Condition: excellent (used), This machine combines a thread-rolling machine and a Saspi pointing machine in order to carry out the following Dkjb Hcyxeuir T Doaol tasks in a single feed processes of chamfering and threading or drilling and threading of parts. Saspi rolling machines satisfy the production needs of modern companies, allowing a quick response to the daily changing demands of the market, using the latest technology.

Condition: like new (used), Year of construction: 2016, Thread cutting machine from CMA as good as new Dob Hcowazupjyxajkl Type: LN12 400 M12 Capacity: M3 to M12 Torque: 28 Nm Working range: 1800 mm Pneumatically driven

Year of construction: 2000, Condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Djb Hoim Ittocyxaskl

Condition: excellent (used), Year of construction: 2013, Komax Kappa 310 - automatic cutting and stripping machine. Machine in very good condition with additional equipment: - Starter set - Straightening unit - Automatic conductor detection - Blade set for flat cable Technical data: Wire cross section min. 0.05 mm² Wire cross section max. 6 mm² Wire length max. 800000 mm Strip lengths, full stripping side 1 max. 115 mm Strip lengths, full stripping side 2 max. 40 mm Wire outer diameter max. 10 mm Wire draw-in speed max. 4 m/s Original user manual available. Dkeb Hcev Dbi Ajyxasl Personal collection preferred but shipment also possible. Shipment cost not included. For more information please contact us via e-mail.

Year of construction: 1996, Condition: ready for operation (used), A Wafios CNC spring coiling machine is available. Wire diameter range: 1.5mm-6mm, max. spring diameter: 20mm, feed rate: 40m/min, production output: 80 pieces/min, axis resolution X/Y/Z/C/A/O: 0.1°/0.36°/0.001mm/0.001mm/0.1°/0.1°, working height: 1200mm, machine dimensions X/Y/Z: approx. 2300mm/2500mm/2400mm, control: Schleicher. On-site inspection is possible. Djb Hcewdwzmsyxaokl

Condition: excellent (used), Year of construction: 2013, loading capacity: max. 1.500 Kg. wire diameter range: 0,5 - 9,0 mm coil outside diam. max. 1.000 mm Dkeb Hcyxjvam Iisael coil inside diam. min. 300 Kg. speed: 0 - 80 U/min

Condition: ready for operation (used), Ready-to-use slotting machine Most recently, grub screws and resilient thrust pieces were manufactured with this machine. However, any other workpieces (shank screws, grub screws, fitting screws) can also be machined. Dkeb Hcsv Ia U Eoyxael Rare machine, ready for immediate use.

Condition: new, This wire and strip bending machine, equipped with 8 Yaskawa motors and Windows PC numerical control, is perfect for manufacturing large parts in 2D or 3D. The advantages of this equipment include low tooling costs, easy programming, low maintenance costs, reliability and dimensional repeatability of the parts produced. Dkebspiucxe Hcyxael

Condition: excellent (used), Year of construction: 1990, loading capacity: max. 1.000 Kg. coil outside diam. max. 1.000 mm Dkob Hcsh U H U Neyxajl

Year of construction: 1985, Condition: ready for operation (used), Compression spring making machine. Most of the Schenker range of machines, as well as some Bamatec equipment is available with us. Djb Hcyof I Uumoxaekl

Condition: excellent (used), Year of construction: 1973, Functionality: fully functional, Pointing range: 7,0 - 1,5 mm Number of kalibers: 16 Dsboh U A Sfj Hcyxaekl

Condition: as good as new (ex-display), Manual Coiling comp-ext-tor Spring Machine Dob Hcyji Ik H Iexajkl

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, Equippment: 1 Grip feeder system right hand side Dksbetmty Ne Hcyxaol 1 Eccentricpress 70 kN 3 Narrow slide units 1 Control shaft Working range: wire diameter range: 0,5 - 3,0 mm strip metal width: max. 40 mm feeding length: max. 240 mm output: max 400/min

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Dkjbelf Ek Ds Hcyxael

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, equipped with: Deb Hcystzlzaexaskl 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 2 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: new, Cam-driven spring forming machine. A well-proven machine which each spring manufacturer should have in its spring shop for one the best ratio 'price / quality of production' on the market. Dkjb Hcji Ik Hroyxael

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, equipped with: 1 Right hand feeding system 1 Eccentricpress 250 kN 4 Standard slide unit 1 Narrow slide unit working range: wire diameter range: up to 6,0 mm stripmetal width: up to 80 mm feeding length: up to 520 mm Dsbsr Axlve Hcyxajkl output: 10 - 250/min

Year of construction: 1984, Condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Dkjb Hcyxeh T Ulyoaol Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole

Condition: good (used), Year of construction: 1982, Functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN 3 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm Deb Hcyen E N Ndexaskl strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: new, This wire and strip bending machine, equipped with 8 Yaskawa motors and Windows PC numerical control, is perfect for manufacturing large parts, up to 1 m per dimension, in 2D or 3D. The advantages of this equipment include low tooling costs, ease of programming, low maintenance costs, reliability and dimensional repeatability of the parts produced. The contained price, with a motorised reel with a 1 tonne load capacity and 10 tool sets, is less than €100,000. We are presenting this machine in our Montpellier showroom (south of France) . Dsbsphpgbj Hcyxajkl

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 2 narrow slide units 1 cam shaft Dkjb Hcyxohmyk Ieael working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN 4 standard slide units 2 narrow slide units 1 cam shaft Dksb Hcyxsrwnyvsael working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: excellent (used), Year of construction: 1984, Equipped with: 1 Grip feeding system right hand side 3 Press units á 180 kN = Total 540 kN 4 Standrad slide units Djb Hjma S Nrocyxajkl 1 Narrow slide unit working range: wire diameter range: up to 10,0 mm strip metal width: up to 100 mm feeding length: up to 250 mm output: up 135/min.

Condition: good (used), Year of construction: 1977, wire diameter range: 1,0 - 5,0 mm ring diameter range: 100 - 600 mm wire feeding length: max. 2.000 mm Dkob Hcob Hqz Ueyxajl output: 10 - 120 pcs./min.

Year of construction: 1972, Condition: good (used), working width: max. 1.700 mm number of length wires: max. 16 Dobjg Ryvwj Hcyxaekl wire diameter length wires; 2,5 - 3,25 mm wire diameter edge wires: max. 3,25 mm wire diameter knot wires: max 3,2 5mm