpr I Esfx Aabenc Modular operating equipment system: Enables quick and clean handling of operating resources. Highest protection class IP55: Dust and splash-water protected, ideal for demanding production environments. Maintenance-friendly: Easy maintenance due to the modular print head and a single, long-lasting filter element. Intuitive operation: Large 10-inch touchscreen display for simple setup and handling. Printing of up to 5 lines with various fonts and flexibly controllable data sources. Efficiency and sustainability: Low solvent consumption and durable components sustainably lower operating costs. The continuous inkjets are particularly suitable for industries such as cosmetics, dietary supplements, food and beverage production, pet food, chemicals, as well as logistics and packaging. Thanks to the robust construction and flexible printing options, the devices can be individually adapted. Easy integration into your system.

Year of construction: 1988, condition: good (used), Chamber furnace, hardening furnace, tempering furnace, muffle furnace, nitriding furnace, chamber furnace, annealing furnace, annealing and hardening furnace -Manufacturer: Nabertherm, hardening furnace type N60/H -Program control: STANGE type SE-402 Knedpfxsvrivao Aabjc -Usable space: 400/420/H390 mm -Heating power: 10 kW -Nominal temperature: 1340°C -Individual components: see photos -Transport dimensions: 950/1070/H860 mm -Weight: 290 kg

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. It requires electronic and mechanical renovation. Kedpog R Sh Ajfx Aabonc Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Year of construction: 2017, condition: used, controller manufacturer: SIEMENS, heating capacity: 43 kW (58.46 HP), temperature: 1,200 °C, CONTROLS .. SIEMENS CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. operation modus: continuous .. Heating capacity: 43 kW .. temperature max.: 1200 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: annealing .. heat treatment medium: inert gas .. length: 3250 mm .. width: 450 mm .. Height: 30 mm ELECTRICAL SPECIFICATIONS .. mains frequency: 50 Hz Continuous furnace with gas treatment Type of treatment: Annealing and hardening under protective gas Performance data: Belt load 5 kg/m Working temperature 1050 C° Consumption values: Electrical heating power 43 kW Protective gas consumption 6 m³/h N₂ Forming gas 12 m³/h H₂/N₂ Cooling water delta T15° 2 m³/h Continuous furnace Conveyor width 450 mm Clear height above belt 30 mm Furnace usable length heated 3250 mm Upper limit temperature 1150 C° Working temperature 1050 C° Electrical heating power 96 kW Knedsxpt E Njpfx Aabec Conveyor belt control range 0-600 mm/min System length 15000 mm System width 1700 mm Furnace height 1900 mm Weight 6500 kg Translated with (free version)

Year of construction: 1996, condition: used, functionality: fully functional, load capacity: 650 kg, IPSEN DAQ 7-8 Manufacturing Year : 1996 Heating : Gas Heaters : Recon 2 (x3) Charge Capacity : 650kg Brutto Charge dimensions : W:650mm L:1173mm H:550mm Protective Gasses : Endogas Ammonia Nitrogen Kjdpfxsxivumo Aabjnc The furnace can be operated with existing conditions.

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Knsdpfjiryyaox Aabec Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Year of construction: 2006, condition: good (used), Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Thermal Power 3,2 MW Dimensions 7x7x4 meters, capacity of wagoon 80 tons. Kjdpjhgkdqefx Aabonc

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Alternatre Gas inlet. Good working condition. Knjdsxnpw Eopfx Aabjc Please check out our other listings as well.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control Ksdpsxp Rn Ujfx Aabenc - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Year of construction: 2010, condition: excellent (used), controller manufacturer: SIEMENS, controller model: S7-1500, overall weight: 60,000 kg, total height: 6,600 mm, space requirement length: 15,000 mm, space requirement width: 6,300 mm, temperature: 250 °C, year of last overhaul: 2021, CONTROLS .. electronic controls SIEMENS S7-1500 CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 250 °C HEAT TREATMENT COMPARTMENT / ZONE .. heat treatment process: tempering .. heat treatment medium: water .. temperature max.: 250 °C .. length: 8000 mm .. width: 4300 mm Knodpfoxnwbfox Aabjc .. diameter: 4300 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 15000 mm .. space requirements -front/back-: 6300 mm .. total height: 6600 mm .. height above floor level: 5500 mm .. height under floor level: 1100 mm .. total weight approx.: 60000 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz Electrically upgraded in 2021 (Siemens). - Has an aviation and aerospace certification. - Complete documentation of all calibrations - Monitoring system for temperature and pressure zones Operating temperature: 250 °C Operating pressure: 12.5 bar Operating hours: - Vacuum pump: 9,132 h - Fan: 15,497 h

Condition: good (used), Year of construction: 1940, functionality: fully functional, type of input current: three-phase, total height: 4,000 mm, total width: 3,000 mm, total length: 6,000 mm, year of last overhaul: 2021, input voltage: 10,000 V, temperature: 1,600 °C, power: 1,200 kW (1,631.54 HP), overall weight: 30,000 kg, Klein Lichtbogen Ofen 3-5 tonen Kapazitaet, 1,2 MW/ 10 kV. Kedpeg S U Dkefx Aabjnc