High-performance pillar drilling machine

ALZMETALL AB 6 S

Condition: used, bore capacity in steel (diameter) 40 mm throat 325 mm bore stroke 170 mm Bcjdswn T A Uepfx Ag Nsw table surface area 730 x 590 mm

Condition: repair required (used), Year of construction: 2013, operating hours: 33,439 h, - Volvo L180G Bcedpfx Agsu Ef Hre New - Year of production 2013 - Mileage 33,439 Mtg - Transmission after major overhaul - 340 mtg. - Engine compartment burnt out - condition shown in photos

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm Bcjdegulr Hjpfx Ag Njw table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Weight: 132 kg

Condition: used, Year of construction: 1991, operating hours: 17,500 h, Operating hours: 17,500, First registration: 26.06.1991_____Operating hours: approx. 17,500, Year of manufacture: 1991, ENGINE Max. output 81/110 kW/hp, Max. torque 373 Nm, 6 cylinders, 6.2 l MWM, 135-litre fuel tank, TRANSMISSION 40 km/h, HYDRAULICS 3 double-acting spool valves, PTO 540 / 750 / 1,000, front PTO, LINKAGE EHR – Electronic hitch control, quick-adjust front linkage, FRONT & REAR AXLE All-wheel drive, BRAKES Dual-circuit air brake system, TYRES 14.9 R26, 520/70 R38, DRIVER'S CAB Standard cab with suspended seat, OTHER Front loader brackets, cab protection bar, Storage location: none Bcjdex Egq Repfx Ag Now

Condition: used, Year of construction: 1999, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 Bcodjva Hmrjpfx Ag Now spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m Column drilling machine with infinitely variable speed adjustment and automatic feed. Tapping with changeover switchEquipment: RÖHM 3 - 16 mm chuck, operation by foot switch left/right *

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Bodpfx Ast Ipi Ieg Nocw Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t Bsdpfjg Ip Efjx Ag Nocw cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: used, CNC flame cutting machine BACH type ACW 2500 Flame cutting machine with CNC control NBS 400 Machine. No. 14 561-06 Year of construction 2006 Cutting area 2500 x 6500 mm track length 8000 mm Track width 3345 mm Track height 650 mm 2x machine cutting torch Bsdsf Ncadopfx Ag Necw with cutting table

Condition: good (used), functionality: fully functional, empty load weight: 6,500 kg, overall weight: 18,000 kg, tire size: 580/65 R22.5, Year of construction: 1996, Model: 16000TS 16.000 liters with suction Bcedpfstq Uurex Ag New

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 Bodpfx Asnzpx Reg Necw -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg