Top grinding machine

ALPA RVB 300

Year of construction: 1962, condition: used, machine/vehicle number: 1790, creator: Karl Klink Model: RW 5 year of construction: 1962 weight: ca. 2500 KG machine. No.:1790 General / technical data: hydraulic horizontal internal broaching machine in a good working condition Ksdodl Uzkspfx Aadodw clearing stroke: 1320mm turning: 1 piece pulling force: 5000 KG at 3m/min (3000KG at 7m/min) Clamping tool: universal drawing head for flat shafts Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and spit trough) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 4600mm x 600mm x 1900mm (without working area) Power supply: 380Volt / 50 HZ / 15A hydraulic motor: 4 KW Accessories / special equipment: - the machine is equipped with a universal pulling head for flat shafts - Coolant / lubricant system - without tool feeder - short oil and oil sump (approx. 900mm) Remarks: The machine is ideal for the production of keyways. On request broaches and mandrels can be supplied. The machine is ready to run under power in our warehouse.

Condition: excellent (used), Horizontal Panel Beam Saw - With rear lifting table Numerical Control MCS Evolution Software Rear Lifting table No. 1 Rear pushers Twin Pusher No. 9 clamps Max. cutting width (mm) 3300 Useful stroke of the pushing system (mm) 3300 Max blade projection (mm) 105 Max clamps opening (mm) 105 Kdjdpfxep R Sdhe Aadow Scoring Unit (max saw diameter / power) 200 mm Main Sawing Unit (max saw diameter / power) 360 mm - Kw 18 Adjustable speed of the saw carriage (m/min) 5 - 120 Front supporting tables with Air blowing system (N.) 3 Total power (Kw) 21 (ca.)

Condition: used, Year of construction: 1998, turning length 3500 mm swing diameter 1000 mm centre height 500 mm turning diameter over slide 600 mm weight of the machine ca. ca. 8,5 t Kodpfx Ajv Hhv Ijadodw including 2 lynettes and 900mm faceplate

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm rake angle: +25° to -10 Kdsdofqicxjpfx Aadsw Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm Kjdpsfd Abajfx Aadjdw band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Ksdpfxoixntws Aadjdw Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Year of construction: 1978, condition: excellent (used), machine/vehicle number: 2751, General / technical data: Hydraulic horizontal internal broaching machine in in good technical condition Manufacturer: Karl Klink Model: RIW 6,3 Machine No: 2751 Year of manufacture: 1978 Weight: 2,3to tractive force: 6,3t broaching speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically stepless adjustable from 7m/min to 25m/min maximum stroke: 1320mm maximum workpiece diameter: max. 420mm table opening: Ø 80mm Kodpfx Aasiw Dlkododw dimensions: (w x d x h) approx. 5.700mm x 600mm x 1.900mm power supply: 380 Volt / 50 Hz / 4kW Accessories/ optional equipment: - Coolant / lubricant system - without tool feeder - Oil and chip tray (approx. 2,000mm) Remark: The machine is ideal for the production of keyways. Broaches as well as broaching mandrels can be supplied on request. The machine is ready for demonstration under power in our warehouse.

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH Type SRM 2026 - 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY Currently available at special conditions! ==> ==> Information for manufacturers or dealers with in-house production: If required, drawings, rights, spare parts, customer and prospect data, as well as planning and production documents (including designs for a 9-ton pulling force variant) for the broaching machine can be acquired from us. Please contact us if interested. ==> Our new machines are custom-built to order. Short production times and fast delivery are possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaching needles for internal gears, etc.) and accessories available upon request. Please make separate inquiries for these. Our broaching machine is compatible with broaching tools and holders from all other manufacturers! Complete production and assembly at our facility in Germany. Short-term delivery possible by arrangement. We also supply spare and wear parts (spindles, spindle nuts, motors, gears, as well as all other required components – including electrical parts) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The main area of application is the production of keyways from 3–28 mm and similarly sized profiles. This compact and space-saving machine is suitable for use in small, medium, and large operations. Its low purchase price makes it attractive even for small batch or one-off production. Drive is provided by a pole-changeable geared brake motor. The maintenance-free twin spindle drive ensures smooth operation, a central pulling point, and constant cutting performance. The open tool table allows even large workpieces to be easily positioned. In most cases, the workpieces do not need to be rigidly clamped. Stroke adjustment is via limit switches with adjustable stops. For short hubs/workpieces, multiple pieces can be stacked. Broaching needles, mandrels, and spare parts available at favorable conditions upon request. Technical Data: Pulling force: 60 kN at 3m/min; 40 kN at 6m/min Broaching speed: 3m/min & 6m/min (Optionally: stepless speed adjustment from 0–6m/min available with extended electronics) Return speed: 6m/min Stroke: 1050 mm Broaching tool length: 1200 mm Kdedjuqbnhjpfx Aadow Workpiece diameter: any Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Overall machine height: 1510 mm Drive power: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt, 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt, 50 Hz Paintwork: Exterior RAL 7035/7036/7016, Interior RAL 3000 or custom Safety door: standard equipment Coolant system: standard equipment The machine complies with the current Machinery Directive and bears the CE marking.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle power : 15 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 45 [mm] - Max. machinable length : 560 [mm] - Max. chuck diameter : 220 [mm] TURRET - Number of positions : 12 - X/Z stroke : 170 / 560 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4240 X 2000 [mm] - Machine height : 1900 [mm] - Machine weight : 4200 [kg] EQUIPMENT - CNC : Fanuc 21i-TB - Coolant tank - Chips conveyor Kdjdeuhaf Sopfx Aadew - Tool probe

Condition: good (used), Cup wheel - diameter: 175 mm Spindle projection: 180 mm Operating voltage: 400 V Kdjdpfoc Skfbox Aadsw Machine weight approx.: 300 kg Space requirement approx.: 0.90 x 0.60 x 1,80 m