Screening machine

ASCO VS Big Two Deck

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: SRS CW 2000 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing the surfaces of metal, stone, and concrete. Delivery to Germany/Austria. As a service provider in the field of surface treatment, we can offer you machines that meet your needs! Dwodpfx Adotxlyrerea Transportation costs: depend on your location and delivery conditions. Delivery: 4 weeks of working days after payment receipt by air freight. - Air freight: approximately 2 weeks. The equipment is NEW and is configured and adjusted according to customer requirements! The configuration and price depend on the customer's requirements and application area. We offer professional training in the use of the equipment in accordance with UAVA/UVV standards in Austria and Germany. As we are a service provider and work with the equipment, we can also guarantee that it functions properly. We offer comprehensive on-site training or in workshops/customer-oriented demonstrations. Payment: LEASING / FINANCING / PURCHASE Technical parameters: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser length: 1064nm or 1080nm ±5 Frequency: 10-50KHz Air or water cooling Net weight: approx. 170kg Size: 98 * 122 * 143 cm Scan width: 5-50 cm Functions: Handheld or automatic Operating temperature: 0-40°C Operating mode: CW Wavelength Nm: 1025-1070 Standard output power: 15KW Laser beam quality mm*mrad: 4 Adjustable frequency Hz: 400 to 50000 Diameter of transmission fiber: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature °C: 5~35 GUARANTEED at the BEST PRICE!!! - RENT / LEASE / PURCHASE All equipment is exclusively assembled and delivered according to your requirements and our experience. - Demonstration - 24-hour support - Incl. maintenance & service & repair We also offer the following with the equipment: INDIVIDUAL training according to the UAVA/UVA safety regulations for the operation of laser machines for surface treatment. Safety-related consulting according to occupational/safety regulations for the use of laser equipment. Regular inspection of the safety regulations according to the applicable regulations.

Condition: excellent (used), Year of construction: 2021, operating hours: 8,000 h, functionality: fully functional, turning diameter: 380 mm, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 234 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 625 mm, mount diameter: 40 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, rotational speed (max.): 5,000 rpm, torque: 465 Nm, bar passage: 65 mm, workpiece weight (max.): 300 kg, total height: 1,857 mm, total length: 2,760 mm, chuck outer diameter: 203 mm, total width: 1,835 mm, bar diameter (max.): 65 mm, swing diameter over bed slide: 695 mm, overall weight: 5,600 kg, Equipment: chip conveyor, fume extraction, CNC lathe MAZAK Quick Turn 200MY (year of manufacture 2021) You are welcome to inspect the machine while it is powered on at our facility. If you are interested, we will send you demonstration videos of the machine. The MAZAK Quick Turn 200MY is a powerful CNC lathe for the precise and efficient machining of chucked parts in a universal application (500U). With a maximum swing diameter of approximately 695 mm and a maximum machining diameter of approximately 380 mm, the machine is particularly suitable for demanding turning operations in general mechanical engineering as well as in series and single-part production. The robust design with travels of 234 mm in the X-axis and 625 mm in the Z-axis, as well as a bar capacity of approximately 65 mm, enables the flexible accommodation of a wide variety of workpiece geometries – with a maximum payload in chucking operations of 300 kg and a maximum loading weight of 500 kg. The powerful main spindle with an 8″ chuck size and up to 5,000 rpm ensures high cutting performance and precision. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, fast programming, and high process reliability. The 16-tool turret (VDI 40, quick-change function) enables flexible and efficient machining processes, even for complex manufacturing tasks. The tailstock (MT No. 5, 550 mm travel) provides additional secure support for long workpieces. Dsdpfx Adszkbfgorswa For further process reliability and automation, the machine has an automation package (part catcher as well as interface/connection option for robots and bar feeders). An LLS coolant mist extraction system (low maintenance costs) and a chip conveyor from Mayfran also ensure optimal production conditions. With a machine weight of approximately 5,600 kg, the Quick Turn 200MY offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, it is a modern and versatile CNC lathe that guarantees high precision, performance, and reliability in industrial production. On request, we offer delivery as well as commissioning of the machine in a comprehensive, worry-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, Type: KQ 14/38-2.5 Dedpfx Adjtgpf Hsrswa Screening area: 1,400 x 3,800 mm without screen panels including 15 kW electric motor with new semi-mobile steel construction and new discharge chutes

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Djdoqakhuepfx Adrewa Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,000 h, functionality: fully functional, CNC turning center Doosan Puma 700 XLY II Turning length: 5,050 mm Turning diameter: 700 mm with driven tools and Y-axis Basic equipment: - CNC control Fanuc 0i with Manual Guide i - 45" inclined bed in tubular construction - Main spindle with 4 bearings. Spindle bearing accuracy class P 4 - Lifetime lubrication - Internal clamping device hydraulically actuated with internal clamping cylinder complete with safety device, coolant collection tray, stroke control and draw rod - Automatic central lubrication - Tailstock programmable - Flat bed guides hardened and counter surface coated with Rulon 142 - Coolant system with 7 bar delivery pressure - Guide rail cover Z-axis - Full enclosure - Watertight work area lighting - Integrated alignment screws and mounting plates Including Doosan options: - Tailstock programmable (towed by the turret) - Oil skimmer - Coolant system with 14 bar delivery pressure - Electronic tool breakage monitoring - Automatic tool measuring arm - 3-color warning light - Clamping force monitoring - Additional handwheel - NC option Arbitrary Speed Threading - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; straight ER50 - 2x Drilling & Milling head BMT 85 CC PRECI-FLEX; angled ER50 - Preparation for programmable hydraulic steady rest (includes complete basic body, connected to open/close the steady rest via M-function and the basic body can be automatically positioned in the Z-direction, towed by the cross slide without the steady rest) Schunk ROTA NC 630-180 2520-Sv90" Chuck diameter 630 mm Manufacturer Schunk with involute gearing 90" incl. flange and draw rod adapter Steady rest RX6-ZSW-100520 50-SCUW-95 self-centering, hydraulic steady rest, sealed housing (proofline), measuring system for clamping range monitoring (SCU-V), integrated flushing channels / chip protection, flushing nozzles, extra compact design, integrated cylinder with pressure converter. Clamping range from 100mm to 520mm Brinkmann pressure boosting pump 30 bar incl. 50p Mahle filter Dwsdpezlcyuefx Adroa approx. 30 bar, can be switched on via M-function incl. cartridge filter Coolant gun with its own pump Coolant gun for cleaning the work area when the door is open In automatic operation without function Hinged belt chip conveyor, discharge on the right, inclination angle 50 degrees, discharge height 1150 mm Chip cart Type SKM750; 0.75m3 volume; 1000kg load capacity; with rollers and forklift pockets

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor Dwedpfx Adjx D Nd Dorea • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Djdpsua Tbwsfx Adrjwa Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Dedpfx Adszmfxijrswa Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: good (used), Year of construction: 2019, operating hours: 19,000 h, functionality: fully functional, 2019 HELLER H6000 CNC Double-Pallet Horizontal Machining Center CNC horizontal machining center with double pallet Low operating hours, single-shift machine, excellent condition Manufacturer: HELLER Model: H6000 Year of manufacture: 2019 Machine type: CNC horizontal machining center Pallet system: Double pallet / 2-pallet system Serial number: MXXXXX (upon request) Pallet size: 630 x 630 mm Maximum pallet load: 1,000 kg Maximum workpiece height: 1,200 mm Travel distances: X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 360° / 0.001° indexing Rapid traverse speeds: X-axis: 50,000 mm/min Y-axis: 50,000 mm/min Z-axis: 75,000 mm/min B-axis: 25 rpm Feed forces: X-axis / Y-axis: 15,000 N at 40% duty cycle Z-axis: 20,000 N at 40% duty cycle Spindle speed range: 5 – 6,000 rpm Spindle drive power: 60 kW at S6 / 40% duty cycle Dwedpfx Adsy S S Hysrea Maximum spindle torque: 2,292 Nm at S6 / 40% duty cycle Spindle taper: HSK 100A Automatic tool changer: 50 positions Maximum tool diameter: 280 mm Maximum tool length: 600 mm Maximum tool weight: 25 kg Condition: The machine is in top condition, has low operating hours, and can be inspected immediately. The machine is available for short-term delivery.

Condition: excellent (used), Year of construction: 2022, operating hours: 4,605 h, functionality: fully functional, Controller: FANUC 31i-B5 Max. turning diameter: ø540 mm Max. turning length: 1.020 mm Spindle bore / bar capacity: ø76 / 65 mm Y-axis travel: 170 mm (±85) Milling spindle: 12.000 rpm, 18.5 kW Tool magazine (ATC): 80 stations, Capto C6 Tool change time: 2.0 s Dodpfx Aozilupedrswa Counter spindle: 5.000 rpm, 22 kW Spindle power: 22 / 18.5 kW (S1/S6)