Year of construction: 1992, Condition: good (used), machine/vehicle number: 9464, Lg.No. 22351 Technical data: - Pressure capacity at 10 bar 35 KN - ram stroke 12 mm - throat 95 mm - Installation height approx. 134 mm - table size approx. 230 x 190 mm - Air consumption per stroke 8,0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - foot switch Cslil I Sjidp Uve Eogt - machine base - pressure gauge + pressure regulator - SCHÜCO tools 283073 , 293901 ,293902 , 296162 , 296168 , 296199 , 297755

Year of construction: 1989, Condition: ready for operation (used), Functionality: fully functional, automatic feed with piece counter including roller conveyor for profile feed Cslilovyxx Ho I S Esgt chip discharge with fan

Year of construction: 2020, Condition: as good as new (ex-display), Elumatec TS161-21 table saw: - Precise work due to saw cut from below - Large swivel range up to 45° to the left and up to 0° to the right The special swivel mechanism with integrated rotary table allows working from the front at all angle settings - A workpiece fence that can be moved to the rear enables optimum utilization of the saw blade capacity for wide and flat profiles - Manual saw feed - Saw blade and base included as standard Cgolil I Sjm Hav Uo Ejt - Pneumatic material clamping device (vertical) - Dosing spray device - Maintenance unit Elumatec AMS E355 processing length: 6m - For exact cutting to length of PCV and aluminum profiles - For attachment to all single head saws - Patented rail and carriage system - Length: 6000mm - With automatic cutting length adjustment Technical data E355: - Drive independent absolute measuring system - positioning accuracy + / -0,1mm - Pneumatic blocking on position - memory for 999 data sets - correction values for profiles - Interface RS232

Condition: as good as new (ex-display), Year of construction: 2024, Hydro Pneumatic Corner Crimper EVP-350HP Hydro-pneumatic press operation Press Strength 2 x 3.500 KP at 8 Bar Press Depth 30 mm Cslieuxx Uol I S Ejgt Back centring positioner with Pneumatic work piece clamping 3 sets standard crimping knives 3/5/7 mm Air service unit Profile support arms with Perdinax

Year of construction: 2006, Condition: used, Max. saw blade diameter: 500 mm Cgjljvcmirsil I S Eet cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 2007, Condition: ready for operation (used), Sawing and processing machine Emmegi Quadra. Colil Isvy Ecro S Ejgt Machine can still be seen in operation

Condition: used, Year of construction: 1995, machine/vehicle number: 9104, Offer 24237 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - horizontal 400 x 3.5 x 40 mm - Notching range / notching depth vertical 135 mm - Notching range / notching depth horizontal 105 mm - Notching width at 90° up to 280 mm Cgjlioub Sl Dsl I S Ejt - Notching width at 30° up to 100 mm - Vertical saw blade can be manually tilted 90° - 30° via handwheel - Can be used as a shifter saw without horizontal saw blade - Profile stop shoulder 30° - 90° - 30° tiltable - Digital display - Pneumatic material clamping vices - Pneumatic coolant testing device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, CNC machine 0verHead M40 with CAN control Year of construction: 2018 Optical condition: minimal signs of use Technical condition: good Prefabricated CNC machine for direct sale! Cgjlil Ijui Hiyo S Ejt -Frame construction with protective housing -OverHead M40 - LES5 Travel range X/Y = 1210/910 -Please note that the travel range may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 watts / 48 volts -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16 50/60Hz -Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3)) Mounted accessories: -iSA 2200 milling spindle with 2.2kW and automatic tool change function 4-fold tool change SK 20 -Minimum quantity cooling spray system Current equipment: -Please note that the travel distance may vary due to any attachments -Control cabinet (1200x600x300mm) incl.4-axis control IMD CAN EC-Servo -X-axis motor EC60TM/ 200 Watt / 48 Volt -Y-axis motor 2x EC60TM/ 200 Watt / 48 Volt -Z-axis motor EC60TM/ 200 watts / 48 volts - with brake -iOP-TFT + swivel arm + keyboard + iPC 25-F5 with Win 10 IoT Enterprise LTSC 2019 -Z-clearance: 340mm -Z-axis travel 310mm -Spindle pitch X/Y-axis: 10mm/10mm -Spindle pitch Z-axis: 5mm -Slot clamping table 1600x1250 mm -Vertical sliding door: front -Underframe with decorative panels -Win-Remote software For operation, service and maintenance purposes, you require additional clearance when setting up the machine, based on the machine dimensions: -control cabinet side min. 1000mm -all other sides at least 500mm -to ceiling height min. 300mm Machine connection values (OverHead) -Electrical connection: 400V/16A 50/60Hz Air consumption of pneumatic options: (all approximate values) -Tool changer (WW): 50l/min pulse -Minimum quantity lubrication: 180l/min -Internal air cooling of milling spindle: 150l/min (depending on spindle type) -Cool-Min external: 150l/min (5µm and 1µm filter required) Blow-out at WW: 50l/min pulse (depending on spindle type and WW) -Compressed air connection: (min.7.5 bar permanent) 8 bar (dried and cleaned air according to ISO 8573-1, classes 2, 4, 3))

Year of construction: 1997, Condition: used, - for window and door profiles made of aluminum and PVC - milling spindle length (mm) 90 - cutter diameter max (mm) 250 Cjlielkfu Ujl I S Ejgt - milling depth up to (mm) 80 - Milling width (mm) 330

Year of construction: 1998, Condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Celevcl S Eoil I S Eegt Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops Weight: about 350 kg

Year of construction: 1990, Condition: good (used), machine/vehicle number: 8988, Offer 22523 Technical data: - Pressure capacity at 10 bar 35 KN - ram stroke 12 mm - throat 95 mm - Installation height approx. 134 mm - table size approx. 230 x 190 mm - Air consumption per stroke 8,0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - weight approx. 100 kg - with: - foot switch - pressure gauge + pressure regulator Cslil Isk Rugvj S Ejgt - 4 x punching tool

Year of construction: 2005, Condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Cgolileu T N D Ue I S Est Max. profile height: 190 mm Max. cutter package height: 95 mm Pneumatic material clamps Spray device

Condition: good (used), Year of construction: 2012, machine/vehicle number: 00512S42, Offer 24379 Precision deburring and beveling machine / edge trimming machine Technical data: Steel - Stainless steel - Aluminum - Plastics ,- Processing Deburring and faceting process is carried out with milling cutter Facing cutterhead with indexable inserts Motorized feed module Bevel angle adjustment 45 ° Continuously adjustable bevel width 0 to 10 mm Speed 2800 rpm Drive 400 V / 1.5 kW Cgsliljud Ngqo I S Est Space requirement approx. W 600 x D 750 x H 950 mm Weight approx. 90 kg

Year of construction: 1994, Condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Colil Iju T Hibs S Esgt Milling area horizontally (from the front or rear): 220 x 95 mm Stroke: 110mm With side stops (dismantled) Weight: about 350 kg

Year of construction: 1994, Condition: used, machine/vehicle number: 20542, Lg.no. 24238 Technical data: - Pressure capacity at 10 bar 60 kn - Plunger stroke 40 mm - Projection 100 mm - Installation height approx. 140 mm - Table size approx. 280 x 200 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 800 x H 1450 x D 1000 mm - Weight approx. 160 kg - with: Cgjlil Ijviuk Rs S Eot - Foot pedal - original machine base frame - Pressure gauge + pressure regulator - Round shuttle table for 6 punching tools - Various punching tools

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Cgelilju T E Snj I S Est Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Year of construction: 2009, Condition: good (used), 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,300 mm Travel Y-axis: 1150 mm Cgjlil I Setvrc Sj Eot Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. Speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Saw blade diameter: 500 mm minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material clamps Pendulum operation through two light barrier areas Manual control console Spindle in very good condition Loading is included in the price Weight: approx. 11,500 kg

Year of construction: 2009, Condition: used, Max. saw blade diameter: 280 mm Cgolil Ijuxc Tve S Eot Pneumatic material feed via 2-hand operation minimum quantity spraying Miter cuts possible on both sides with locking points Roller conveyor and length stops on request

Year of construction: 2003, Condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 6,400 mm Colilouwq S Dj I S Esgt Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system minimum quantity spraying Tensioner detection and automatic displacement chip conveyor belt in the bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Year of construction: 1997, Condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and degree display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Cslilsn Hbmqe I S Ejgt Pneumatic material clamps coolant lubrication

Condition: used, Max. saw blade diameter: 400 mm Pneumatic material clamp Celil Ieup D Izs S Eegt Manual feed

Condition: used, Max. saw blade diameter: 370 mm Cgjlil Ioup D H Ro S Eet

Condition: used, Max. saw blade diameter: 500 mm Continuously adjustable hydropneumatic saw blade feed Colil I Sjunyvlo Ejgt Pneumatic material clamps Weight: approx. 450 kg

Condition: used, Year of construction: 2004, Assembly table tiltable via foot lever Celil Ioumlrvs S Eogt Dimensions basic dimensions: 1500 x 1400 mm, 3200 mm swung out Weight: approx. 100 kg

Year of construction: 1997, Condition: used, Max. Saw blade diameter: 450 mm mass: about 700 kg Saw blade diameter: 450 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Cgolijhxzlbsl I S Eet Minimum quantity spray device Table can be rotated on both sides with locking points at 45° Weight: approx. 650 kg