Pillar drill

ALZMETALL AB 60 HST

Condition: excellent (used), Year of construction: 1986, Conventional lathe, make: VDF HEIDENREICH&HARBECK, model: 540 Hamburg, year 1986. In very good original condition with 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes including the compound slide. Equipped with coolant system, swarf back panel, and machine documentation. 315 mm Forkardt chuck. Swing diameter: 540 mm. Turning length: 1500 mm. Spindle bore: 103 mm. Spindle speeds: 9–1800 rpm. Multifix C tool post. Fixed steady rest. Swarf protection cover. For further details, see the technical data sheet. Space requirement: length 3.8 m, width 2 m with back panel, height 2 m with back panel. Weight approx. 3500 kg. Bedpfx Agex Hr Duekswi

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg Bsdpen N Ekcsfx Agkowi good condition

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - SPECIAL SET for SIEGMUND 28er clamping tables - ORIGINAL SIEGMUND accessories (!!) included in the scope of delivery : - 1x 280910 .. 28 mm - mobile tool trolley incl. rollers - 8x 280410.N .. Universal stop 150 L nitrided - 4x 280420.N ... Universal stop 225 L nitrided - 2x 280162.N ... Stop and clamping bracket 500 G left nitrided - 1x 280166.N ... Stop and clamping bracket 750 G left nitrided - 1x 280167.N ... Stop and clamping bracket 750 G right nitrided - 1x 280164.N ... Stop and clamping bracket 500 G left nitrided - 1x 280165.N ... Stop and clamping bracket 500 G right nitrided - 4x 280152.N ... Stop and clamping bracket 300 G left nitrided - 16x 280610.N ... Professional screw clamp, nitrided - 6x 280630.N ... Professional screw clamp 45°/90° nitrided - 8x 280651.1.N .. Prism Ø 60-135° nitrided - 8x 280110.N .. Stop and clamping angle 175 L nitrided - 30x 280511 .. Quick-action clamping bolt, double without groove, burnished - 4x 280430.N .. Universal stop 500 S nitrided - 1x accessory set consisting of: - Eccentric, Allen key, brush, Bwsdpjxabvdefx Agkoi - further accessories such as: Probe CleanBasic, Probe Anti-Stick and torch holder

Condition: good (used), Year of construction: 2000, turning diameter 340 mm Bodpfxevwgpbo Agkewi turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: used, Year of construction: 2013, turning diameter over bed slide: 435 mm, turning diameter over top slide: 245 mm, center height: 210 mm, center width: 1,500 mm, overall weight: 1,700 kg, Technical data Manufacturer: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Bjdeykakpepfx Agkjwi Centre height: 210 mm Centre distance: 1,500 mm Spindle bore: 52 mm Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions (approx.): L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Stepless speed control • HEIDENHAIN digital readout on 3 axes • 3- and 4-jaw chucks, manufacturer Röhm Duro • Multifix toolholder + 10 inserts • Collet chuck Fahrion + approx. 33 collets • Fixed and travelling steady rest • Various live and dead centres + drill chuck • Coolant system • Documentation HEIDENHAIN ND 780 digital position display • 3-axis readout for bed, cross slide, and top slide • Tool memory for 16 tools, with one reference point per axis • Summation key for Z and Zo • Switchable between imperial/metric • X-axis traverse as radius or diameter display • Delta key for "distance-to-go" display to zero • Display resolution up to 1 µm • "Freeze" actual position • Taper calculator All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2020, x-travel , mm y-travel , mm z-travel , mm STM MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for demanding cutting tasks. MasterCut waterjet systems offer the ability to create three-axis 3D cuts or sophisticated 2D cuts. The systems operate in a resource-efficient manner and are characterized by extremely low power, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Characteristic features include the flat underbody and smooth side walls with concealed linear guides without bellows and a high-pressure pipe integrated into the axes. The fully digital drive consists of a brushless AC servo motor with a multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and requires only a standard PC. ----- Advantages of MasterCut waterjet cutting systems Highest process reliability Automatic workpiece scanning and collision protection enable safe working. STM waterjet cutting systems can be marked as standard, and the use of the positioning laser allows for easy workpiece setup. Profitable and sustainable STM systems are characterized by low operating costs. The waterjet cutting systems are designed to use as little compressed air, electricity, and water as possible. SmartCut cutting software The easy-to-understand SmartCut waterjet cutting software can be adapted to your specific requirements through modular extensions. All parameters can be intuitively set and DFX files can be imported directly within the graphical user interface. Bodoxtqxbspfx Agkewi Maximum operating comfort STM waterjet cutting systems are accessible from three sides. Control is via a standard Windows PC, and additional features such as manual control enable maximum operating comfort. ----- Technical specifications: Travel speed 15 m/min Positioning accuracy ± 0.08 mm (per meter at 20°) Repeatability ± 0.05 mm (per meter at 20°) Z-axis clearance 180 / 240 mm ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, Year of construction: 1998, throat 290 mm bore stroke 180 mm total power requirement 1,9 kW Bjdpfew D Hi Tex Agkjwi

Condition: new, Load Weight Shelf 24000 kg Bjdpfofgyhgsx Agkjwi Loading weight per level 2000 kg Number of load levels 2 x 6 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm dimensions m

Condition: new, Load Weight Shelf 20000 kg Loading weight per level 2000 kg Number of load levels 2 x 5 Stk. Recommended material length 6000 mm Column width 3000 mm Bwodpfxsfgyg Tj Agkji Shelf height 2440 mm dimensions m

Condition: new, Column Drilling Machine Brand: MAXION Model: Unimax 3 Year of manufacture: 2002 – workshop tested Machine no.: 201835 Spindle speed (stepless): Range A 80 – 1,440 rpm Range B 180 – 3,200 rpm Normal drilling capacity: 30 mm Spindle taper: MK 3 Standard equipment includes: - Full motor protection - Reversing switch for right/left rotation - Digital speed display - Table adjustment via rack and pinion - Emergency stop button - Operating manual Used as seen, without warranty. The machine corresponds technically Bjdpfoxr Da Aox Agkswi to the state of the art at the time of manufacture.