Year of construction: 1999, Condition: good (used), Very nice high 10-t speed Japanese press with fixed stroke of 15 mm, rates from 0 to 2500 strokes per minute Dsb Hl Akjim Iv Douokl

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, MAG Mozart Zero H8 / Flat 8 (P7) round / flat wire enameling machine especially suitable for the production of copper wires Dsb Hl Akeunyqijuskl Machine is as good as new! Production data (Cu) Diameter range: 1,500 - 2,500 mm / awg 14.5 - 10.0 Max. Production speed: 150 m/min Max. Input diameter: 5.50 mm Cross-section range: 0.80 - 8.00 mm² Nominal width range: 1.00 - 6.00 mm Nominal thickness range: 0.80 - 2.00 mm Speed range: 0 - 70.00 m/min Further information is available on request.

Year of construction: 2006, Condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 Djb Hl Akef Nku Rjuekl The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 873/SV revised to NEW Diam. 9 mm max Length 100 mm max Length Cut 125 mm max PPM 250 Available at Calolziocorte (LC) - ITALY Delivery time: 8 weeks Dob Hloittf Se Akuekl Revision made by HBR srl with: - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Dob Hl Aet Ixkzokuokl

Condition: like new (used), Functionality: fully functional, Year of construction: 2021, MAG Mozart Zero H7 round wire enameling machine especially suitable for the production of copper and aluminum wires Machine is as good as new! Production data (Cu) Diameter range: 1,000 - 1,600 mm / awg 18.0 - 14.0 Max. Production speed: 200 m/min Dkjb Hl Aksunypxeuel Max. Input diameter: 2.80 mm Production data (Al) Diameter range: 1,500 - 2,000 mm / awg 14.5 - 12.0 Max. Production speed: 200 m/min Max. Input diameter: 2.80 mm Further information is available on request.

Condition: new, Year of construction: 2024, shaft length under head: 80 mm, thread length: 55 mm, travel speed (max.): 480 mm/min, THREADING MACHINE E.W. MENN GW63 Refurbished as new acc. to CE Stand. Dob Hl Aket Uucasujkl Completely overhauled. New Guides, vibrator, new vibrating evacuation. New electrical system with Inverter and PLC M8x80/55 mm. 480 ppm. Thread diameters (min./max.): 3 - 8 mm. Dies length: 115/130 mm. To be viewed and tested at HBR srl - Calolziocorte (LC)

Condition: like new (used), Functionality: fully functional, machine/vehicle number: 28727, Diameter max: 6 mm Length under head max: 30 mm Deb Hl Ajthgkqokujkl Speed: 400 ppm

Condition: like new (used), Functionality: fully functional, Year of construction: 2022, MAG Mozart Zero H6 round wire enameling machine especially suitable for the production of copper and aluminum wires Machine is as good as new! Production data (Cu) Diameter range: 0.500 - 1.200 mm / awg 24.0 - 16.5 Max. Production speed: 450 m/min Max. Input diameter: 2.40 mm Production data (Al) Dkeb Hleunym Rj Akusl Diameter range: 0.850 - 2.000 mm / awg 19.5 - 12.0 Max. Production speed: 450 m/min Max. Input diameter: 3.35 mm Further information is available on request.

Condition: refurbished (used), Year of construction: 1988, CARLO SALVI 635 SV refurbished acc. CE Standards 6,35x70 mm. 360 ppm Available with RF system to produce semitubular parts. - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central Dsb Hl Akeh N Dh Ajujkl - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl HBR will provide at total revision.

Condition: ready for operation (used), Capacity (mm): 6x60 Dob Hl Ajdv T E Ujkuokl

Condition: good (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 39035, NATIONAL 750 S3 5 Dies Cutoff: ø 22 ( 480 N/mm2) - ø 19 ( 600N/mm2) Kickout Stroke -Die: 100 mm Heading Load: 2730 kN Universal Transfer II Dkeb Hljtmtd Ee Akusl

Year of construction: 2002, Condition: like new (used), machine/vehicle number: 16.34.02, 6 Die 6 Blow Header MULTIPRESS MP610LS Maximum Cutoff diam. (500/Nmm2): 12 mm Max. Cutoff length : 105 mm Max. KO length (die side): 80 mm Max. PKO length: 23 mm Dkjb Hoh Tkrajl Akujl Max. Speed: 180 ppm

Year of construction: 1995, Condition: good (used), machine/vehicle number: 115, Capacity: 5x30 mm Dkjb Hlodv Tzms Akujl Production (max): 350 ppm Bushing Cutoff

Year of construction: 1988, Condition: good (used), machine/vehicle number: 170167, Capacity (mm): 8.5x50 Production (max): 250 ppm Dksb Hl Ajdwmciokusl

Year of construction: 1980, Condition: good (used), Capacity (mm): 8,5x60 Production (max): 330 ppm Year: 80's Dkoboh N Sire Hl Akusl

Year of construction: 1980, Condition: ready for operation (used), machine/vehicle number: 491, Capacity (mm): 12x125 Production (max): 90 ppm Dob Hljdv T Hfe Akuskl

Condition: good (used), Year of construction: 1997, machine/vehicle number: 24625, COLD HEADER CARLO SALVI 246/TR 2 Die 4 Blow Djb Hl Akohn R E Ijuekl Max. Cutoff Diameter: 8 mm Max. Cutoff Lenght: 75mm Max. K.O. Lenght First Die: 85 mm Max. K.O. Lenght Second Die: 60 mm Max. K.O. Lenght (Punch Side): 10 mm

Year of construction: 1973, Condition: used, 2 Die 2 Blow Header 10x100 Dksb Hl Ajirt Thjkuol Max. Speed: 170 ppm

Year of construction: 1976, Condition: good (used), machine/vehicle number: 976, Capacity (mm): 8x75 Production (max): 200 ppm Debjdv T E Ns Hl Akujkl

Condition: ready for operation (used), Year of construction: 1974, Functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Debstqu U Ts Hl Akuokl Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine

Year of construction: 1988, Condition: good (used), Carlo Salvi 1 die 2 blow Model 780/SV Maximum Cutoff dia.mm: 6,35 Dkob Hl Akjhrdmxjuel Max. Cutoff length mm: 97 Max. K.O. length (die side) mm: 80 Max. Speed, pcs, per minute: 360

Year of construction: 1996, Condition: good (used), machine/vehicle number: 25295, Capacity (mm): 24x150 Production (max): 120 ppm Dsbedv T Hlj Hl Akuekl Optional Warm Former

Condition: ready for operation (used), Year of construction: 1970, Functionality: fully functional, One Die Two Blows Capacity (mm): 14x200 Production (max): 75 ppm Dobsulf D Ne Hl Akujkl 70's

Year of construction: 1981, Condition: good (used), machine/vehicle number: 57KE5, Boltmaker Sacma SP27 Year: 1981 4 Dies plus pointer and threader. Cut-off diameter (max): 10,5 mm Cut-off lenght (max): 85 mm Die Kick-out (max): 65 mm Dkjb Hl Akeq T Rr Asuel PPM max: 275 parts/minute