Used Drill systems for sale (108)
Sort results
- Lowest price Highest price
- Latest listings Oldest listings
- Shortest distance Farthest distance
- Latest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Latest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Latest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation A to Z
- Designation
- designation Z to A
- Designation
- Model A to Z
- Model
- Model Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest running time
- Runtime
- Relevance
- Relevance
Listing

3,859 km
Well drilling rig
PRIDETITAN 80 Diesel EURO5
Call
Condition: new, Functionality: fully functional, fuel type: diesel, Year of construction: 2025, Hydraulic drilling rig for drilling water wells, geophysical survey, and injection wells up to 200 m deep.
Powerful, compact rig to solve serious problems!
Any configuration is possible based on your drilling aim and budget.
_____
✅ TITAN series - self-propelled, on a tracked platform;
✅ American engine conforming to the EURO5 standard;
✅ Independent drives for more flexible control.
____
👉🏻The hydraulic drilling rig is used for drilling water wells up to 200 m deep, including inclined, geological surveys, drilling holes for installing fences, foundations, engineering surveys, screwing piles, carrying out construction work.
Dq0Y72
The drilling rig is equipped with a drilling mud supply unit for flushing or compressed air supply for purging and air hammer operation.
The installation is easily controlled using a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool.
The installation can be equipped with
- remote control panel;
- hydraulic auxiliary winch;
- hydraulic outriggers;
- drilling pump;
- casing table;
- a descent/ascent overcoming system with an angle of up to 45 degrees (for the TITAN series on a tracked platform)
_____
Specifications:
📌 OPERATING
Max. initial diameter, mm - 300
Max drilling depth, m - 200
Dimensions, mm:
- Length 6055
- Width 1570
- Height 2600
Mass, kg - no more than 6000
📌 SWIVEL
Type - Hydraulic oil motor with mounting group
Rotative moment, (Nм) - I gear up to 2000 / II gear up to 1000
Rotation speed, (sev/min) - I gear up to 150 / II gear up to 300
MAST Pulling force, (kg) - up: 4000 / down: 3000
Carriage movement, (mm) - 3360
Speed, m/sec - 0,13
📌ENGINE
Type - Kohler KDI2504TCR, diesel, 74 hp
Cooling system - Liquid
📌 CHASSIS
Type of crawlers - rubber-metal
Width of crawler, mm - 260
Speed, km/h - 6
📌OPTION MODULE
• Hydroclamp of drilling pipe optionally
• Hydroclamp of casing pipe optionally
• Hydraulic casing oscillator optionally
• Mechanical outriggers optionally
• Wrench optionally
• Anchoring system optionally
Listing

6,760 km
Drill
DelmagSR 25 BT / RH 18 op Sennebogen SR25 met ABI MDBA 3500 grondverbeteringsinstallatie
Call
Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 - Delmag - SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill with 5834 hours . Our expert inspector checked 65 inspection points - 65 were approved, 0 showed imperfections, 0 presented issues. Buy it now for EUR 220.000 or make us an offer. We can deliver from Uelzen, Germany to your destination. You can estimate the cost using our price calculator.
Inspector comment:
Machine for concrete pile drilling, soil improvement, and vibro-compaction. Carrier unit Sennebogen SR25BT (year of manufacture 2008) with drill attachment Delmag RH18 (year of manufacture 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Pulling winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT AVAILABLE, PURELY SOIL IMPROVEMENT MACHINE, drilling gear MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, alignment automation. Hydraulic telescopic chassis with a width of 3.0m to 4.40m. The CAT C9 engine was overhauled in 2015 at BH 3,304 by CAT. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m³/h), feeding screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of operating hours. At the time of inspection in 2023, it was operational and tested but not under load. After repairs of some electronical issues from the long time it has been out of operation and a regular maintenance the machine will be ready for use.
- Year: 2008
- Weight: 52500kg
- Serial Number: 525.6.312 und 974
- Sold from: Uelzen, Germany
Contact us for more information and a FULL INSPECTION REPORT with detailed pictures, a video and the final price including delivery to your country.
Buying with Equippo is easy:
* Fully inspected machines
* Delivered to your jobsite
* Money Back Guaranteed
* Safe payment methods with possibility to pay at delivery
Do you have machines to sell? Contact us!
Xblubxytm
Questions? Our sales agents are ready to help
Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!
Listing

7,087 km
Drilling machine
OmecF 9 TS F
Call
Year of construction: 2016, Condition: used, - Year: 2016
- Documentation available: No
- CE mark available: Yes
- Serial number: 160099
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Dq8Zpj
Delivery and trade-in always possible for everything in the industrial sectors
Glenn Smeets

Find out now
+44 20 806 810 84
+44 20 806 810 84
Create listing
*per listing / month
Auction

5,861 km
Soil drill
WirthB0A NR.595
Condition: used, Year of construction: 1986, Field of application: Construction
Auction item.
Drilling rig in working condition.
Drills to 150 meters depth.
Colony cutting technique with the help of tech water.
There is a centrifugal pump that pushes the water.
Dq7Jpv
With 90 m. pipes (1 pipe 3 m. long)
Full documents.
Deutz engine.
Cooled by hydraulic fluid.
200 l. capacity for the hydraulic fluid.
After full engine repair was working about 6 months.
Now standing one year not used.
Listing

6,159 km
Horizontal drilling rig
VermeerD10X15 Series 3 / 2019 / 3555MTH / 1 OWNER / SERVICE!
Call
Condition: ready for operation (used), operating hours: 3,555 h, for sale this time directly from Germany from the first owner Vermeer D10X15 Series 3 horizontal drilling rig! the drill is characterized by a fabric cabin and low weight. Used by a large company in Germany that only does drilling for the whole of Germany! Regularly serviced and ready for further work. rubber tracks in very good condition as well as rods all are little used in 2024 a set of new rods. the machine like all ours checked on site and in very good condition! we are a Subaru dealer here in Poland but deals with professional sale of Vermeer drills and equipment! we also offer servicing of Vermeer machines.
Dq8Tb9
Discover more used machines
Listing

7,096 km
Soil drill
Atlas CopcoD3 m/ 1838 hammer WATCH VIDEO
Call
Condition: used, Year of construction: 2008, Field of application: Construction
Serial number: 8992 005xxxx
Please contact ATS Norway AS for more information
Please provide reference number upon request: 16777
Specifications:
Dqrti9
- 2008 model
- 9800 engine hours
- 2916 hammer hours
- New chassis
- 1838 hammer
- Commuting on undercarriage
- Tower shifts
- Services taken yourself
- Rod holder
- Width of belt plates: 30 cm
- Machine width: 233 cm
- Video
- Ready for delivery
Description:
Atlas copco D3 for sale.
Everything works as it should and the undercarriage has been replaced.
All services are carried out by the owner.
Ready for delivery.
Listing

3,859 km
Well drilling rig
PRIDEBA-15 Rotary
Call
Condition: new, Year of construction: 2025, The drilling unit BA-15 is designed for drilling wells for various purposes:
✅ structural exploration wells;
✅ oil and gas wells;
✅ hydrogeological and operational drilling of water wells.
☛ Drilling is carried out by the rotary method in soft and medium-hard rocks, with direct flushing of the face in macroclimatic areas with temperate and cold climates.
☛ The ambient temperature regime for the operation of the installation: from -40C ° to +40C°. Due to the installation of equipment on trailers, the drilling rig has greater maneuverability, which is convenient for transportation, and also reduces the time for installation /disassembly.
☛ The design of the BA-15 drilling rig allows the use of drilling and casing pipes up to 12 meters long and casing pipes up to 360 mm in diameter without removing the rotor.
☛ At the request of the consumer, all BA-15 type installations can be additionally equipped with:
• a pumping and power unit;
• compressor unit for well development;
• compressor and power unit (compressor, generator, welding transformer) on a trailer for well development, supply of the unit with electricity, provision of welding operations and emergency drive of the drilling unit;
• a tool block for transporting drill pipes and other additional equipment.
_____
Specifications:
☑ Power drive Diesel engine - YAMZ-236/238 with gearbox.
☑ Conditional drilling depth, m:
- pipes with a diameter of 60.3 mm; 63.5 mm - 500-700
- pipes with a diameter of 73 mm; 89 mm - 300-500
☑ Recommended pipe drilling diameter, mm: 60.3; 63.5
- initial, mm - 243
- final, mm - 93
☑ Recommended pipe drilling diameter, mm: 73; 89
- initial, mm - 394
- final, mm - 190
☑ Load capacity, kN - 200
☑ Rotator
Rotator type - rotary
Maximum torque on the spindle, N*m - 7 850
Rotation speed of the rotary system, rpm - 2.16
☑ Winch
Type of winch - single drum
Dq0Yw9
☑ Mast
Mast type - Steel, welded
Recommended pipe length, m - 6- to 12
☑ Pumping equipment
Power, kW - 50
The largest volume flow of the drilling pump, m3/h - 23.4
The highest pressure at the outlet of the drilling pump, MPa - 6.3
☑ Generator set
Power, kW - 35
Regulation limits, A - 60-430
Listing

6,163 km
Rotary drilling rig head
YBM CO. LTDDRIFTER VD-SM401
Call
Year of construction: 2007, Condition: new, The new and unused rotary head for drilling rig machines.
Manufacturer: YBM CO. LTD
Model: DRIFTER VD-SM401
8Rirym8Rkq
The dimensions of the head on palette:
1700x1300x850 1270 kg
Listing

7,087 km
Drilling machine
Imperator
Call
Condition: used, Column Drill
Model: Conventional
Manufacturer: Imperator
Capacity: 23mm
Drilling depth: 120mm
Spindle speed: 250-1500 rpm
Maximum reach: 210mm
Table: 400x400mm
Motor power: 0.8kW
Machine dimensions: 700x550x1750mm
Machine weight: 200kg
Dq7Cvh
- Documentation available: No
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Bram van Summeren
Listing

6,930 km
Core drill
NortonØ 150/470 mm
Call
Condition: good (used), core drill, crown drill, stone drill, core drilling machine, diamond core bit, core bit
Qlxh0Nbcw
-Core drill: Ø 150 mm
-Drill length: 470 mm
quick-change mount
-Weight: 5 kg
Listing

6,159 km
Horizontal drilling rig
VermeerD36X50 S2 / 2011 / 2228MTH / SERVICED!
Call
Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,228 h, for sale directly from our partner from Belgium, Vermeer D36X50 series 2 from 2011 with low original mileage of 2228 operating hours! the drill rig like all that we offer are checked and listed by us. a number of satisfied customers will confirm this. This drill rig is available for your own collection from Belgium or we offer delivery to the company/base as we do to every customer. At this price from the advertisement Drill rig with a set of rods plus additional 34 and a separate box. We are a Subaru dealer in Poland but we cooperate with Vermeer Dealers throughout Europe! More information from the seller!
Biif2Awyly
Listing

7,184 km
Soil drill
ABISM14/18HD
Call
Condition: used, Year of construction: 2010, operating hours: 13,808 h, Equipment: air conditioning, General information
Field of application: Construction
Serial number: F056742
Drivetrain
Drive: Track
Make of engine: C18
Weights
Empty weight: 77.200 kg
Other information
EPA Marked: yes
EPA Marked: yes
Emission level: Stage IV / Tier IV final
Delivery terms: EXW
Dq2Ksr
Transport dimensions (LxWxH): 20,8x3x3,6
Production country: DE
Additional information
Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information
Listing

3,859 km
Well drilling rig
PRIDETITAN 120
Call
Condition: new, Functionality: fully functional, fuel type: diesel, Year of construction: 2025, Hydraulic drilling rig for drilling water wells, geophysical survey, and injection wells up to 250 m deep.
Powerful, compact rig to solve serious problems!
Any configuration is possible based on your drilling aim and budget.
_____
330Jayb8G
✅ TITAN series - self-propelled, on a tracked platform;
____
👉🏻The hydraulic drilling rig is used for drilling water wells up to 250 m deep, including inclined, geological surveys, drilling holes for installing fences, foundations, engineering surveys, screwing piles, carrying out construction work.
The drilling rig is equipped with a drilling mud supply unit for flushing or compressed air supply for purging and air hammer operation.
The drilling rig is easily controlled using a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool.
The installation can be equipped with
- remote control panel;
- hydraulic auxiliary winch;
- hydraulic outriggers;
- drilling pump;
- casing table;
- a descent/ascent overcoming system with an angle of up to 45 degrees (for the TITAN series on a tracked platform)
_____
Specifications:
📌 OPERATING
Max. initial diameter, mm - 300
Max drilling depth, m - 200
Dimensions, mm:
- Length 5400
- Width 1600
- Height 2300
Mass, kg - 1800
📌 SWIVEL
Type - Hydraulic oil motor with mounting group
Rotative moment, (Нм) - 2000 (optionally till 6000)
Rotation speed, (sev/min) - I gear 0-330 / II gear 0-165
MAST Pulling force, (kg) - up: 5000 / down: 2000
Carriage movement, (mm) - 1000-3500
Speed, m/sec - 0,43; 0,42
📌HIGH-PRESSURE PUMP STATION
Type - Diesel Power, 105 hp
📌 CHASSIS
Type of crawlers - rubber-metal
Width of crawler, mm - 260
Speed, km/h - 6
📌OPTION MODULE
• Hydroclamp of drilling pipe optionally
• Hydroclamp of casing pipe optionally
• Hydraulic casing oscillator optionally
• Mechanical outriggers optionally
• Hydraulic outriggers optionally
• Wrench optionally
• Anchoring system optionally
Listing

5,913 km
Drilling rig
Atlas CopcoMustang 4F1
Call
Condition: good (used), Functionality: fully functional, power: 87 kW (118.29 HP), fuel type: diesel, fuel tank capacity: 80 l, overall weight: 8,350 kg, Year of construction: 2011, operating hours: 6,000 h, machine/vehicle number: CRG108371810-1, Equipment: crane, gripper hydraulics, hydraulics, rubber tracks, Atlas Copco drilling rig MUSTANG 4 - F1 Composed by:
DRILL MAST BMI 3.9 HD - New roller type incl. chain feed, hyd. feed motor with gear reducer and neg. brake,
Force on the Feed beam 85 kN
Brl7V7C33La
Feed and retract force on Rotation Head 47 kN
Feed length ..... 3900 mm
Total length..... 5650 mm
Feed rate speed..... 26m/min
HOSE REEL. FOR FEED BEAM 3.9 and 3,9HD for guiding hyd. hoses to power head.
OFF-HOLE SHIFT, hyd. operated, allows rotation head to move laterally 270 mm
SERVICE CONTROL PANEL with valves laterally mounted
DRILLING CONTROLS mounted on flexible arm
SILENCED POWER UNIT with 2 hydraulic pumps A10V+A10V,
Engine Deutz D 914 L06 2V step III, air cooled diesel engine rated 86,5 kW, 2300 rpm, 24V El. and safety system, oil tank 180l, filling pump, filter unit , fuel tank 80l and piping. Electrical oil cooler incorporated.
MAST ATTACHMENT with hydraulic elevating device (double cylinder) and clamp for drill mast.
ATTACHMENT for FEED HD type with 500 mm feed advance cylinder
CRAWLER, U-F25-1-67 (7 rollers) hydraulically driven, with Rubber pads, Ground clearence 310mm
Track width: 300 mm
Track length: 2570 mm
Crawler width: 1950 mm / Rig width 1950 mm
Weight: 1050 kg crawler / 6300 kg rig
Max inclination: 30°
Max speed: 2,2 km/h
Max totally traction force: 66,1 kN
HYDRAULIC JACKS Set of four. stroke 4x 450 mm in rear and front elephant foots incl.
EMERGENCY STOP DEVICE Always included in basic unit.
ASSEMBLY KIT ROT.HEAD DHR48H56-68 Note: rotary head is not incl. in kit
ROTARY HEAD DHR48H68-3 Rotation motors 2xOMSS250 Gear ratio : 4,31 :1 , Including floating sub 2 3/8 API Reg box
SELECTOR VALVE KIT
serial/parallell mode ROT. HEAD DHR48H68 given
Serial mode rot.: 0-80 RPM - Torque 2850Nm
Serial mode rot.: 0-40 RPM - Torque 5700Nm
Figures at 90 l/min and 175 Bar
HYD. ROD HOLDER AND BREAKER Incl. plate jaws. Free opening 250 mm. (Extend feed 360mm)
Gripping force 88,25 kN (19,730 lbf.) at 180bar
Breaking torque 23,8 kNm (5,400 lbf.) at 180 bar
HYD OPERATED DIVERTER HEAD DHR48, basic kit including cutting collector head, attachment and two hyd cylinder Guides and seals for ODEX strings not included, To be specified and ordered separately
GASKET DIVERTER HEAD tube 89mm
GUIDE KIT Diverter head for casings 178mm 7 ,
MAIN HOIST with short crown block
Hydraulically driven hoist HP6/E FH, with disc brake.Hydraulic
shut-off device for minimum rope capacity. Steel wire 10mm, L=30m.
Lifting hook. Short crown block Lebam type, to handle tubes in drill center.
Max. pull capacity 1st layer :10,0 kN
Max. lifting speed 1st layer :38m/min
HOLD BACK DEVICE new type
DTH HAMMER FOG LUBRICATOR LUBROSTAR type incl. high pressure air hose to swivel. Max. 30 bar operating pressure.
Lubrication oil tank holds 10 litres.
FOAM-WATER PUMP max flow 30 l/min Max delivery pressure 25 bar.
RIG CLEANING DEVICE
spray gun kit to be used in conjunction with foam water pump
SWIVEL 4.5-SI for mud drill activities
BELLIN PUMP type NG1200- L2PC max flow 660l/min at max 25 bar - rotor and stator fault
WANGEN mud pump with helical rotor, 470 L/min, 25 bar - rotor and stator fault
TILTABLE PIPE RACK 40PCS x 76mm x 3 tubes
7 BAR AIR OUTLET for grinder
HYDRAULIC OUTLET FOR WELDER
HYDRAULIC WELDING UNIT HWG 200-30 defective
ROUND JAWS SET FOR CASING OD 178 mm
HOLD BACK PRESSURE SYSTEM
drill pipe and accessories are sold separately
Listing

7,087 km
Drilling machine
Select37200 37200
Call
Year of construction: 2001, Condition: used, Dowel Drill
400V
6kW
6Bar
- Year: 2001
- Documentation available: Yes
Dq3Gq7
- CE mark available: Yes
- Serial number: 7251
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Glenn Smeets
Listing

6,957 km
Soil drill
Atlas CopcoRoc D3 Drill Rig WATCH VIDEO
Call
Condition: used, Year of construction: 2012, Field of application: Construction
Serial number: AV012A1055/8992 xxxx
Please contact ATS Norway AS for more information
Please provide reference number upon request: 18965
Specifications:
- 2012-Model
- Engine hours: approx. 9220
- Hammer hours approx. 3340
- Undercarriage (see pictures)
- Width: approx. 230 cm
- Winch
- Central grease
- Remote control
- Control system changed in 2018
- Ready for delivery.
Description:
Atlas Copco Roc D3 drilling rig from 2012.
The rig has recently been in operation and is working well.
The entire control system was replaced in 2018.
Rod assembly begins to wear.
Can be delivered within a short time.
Baipmqyoo
Listing

6,159 km
Horizontal drill
Ditch WitchJT520 / 1710MTH / 2008 / 1 OWNER!
Call
Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,710 h, For sale a newly purchased Ditch Witch Jt520 drill rig (equivalent to Vermeer D6X6/D7)
Fully functional
The price is for the drill rig itself (What is in the picture)
The drill rig plus the rods that are mounted
The price is given in Euro!
We also offer other drill rigs OR we are looking for more on request from the seller!
-
Technical data
Capacity 1.12 l
Compliance with EU STAGE IIIA emission standards
Engine cooling system
Entry angle
Fuel tank capacity 38 l
Fuel type
Ground speed 2.46 km/h
Height 1.69 m
Hydraulic tank capacity 30 l
Connection diameter 44.5 mm
Length 2.97 m
Length 1.5 m
Brand and model
Manufacturer's rated power in HP 24.5 kw
Maximum flow 18.9 l/min
Maximum pressure 34.5 bar
Maximum spindle speed
Maximum spindle torque 678 Nm
Min. bending radius 21.3 m
Min. bore diameter 63.5 mm
Number of cylinders
Pipe diameter 28 mm
Dpj2X7
Reverse thrust 22.2 kN
Nominal engine speed
Pressure 20 kN
Weight 1430 kg
Weight 16 pounds
Width 902 mm
Possibility to find transport in the European Union!
Attention!
The price given is in the net value and is valid for Export and for companies.
A large discount is possible for an individual customer -
We invite you to contact us directly by phone, so that you can get your best price :)
Listing

7,184 km
Soil drill
ABISM12/16B
Call
Condition: used, Year of construction: 2013, operating hours: 7,368 h, Equipment: air conditioning, General information
Field of application: Construction
Serial number: F095088
Drivetrain
Drive: Track
Make of engine: C15
Weights
Empty weight: 62.000 kg
Other information
EPA Marked: yes
EPA Marked: yes
Emission level: Stage IV / Tier IV final
Delivery terms: EXW
Transport dimensions (LxWxH): 18,105x3,4x3,5
Production country: DE
8Sdrcofkm
Additional information
Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information
Listing

3,859 km
Well drilling rig
PRIDEURB 3A-3M Hydraulic
Call
Condition: new, Functionality: fully functional, Year of construction: 2025, URB 3A-3M is a hydraulic drilling rig designed for:
✅ drilling of geophysical and structural exploration wells for oil and gas;
✅ exploration of deposits of solid minerals, building materials and groundwater;
✅ engineering and geological surveys;
✅ drilling of water intake and blast wells,
✅ wells of agricultural and industrial water supply, water reduction with direct washing of the face in rocks of soft and medium hardness.
👉🏻 The maximum drilling depth is up to 600 m.
👉🏻 Drilling is performed rotationally with flushing or purging of the well or augers.
👉🏻 The drilling rig is mounted on the chassis of an all-terrain vehicle and is powered by the vehicle's engine.
👉🏻 The drilling rig is designed for drilling wells in rocks of 1-12 categories.
The control of the drilling rig is fully hydrofected and concentrated on the driller's console. The control panel contains control devices and regulators for downhole forces, feed and lifting speeds, as well as the rotational speed of the rotator spindle.
_____
TECHNICAL SPECIFICATION
👉🏻 Main
Maximum drilling depth - Up to 600 m
Recommended pipe drilling diameter is 60.3 mm; 63.5mm for the drill hole, mm - Up to 450
The diameter of the casing pipes used, mm - 400, 280, 270, 225, 195
Length of drilling pipes, mm - Up to 4700
Lifting capacity of the winch for auxiliary operations, kg - 6300
3Xzfhc9Ye
👉🏻 Drilling equipment
Type - Hydraulic
Carriage stroke- 5400
The maximum number of revolutions on the spindle, rpm - 110
Maximum torque on the rotator, Nm - 8000
Maximum lifting force, kg - 10000
Maximum force at the bottom, kg - 5400
Operating pressure in the hydraulic system, MPa - 16
Listing

7,087 km
Drilling machine
Stegherr
Call
Condition: used, Dowel drill
Stegherr
Dowel unit dimensions 2900x850x1300 mm (LxHxW)
Table dimensions 1950x1700x2000 (LxWxH)
Bbfcxp8Ivk
BAUTZ drive system
- Documentation available: No
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Glenn Smeets
Listing

3,859 km
Drilling machine
PRIDEP20 PIT Rod Pusher
Call
Condition: new, Year of construction: 2025, The P20 PIT controlled rod pusher is one of the most optimal drilling rigs used in trenchless communication technologies in terms of compactness and power ratio.
✅ Its small dimensions allow it to work in narrow spaces, and a pulling force of twenty tons makes it possible to lay communications up to seventy meters long.
✅ P20 PIT works with drill rods six hundred and fifty centimeters long. The rod pusher is powered by its own oil station providing autonomous operation in the field.
✅ The rod pusher can work with metal and polyethylene pipes with a diameter of up to 273 millimeters.
✅ The entire operation process is controlled by an underground location system, which eliminates deviations and errors.
The ease of management, affordable price and high speed of operation make the P 20 PIT rod pusher one of the most popular HDD equipment on the market.
Additionally, the rod pusher can be equipped with the following tool:
➤ Pipe grippers;
➤ Drilling rods;
➤ Expanders of different diameters;
➤ The destroyer of cast iron pipes;
➤ Drilling Peak;
➤ The drilling pilot.
_____
TECHNICAL SPECIFICATION
Swing. Drilling length (m) - 70
Swing. Extension (mm) - 273
Drilling angle- 0-12°
Drilling rig weight (kg)- 250
Dq0Wc7
Crushing unit:
Swing. Traction force (kN) - 200
Swing. Torque (Nm) - 2000
Number of rpm - 10
Oil station:
Engine - Lifan model, 24 hp
Engine type - Petrol
Hydraulic system pressure (Bar) - 180
Engine power (kW) - 14.71
Barbell:
Length of drilling rods (m) - 650
Diameter of drilling rods (mm) - 50
Steel grade - 40X
Trust Seal
Through Machineseeker certified dealers

Listing

7,087 km
Drilling machine
MASVO50-1600 VO
Call
Year of construction: 1986, Condition: used, - Year: 1986
- Documentation available: No
- Serial number: 2181
- Control: Conventional
- Motor power: 4kW
- Drilling depth: 130mm
- Spindle speed max.: 2500rpm
- Tool holder: 45
- Table width: 750mm
- Table length: 1020mm
- Drilling capacity: 2mm
- Travel X: 1600mm
- Spindle diameter: 75mm
- Travel Z: 900mm
- Max. reach: 1600mm
- Number of axes: 2
- Spindle speed min.: 28rpm
Financial information
VAT: The price shown is exclusive of VAT
VAT/margin: VAT deductible for entrepreneurs
Delivery and trade-in always possible for everything in the industrial sectors
Dq2Ckp
Bram van Summeren
Listing

3,859 km
Well drilling rig
PRIDEURB 2A2
Call
Condition: new, Functionality: fully functional, Year of construction: 2025, The drilling rig URB 2A2 is designed for drilling wells for various purposes:
✅ drilling of geophysical and structural exploration wells for oil and gas;
✅ exploration of deposits of solid minerals, building materials and groundwater;
✅ engineering and geological surveys;
✅ drilling of water intake and blast wells.
_____
➤ Drilling is performed in a rotational manner with flushing or purging of the well, or with augers.
➤ A hydraulic rotator moving along the mast is used for drilling, building up the drilling tool without detaching from the face and performs, together with the hydraulic lift, the work of lowering (lifting) the tool and feeding it during drilling. The rotator moves along the mast using a hydraulic cylinder and a hoisting system.
➤ The control of the drilling rig is fully hydrofected and concentrated on the driller's console. The control panel contains control devices and regulators for downhole forces, feed and lift speeds, as well as the rotational speed of the rotator spindle.
_____
Specifications:
➤ Conditional drilling depth, m:
• structural exploration wells with flushing - 300
• geophysical wells: with flushing - 100, with purging - 60, augers - 40
➤ Initial diameter of drilling with flushing, mm - 190
➤ The final diameter of drilling with flushing, mm:
• of structural prospecting wells - 93
• geophysical wells - 118
➤ Diameter of drilling with purge, mm - 118
➤ Drilling diameter with augers, mm - 135
➤ The rotation speed of the drilling projectile, rpm - 90, 180
➤ Maximum torque, N*m - 2500
➤ Rotator feed stroke, mm - 5200
3Uzhsunh8
➤ The lifting speed of the drilling projectile, m/s - 0-1,1
➤ Operating pressure in the hydraulic system, MPa - 1.6
➤ Lifting capacity of the hydraulic cylinder for lifting the mast, N (kgf) - 58800 (6000)
➤ Lifting force, kg - 4600
➤ Downward feed force, kg - 2600
Listing

3,859 km
Well drilling rig
PRIDETITAN 60
Call
Condition: new, Functionality: fully functional, fuel type: diesel, Year of construction: 2025, Hydraulic drilling rig for drilling water wells, geophysical survey, and injection wells up to 200 m deep.
Powerful, compact rig to solve serious problems!
Any configuration is possible based on your drilling aim and budget.
_____
✅ TITAN series - self-propelled, on a tracked platform;
____
👉🏻The hydraulic drilling rig is used for drilling water wells up to 200 m deep, including inclined, geological surveys, drilling holes for installing fences, foundations, engineering surveys, screwing piles, carrying out construction work.
The drilling rig is equipped with a drilling mud supply unit for flushing or compressed air supply for purging and air hammer operation.
The installation is easily controlled using a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool.
The installation can be equipped with
- remote control panel;
- hydraulic auxiliary winch;
- hydraulic outriggers;
- drilling pump;
- casing table;
- a descent/ascent overcoming system with an angle of up to 45 degrees (for the TITAN series on a tracked platform)
_____
Specifications:
📌 OPERATING
Max. initial diameter, mm - 300
Max drilling depth, m - 200
Dimensions, mm:
- Length 4500
- Width 1600
- Height 2200
Mass, kg - 1800
📌 SWIVEL
Type - Hydraulic oil motor with mounting group
Rotative moment, (Нм) - 2000 (optionally till 4000)
Rotation speed, (sev/min) - I gear 0-330 / II gear 0-165
MAST Pulling force, (kg) - up: 5000 / down: 2000
Carriage movement, (mm) - 1680, 2200
Cxiqbokesi
Speed, m/sec - 0,43; 0,42
📌HIGH-PRESSURE PUMP STATION
Type - Diesel Power, 60 hp
📌 CHASSIS
Type of crawlers - rubber-metal
Width of crawler, mm - 260
Speed, km/h - 6
📌OPTION MODULE
• Hydroclamp of drilling pipe optionally
• Hydroclamp of casing pipe optionally
• Hydraulic casing oscillator optionally
• Mechanical outriggers optionally
• Hydraulic outriggers optionally
• Wrench optionally
• Anchoring system optionally
Listing

3,859 km
Well drilling rig
PRIDETRAILER 60
Call
Condition: new, Functionality: fully functional, fuel type: diesel, Year of construction: 2025, Hydraulic drilling rig for drilling water wells, geophysical survey, and injection wells up to 200 m deep.
Powerful, compact rig to solve serious problems!
Any configuration is possible based on your drilling aim and budget.
_____
✅ TRAILER series - mounted on a single-axle or two-axle trailer.
_____
👉🏻The hydraulic drilling rig is used for drilling water wells up to 200 m deep, including inclined, geological surveys, drilling holes for installing fences, foundations, engineering surveys, screwing piles, carrying out construction work.
The drilling rig is equipped with a drilling mud supply unit for flushing or compressed air supply for purging and air hammer operation.
The drilling rig is easily controlled using a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool.
The installation can be equipped with
- hydraulic auxiliary winch;
- hydraulic outriggers;
- drilling pump;
- casing table.
_____
Specifications:
📌 OPERATING
Max. initial diameter, mm - 300
Max drilling depth, m - 200
Dimensions, mm:
- Length 3700
- Width 1350
- Height 1800
Mass, kg - 1700
📌 SWIVEL
Type - Hydraulic oil motor with mounting group
Rotative moment, (Нм) - 2000 (optionally till 4000)
Rotation speed, (sev/min) - I gear 0-330 / II gear 0-165
MAST Pulling force, (kg) - up: 5000 / down: 2000
Carriage movement, (mm) - 1680, 2200
Speed, m/sec - 0,43; 0,42
📌HIGH-PRESSURE PUMP STATION
Dq0V9P
Type - Diesel Power, 60 hp
📌 CHASSIS
Truck (trailer)
Width of crawler, mm - 260
Speed, km/h - 6
📌OPTION MODULE
• Hydroclamp of drilling pipe optionally
• Hydroclamp of casing pipe optionally
• Hydraulic casing oscillator optionally
• Mechanical outriggers optionally
• Hydraulic outriggers optionally
• Wrench optionally
• Anchoring system optionally
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used Drill systems (108)
Search Machineseeker now with more than 2,00,000 used machines:This may be of interest to you

Find out now
+44 20 806 810 84
+44 20 806 810 84
Create listing
*per listing / month