Compressor

ALUP HL 1785-Z4

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° Ihjdpfx Aeucgr Ijdwjt - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Ihsdjdbgxcjpfx Adwst Tip height: 210 mm Top width: 1,000 mm equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set -Oil -Control tool -Manual

Year of construction: 2011, condition: used, Rated power: 5.5 kW Motor speed: 2930 rpm Max. operating pressure: 11 bar Dryer type: CT 8 Refrigerant: R134a Refrigerant charge: 0.260 kg Max. operating pressure (cooling system) HP 21 bar / LP 16 bar incl. Aquamat CF 3 oil-water separator Storage location: supplier Ihsdextnvkspfx Adwst

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle Isdpfsvrcqdex Adwjht About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), Year of construction: 2021, operating hours: 5,780 h, functionality: fully functional, power: 7.5 kW (10.20 HP), operating pressure: 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: water, Equipment: refrigerant dryer, type plate available, Kaeser Complete Compressed Air System - SM 13 + TA 8 + OKS (Otto Klein) For sale is a complete, fully operational compressed air system consisting of: 1. Kaeser SM 13 screw compressor (Aircenter, detailed information attached) 2. Kaeser TA 8 refrigeration dryer (please refer to the attached image for detailed information) 3. OKS Otto Klein compressed air receiver (please refer to the attached image for detailed information) The unit already features an integrated tank and built-in cooler. Additionally, the package includes a separate cooler and compressed air receiver, as shown in the images. This means that both the internal equipment and the supplementary accessories are included in the delivery scope. The system has been regularly maintained, is in excellent, ready-to-use condition, and is immediately available for operation. Iodpfx Adoxwbdvjwsht Our Service Commitment: We prioritize quality, expertise, and customer satisfaction above all else. Our team is composed of qualified and experienced technicians who specialize in Mazak machinery as well as other machines. We place great importance on personal service and are happy to assist you even after the purchase. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information subject to change. No liability for errors or omissions.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, turning diameter: 1,500 mm, Versatile turning and machining center for full-scale turning and complex drilling and milling. Turning diameter 1500 mm Center distance 4500 mm X travel 1000 mm Y travel 350 mm Z travel 5000 mm - 4-track bed-type machine - Powerful headstock with backlash-free C-axis - Full-featured milling in 3 axes (Y-axis = 340 mm) - Direct measuring system on each CNC axis - Continuously adjustable motorized milling spindle - Klaassen motorized milling spindle 37 kW/4000 rpm/330 Nm (S1) Ihsdpfswkqhgox Adwot - Automatic tool change for turning and milling tools - Steady rests and tailstock fully traversable - Internal milling head - Grinding support - Extensive range of accessories available The machine has been regularly serviced and is in very good technical condition. Technical drawings and parts lists are available for the machine's components and assemblies. Documentation and technical data are available for all components of the machine.

Condition: used, Year of construction: 2010, operating hours: 76,256 h, functionality: fully functional, Equipment: type plate available, Frequency-controlled compressor New oil and filters Compair Type: L22SR-7,5A V2 Ihjdpfswvac Rsx Adwot Volume flow: 3.53 m³/min Pressure: max. 10 bar Motor power: 22 kW Year: 12/2010 Operating hours: 76,256 Weight: 355 kg A suitable refrigeration dryer and 2000L compressed air tank can be purchased separately. The machine can be demonstrated under power on site. All information provided without guarantee. Errors and interim sale excepted.

Condition: like new (used), Year of construction: 2011, Equipment: refrigerant dryer, Kaeser SM 9 Screw Compressor Manufacturer: Kaeser Model: SM 9 Year of manufacture: 2011 Ihsdpsxt Rdksfx Adwst Max. operating overpressure: 11.0 bar Rated power: 5.5 kW Refrigeration dryer TA 11 included Year of manufacture: 2011

Condition: good (used), Year of construction: 1985, machine/vehicle number: 31601, turning diameter over cross slide: 18 mm, spindle bore: 38 mm, turning diameter: 280 mm, turning length: 550 mm, total length: 1,400 mm, total width: 900 mm, total height: 1,800 mm, overall weight: 800 kg, - Equipped with tailstock, Multifix tool holder - Includes HEIDENHAIN digital readout Ihsdpfowxq U Asx Adwet

Year of construction: 2015, condition: ready for operation (used), Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible. Ihjdpjxxzibefx Adwjt