FLAT GRINDING MACHINE

ABA FFK

Condition: ready for operation (used), ABA-WERK Aschaffenburg, FFK surface grinder -Mains voltage: 380 V -Total power consumption: 1.75 kW -Magnetic chuck: approx. 300 × 150 mm -Working area: approx. 350 × 300 × 150 mm -Grinding length: approx. 350 mm -Grinding width: approx. 150 mm Kedpjzr U Svjfx Aklsna -Max. workpiece height: approx. 150 mm -Grinding wheel dimensions: approx. Ø 200 × 20 × 76 mm -Grinding spindle speed: approx. 2,800 rpm -Longitudinal table adjustment: manual -Transverse table adjustment: manual -Vertical adjustment: manual -Magnetic chuck: permanent magnet -Coolant system -Grinding wheel guard -Extraction system Dimensions: L x W x H 1.1 x 1.1 x 1.7 meters / Weight 700 kg Errors and omissions excepted.

Condition: used, Pot grinding machine Manufacturer: Gustav Brueckner Type: FSH 1 Maximum distance: Table - Grinding wheel 200 mm Table surface: 315 x 135 mm 380 Volt 0.75 kW 1.85 Amperes Knodpscv Tb Dofx Aklea Space requirement: W 650 x D 600 x H 1600 mm

Condition: good (used), Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate -Magnetic plate: 360 x 122 mm -Traverse paths: x 390 mm / y 170 mm / z 260 mm -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm Knjdpfxsikgdms Aklja -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Knedpfox S Rcmsx Aklja

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control Knsdpfx Akjuhpiyelea - Screw profile: PVC - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Condition: used, x-travel 800 mm y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW Knedpfxeqpl Uue Aklja weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Condition: good (used), Bar feeder LNS Knjdpfx Asr Iygioklja

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 Kjdpfx Aotqmm Ajklona tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Year of construction: 1985, condition: used, 1 used engraving machine Manufacturer: KUHLMANN Type: GM I-I Working area: 320 x 200 x 280 Stencil table: 500 x 400 mm Work table: 500 x 200 mm 3D form engraving attachment TGV plate engraving attachment Various stencils and type sets Various engraving tools Knedpfx Aksk Tt Axolea Speed range: 4,200 – 20,000 rpm Space requirement: approx. 1.2 x 1 x 1.5 m Weight: approx. 250 kg

Year of construction: 1990, condition: used, x-travel 850 mm Knedpfxet Hwqko Aklea y-travel 1200 mm z-travel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Universal 3D measuring center, double-column, modern software, many accessories