Year of construction: 2001, condition: good (used), Multifunction punch, punch, hole punch, pneumatic punch Pgedpfxsb A H U Io Aa Deg -pneumatically operated -Year of construction: 2001

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile Podpfx Aepcmthsa Dsgg -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Condition: used, Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine Pgedpfx Aaeif Huve Dog -Manufacturer: Elu, copy milling machine type AS 70 -Milling length: 365 mm -Milling width: 100 mm -Milling stroke: 45 mm -Motor: 220/380V 740W -Spindle speed: 12000 rpm -Dimensions: 800/750/H1320 mm -Weight: 108kg

Condition: used, Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel -Cable reel -Drum: Ø 300/160 mm Pgjdpfod S D Dqjx Aa Dsg -Weight: 11 kg

Year of construction: 2012, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatically operated -Piston stroke: 20 mm -Pressure power: 29.42 kN Pjdpfx Aasc Uldre Dogg -Nominal pressure: 6/7 bar -Foot switch -Year of manufacture: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Year of construction: 1995, condition: used, Pneumatic press, pneumatic punch, multifunction punch, punch, universal punch, punching machine -for window construction: tools -pneumatic: with foot control -with various tools: -pneumatic: operated Pgjdpfx Ajdkx S Eja Djg -Air pressure: 8 bar -Pressure force: about 3.2 ton. -Stroke max.: 20 mm -Dimensions between stands: 250 x 200 mm -Dimensions: 505/510/H1360 mm -Weight: 90kg

Condition: good (used), Roller conveyor, conveyor track, roller conveyor belt, roller track, saw roller block, saw roller block, saw horse, saw roller conveyor, length stop, longitudinal stop, saw stop, material stop, motorized length stop, controlled length stop, roller conveyor, conveyor track, roller conveyor belt, roller track -Length stop for: saws -with: stop by hand in longitudinal direction -with: Side stop movable via hydraulic motor in transverse direction Pedpfxod D R Sye Aa Dogg -Display via: SIKO mechanical position indicator -Roller conveyor: Ø 80 x 1340 mm -max. stop length: 2950 mm -Roll spacing: 300 mm -Dimensions: 3000/1640/H940 mm -Weight: 534 kg

Condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Pgjdpfjb A I H Rex Aa Dog Article No.: 296 566 -Dimensions: 800/400/H1200 mm -Weight: 180 kg

Condition: new, 15000 kg height 790 - 1150 mm width 1200 mm Pgjdpfx Aox Ddaasa Dsg ja 790 - 1150 mm 120 x 1200 mm Support trestle, assembly trestle, steel trestle, welding table, assembly table, steel trestle, work trestle - Our support trestles are characterized by their stable construction, high load-bearing stability, and indestructible service life. - Trestle support made of screen printing - Powder-coated in RAL 5010 gentian blue - CE marking - Transport on request

Condition: excellent (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 -Weight: 170 kg Psdpfx Aob A Hl Rja Dogg

Year of construction: 2017, condition: good (used), Assembly table for all assembly work on windows and doors. The movable and extendable work surfaces allow for absolutely safe handling of frames in all sizes as well as very large structures. Height-adjustable feet The height-adjustable feet ensure precise adjustment of the working surface to the desired height and perfect alignment. In addition, the table can be fixed to the floor using the pre-drilled holes. The work surfaces are covered with soft, non-slip PVC, which allows frames to rest securely. A storage shelf enables easy and organized storage of small parts for quick access and clear arrangement of tools and components. Quick-connect couplings provide easy supply of compressed air. Adaptation to any frame size is ensured by both the horizontally movable support plates and the roll-mounted, extendable support plate, allowing for a highly flexible enlargement of the working area. Psdpfx Aaoycknpe Dogg

Condition: good (used), saw blade diameter: 360 mm, Sliding saw / Mitre saw / Chop saw / Radial saw Wegoma zs 135 Mitre saw type ZS135 Pgedjyckbiepfx Aa Djg -Motor power: 2.2 kW -Saw blade: Ø 360 mm, swiveling

Condition: good (used), Year of construction: 2011, functionality: fully functional, Itaca corner press with retractable backstop Pjdpfxjycip Se Aa Djgg

Year of construction: 2014, condition: like new (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps Pedoycht Nopfx Aa Degg - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Electronic double mitre saw with automatic feed of the movable cutting head, driven by a brushless motor with numerical control system. Pneumatic control of the angle adjustment in three fixed positions: 90°, 45°, and 22°30' (external), or via a mechanical system for manual adjustment of intermediate angles. Hydro-pneumatic feed of the saw blades. Swivelling heads: the rotation of the heads around the horizontal axis is performed by pneumatic cylinders, with adjustable angles ranging from 90° to 22°30' (external). Intermediate angles are set using special manually adjustable stops. The mobile units are equipped with integrated pneumatic drop-down safety devices for the working area. Pneumatic intermediate support The pneumatic intermediate support is particularly useful when cutting lightweight profiles of considerable length. In such cases, the pneumatic support automatically provides ideal support for the profile. Additional clamp for profile support on roller conveyors After each cut, the remaining short profile section tends to fall onto the roller track, posing the risk of coming into contact with the saw blade edge while the cutting phase is ongoing. This movement can potentially damage both the workpiece itself and the freshly cut section. The additional vise installed on the roller conveyor prevents this issue by securely holding the profile throughout the entire cutting operation. Year of manufacture: 2019, as new! The saw has barely been used and protective film is still present on the printer and scales! As the saw unfortunately does not have a cut counter, it is not possible to state exactly how many cuts have been made. However, it is immediately apparent upon inspection that the saw is virtually as new and has seen very little use. It was used by the previous owner solely for training purposes! LCD display with backlighting Podpfxsw Svxle Aa Dogg Prepared for connection of an industrial label printer USB port Single-cut operation Storage for 99 profile correction values and automatic calculation of cut length for mitre cuts Storage for 20 cutting lists entered via keyboard (50 sets each) Storage for 10 cutting lists (100 sets each) imported from an external PC via RS232 serial interface MACHINE FEATURES Position detection of the movable unit via direct measuring system with magnetic tape 2 carbide-tipped saw blades, 500 mm diameter Pneumatic full safety covers over the cutting area 2 pneumatic horizontal clamping devices with low-pressure safety system Profile support roller conveyor Lubrication system: mist spray device or minimum quantity spraying device Cuts with saw blades Ø 500 mm in mitre range from 22°30' (external) to 90° Manual profile support Prepared for automatic start of chip extraction system MG4 Two standard profile inserts Metric scale Label printer incl. peel-off function Long cut Shortcut Cross cut Macro Automatic cut Software package pro

Year of construction: 2017, condition: like new (used), functionality: fully functional, Single-spindle copy milling machine with manual operation and pneumatic locking. Head milling movement via indirect lever. Enables continuous machining without rotating the workpiece and processing of steel up to 2 mm. Scratch-resistant worktable. Manual tracer stylus. Deflection Lever for Head Movement: Manual movement of the tool in the horizontal plane is implemented via a lever to reduce operator effort. The handle height is adjustable for practical and ergonomic usage. Control Joystick: The lever enables vertical travel of the milling unit. The hand lever integrates the motor start button. The milling spindle is equipped with a tool holder featuring an ISO 30 quick-release coupling; four storage slots for tool holders are located on the side of the machine. Stops and Roller Conveyors: Roller conveyors on both right and left sides facilitate the machining of very long profiles. A system of hand-adjustable stops, also fitted on both sides, ensures correct positioning of the workpiece in the machine and brings it into the working area. Podpfjycgviex Aa Dsgg Stylus with 4 Diameters: The mechanical tracer has four selectable positions, each corresponding to a different tool diameter. It is set onto the pre-chosen template, guaranteeing precise and safe machining. Clamping Devices: The machine is equipped with manually adjustable horizontal pneumatic clamps that ensure secure and correct fixation of the profile on the machine.

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. Pjdpoycgtbofx Aa Dsgg The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Condition: good (used), Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg Pgjdpfxjb Hw Dbo Aa Dog

Year of construction: 2008, condition: used, functionality: unexamined, Auction: Plant Closure Roschmann, Gersthofen (Augsburg) Podpfx Ajx N Niasa Degg Place your bid now – Sale to the highest bidder. Lot 2910009: Complete industrial-grade double miter saw system for precise cutting of aluminium or PVC profiles, featuring integrated dust extraction. This robust and reliable setup is ideally suited for use in window, façade, or profile fabrication, where accurate angle cuts and clean operation are essential. Technical Specifications: Double Miter Saw - Manufacturer: Elumatec - Model: DG 244/10 - Power supply: 3~PEN / 400 V / 50 Hz - Motor output: 3.5 kW - Compressed air requirement: 7 bar - Speed: 2,800 rpm - Year of manufacture: 2008 Dust Extraction Unit - Manufacturer: Schuko (H. Schulte-Sudhoff GmbH & Co. KG) - Model: DG 244 - Airflow rate: 1,870 m³/h - Motor output: 2.2 kW - Suction pressure: 1,050 Pa - Power supply: 230/400 V, 50 Hz

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pgsdpfxsvmz R Ss Aa Djg Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Milling cutter diameter 250 mm Pgedjx Rbz Dspfx Aa Djg Max. Frästiefe: 80 mm Milling width: 330 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg

Condition: good (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter Pgsdpfx Asb A Srnea Dog -1x milling cutter: Ø 52/170 mm -Diameter: 22 mm -Weight: 2 kg

Condition: good (used), Gear cutter, module cutter, hob cutter, tooth form cutter, module milling head, end mill cutter, roller cutter, milling cutter, hob cutter, splined shaft hob cutter -1x milling cutter from: 650.054.06 A SPAN. < 5 ° EV 4 CO Pgsdpob A Srisfx Aa Dsg -Diameter: 22 mm -Weight: 0.6 kg

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Pgjdpjxvhiiefx Aa Dog Blade diameter 550 mm Electronic head tilting Internal/external tilting from 22°30′ to 135° Labeling machine

Year of construction: 2025, condition: new, New single head saw with up-feed blade Ø 300mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO - Tungsten carbide saw blade Ø 300mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices Pgjdpfx Asf Nwxwsa Djg - Two horizontal vices - Set up for the extraction of chips and fumes