Center grinder

ATG45 centrująca środkowa

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4304, rotary table diameter: 600 mm, grinding height: 450 mm, overall weight: 14,500 kg, Machine is equipped with 3 spindles, surface grinding, external grinding, bore grinding Blodpfx Akevt A Rts Heg Turret head B-axis with 1° division Belt filter system included

Condition: good (used), Year of construction: 1984, Grinding wheelhead: - motor power : 2,2 kW - spindle speeds : 1 000 - 8 000 rpm - spindle inclination (A-axis): -10° up to +27° - setting accuracy 1 min - height adjustment (Y axis) : 130 mm - stroke range (X axis) : 220 mm - oscillation stroke, steplessly adjustable during oscillation : 0-30 mm - oscillation frequency : 30/60 1/min Blsdpsvmpabjfx Ak Heg Workhead: - radius setting (Z axis) : 0.01-50 mm - setting accuracy: 0,01 mm - retraction of slide from the grinding to the measuring position : max. 49 mm - cross table, clamping surface : 155 x 205 mm - travel X - Y : each 60 mm - maximum swivelling angle (B axis): 260° - supply voltage : 380 V - weight : 1200 kg Accessories/options: - grinding pressure variable - projector fixed in measuring position - 1 cabinet with accessories - different grinding wheels, flanges - coolant tank - documentation Under power in our warehouse.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 1,800 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 180 kg, We are selling a refurbished Wenzel WGT350 XL rack and pinion measuring machine. The machine can be used to measure gears and racks. Bodpfx Akjvitkio Hslg - Max. Rotary table workpiece diameter = 5 to 400mm - Max. Rotary table load = 180kg - Travel X= 1800mm Y=200mm Z=650mm - Counterholder measuring range = 20 to 900mm - Module measuring range from 0.5mm - Max. Max. rack length = 1200mm - 6x probe changer incl. 6x SP600M plates - Temperature compensation of the machine - Active air damping of the machine - Year of manufacture 2006 - Accessories such as, driver, reference ball etc. as shown - Jaw chuck D=200mm with inside and outside jaws The following software modules are included: - TMain - program management - TStylus - Probe management - TCali - probe calibration - TAmo - Calculated axis position determination - TGear - Cylindrical gear measuring program - TShaft - Program for dimension, form, position and scanning of unknown contours - contours - TWorm - Worm measuring program - TRack - Rack software - TReverse - The parameters of an unknown gear, module (mn), helix angle (ß) and pressure angle (a), can be determined with TReverse. can be determined. - Statistical program, statistical evaluation for spur gear, bevel gear and worm gear testing. worm testing For further information, please contact us by e-mail.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Blsdeyh R Uwjpfx Ak Hjg Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, type of input current: three-phase, The beveling machine shown in the picture is for sale, in working condition, with all its tools included Bjdpfx Aoxur Adok Hjlg

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Bedpfx Aertrzdok Hslg Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: used, overall weight: 4,95,000 kg, Year of construction: 1991, Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Workpìece weight: 2500 kg Min length: 1500 mm Max length: 3000 mm Bljdpfjv D Ddvox Ak Heg Engine forge: 2 x 500 kW, 5500 V, 50 Hz Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Weight: 16 t Working area Centre distance: 3,000 mm Cross slide diameter: 650 mm Bedpfx Akeychzme Holg Bed diameter: 700 mm X-axis travel: -15 ... +335 mm Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading 400V, 50Hz

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Empty weight: 2.500 kg Bodpfx Akjwniike Helg - Year: 1959 - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Control: Conventional - Motor power: 5.0kW - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, Technical details: rotor dia: 30-500 mm hobbing length: 500-1000 mm total power requirement: 80 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 3,6 x 2,5 x 3,0 m max. module: 8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel Bjdpfx Akjv Hrp Eo Helg *